Altec Lansing 120

Altec Lansing 120 Satellite Speaker System Instruction Manual

Įvadas

The Altec Lansing 120 is a two-satellite speaker system designed to enhance the audio experience for various devices. This system provides clear sound for personal computers, video gaming systems, portable CD players, MP3 players, and other audio sources. Its compact design and simple connectivity make it a versatile audio solution.

Pagrindinės funkcijos:

  • 2 Watts total Continuous Power output.
  • Compatibility with multiple audio sources including PCs, gaming systems, portable CD players, and MP3 players.
  • Integrated Power On/Off and Master Volume controls for easy operation.
  • Convenient Headphone Jack for private listening.
  • Shielded Satellites to prevent interference with other electronic devices.

Pakuotės turinys

Prašome patikrinti, ar pakuotėje yra visi reikalingi daiktai:

  • Two (2) Altec Lansing 120 Satellite Speakers
  • One (1) Audio Input Cable (3.5mm stereo jack)
  • Vienas (1) kintamosios srovės maitinimo adapteris

Sąrankos instrukcijos

Follow these steps to set up your Altec Lansing 120 speaker system:

  1. Garsiakalbio vieta: Place the two satellite speakers on a stable, flat surface, ideally on either side of your listening area (e.g., computer monitor, TV) for optimal stereo sound. Ensure they are positioned to direct sound towards you.
  2. Prijunkite prie maitinimo: Plug the AC power adapter into the designated power input port on one of the satellite speakers. Then, plug the other end of the power adapter into a standard wall electrical outlet.
  3. Prisijunkite prie garso šaltinio: Locate the 3.5mm audio input jack on the back of the primary satellite speaker. Connect one end of the supplied audio input cable to this jack. Connect the other end of the audio cable to the audio output jack (typically green) on your PC, gaming console, portable CD player, or MP3 player.
Altec Lansing 120 Satellite Speakers connected to a device

Image: The Altec Lansing 120 satellite speakers, showing their compact design and typical setup next to a computer monitor. The image illustrates the two speakers with their cables connected, ready for use.

Naudojimo instrukcijos

Once the speakers are set up, follow these steps for operation:

  • Maitinimo įjungimas/išjungimas: Locate the integrated power control (often combined with the volume knob) on the primary satellite speaker. Turn the knob clockwise to power on the speakers. Turn it counter-clockwise until it clicks to power off.
  • Garso reguliavimas: Rotate the master volume control knob on the primary satellite speaker to increase or decrease the sound level. It is recommended to start with a low volume and gradually increase it to a comfortable listening level. Also, ensure the volume on your audio source device (PC, MP3 player, etc.) is adequately adjusted.
  • Ausinių lizdo naudojimas: For private listening, plug your headphones into the headphone jack located on the primary satellite speaker. Plugging in headphones will automatically mute the speaker output. Unplugging the headphones will restore sound through the speakers.

Priežiūra

To ensure the longevity and optimal performance of your Altec Lansing 120 speaker system, follow these maintenance guidelines:

  • Valymas: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
  • Vėdinimas: Ensure that the speakers are placed in an area with adequate ventilation. Do not block any vents or openings on the speaker enclosures.
  • Saugykla: If storing the speakers for an extended period, disconnect them from power and audio sources. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Kabelio priežiūra: Avoid sharply bending or crimping the power and audio cables. Regularly check cables for any signs of wear or damage.

Trikčių šalinimas

Jei kyla problemų dėl garsiakalbių sistemos, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

ProblemaGalima priežastisSprendimas
Iš garsiakalbių nėra garso
  • Garsiakalbiai neįjungti.
  • Volume too low on speakers or audio source.
  • Garso kabelis netinkamai prijungtas.
  • Ausinės prijungtos.
  • Įsitikinkite, kad garsiakalbiai įjungti.
  • Increase volume on both speakers and audio source.
  • Patikrinkite visas garso kabelio jungtis.
  • Unplug headphones from the jack.
Iškraipytas arba neaiškus garsas
  • Garsas per didelis.
  • Prastos kokybės garso šaltinis.
  • Atsilaisvinę kabelių jungtys.
  • Lower the volume on speakers and/or audio source.
  • Išbandykite kitą garso šaltinį arba file.
  • Įsitikinkite, kad visi laidai yra tvirtai prijungti.
Veikia tik vienas garsiakalbis
  • Loose connection to the non-working speaker.
  • Sugedęs garso laidas.
  • Check the connection of the non-working speaker to the primary speaker.
  • Jei įmanoma, išbandykite kitą garso kabelį.

Specifikacijos

Technical details for the Altec Lansing 120 Satellite Speaker System:

FunkcijaDetalė
Prekės ženklasAltec Lansing
Modelio numeris120
Garsiakalbio tipasPalydovas
Ryšio technologijaLaidinis
Montavimo tipasLaisvai stovintis, kištukas
Maitinimo šaltinisSu laidu elektra
Kontrolės metodasNuotolinis (Note: Refers to integrated controls, not a separate remote unit)
SpalvaJuoda
UPC021986940029

Garantija ir palaikymas

For detailed warranty information, product registration, and technical support, please visit the official Altec Lansing websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą bet kokiems garantiniams reikalavimams.

Pastaba: konkrečios garantijos sąlygos gali skirtis priklausomai nuo regiono ir mažmenininko.

© 2024 Altec Lansing. Visos teisės saugomos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.