Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Įvadas

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Saugos informacija

ĮSPĖJIMAS: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Prieš montuodami įsitikinkite, kad maitinimas yra atjungtas.
• Laikykitės visų vietinių ir nacionalinių elektros taisyklių.
• Šis prietaisas skirtas naudoti tik patalpose.

Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Tvirtinimo varžtai
• Vielos veržlės
• Instrukcijų vadovas (šis dokumentas)

Sąranka ir diegimas

Reikalingi įrankiai: Screwdriver, Wire Strippers, Electrical Tape.

1. Išjungti maitinimą: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage testeris.
2. Pašalinti esamą jungiklį: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Vaizdas: priekis view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Linijos laidas: Connect to the timer's LINE terminal.
   • Įkrovimo laidas: Connect to the timer's LOAD terminal.
   • Žemės viela: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Laikmačio montavimas: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Atkurti maitinimą: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Valdymas ir programavimas

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Dabartinio laiko ir dienos nustatymas

1. Paspauskite LAIKRODIS mygtuką. Laiko ekranas mirksės.
2. Naudokite VALANDA ir MINUTĖ mygtukais, kad sureguliuotumėte dabartinį laiką.
3. Paspauskite DIENA mygtuką, norėdami nustatyti dabartinę savaitės dieną.
4. Paspauskite LAIKRODIS again to save and exit, or wait a few seconds for it to save automatically.

2. ĮJUNGIMO/IŠJUNGIMO įvykių programavimas

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Paspauskite PROG mygtuką. Ekrane bus rodoma „1 ON“.
2. Naudokite VALANDA, MINUTĖ, ir DIENA buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Paspauskite PROG dar kartą. Ekrane bus rodoma „1 OFF“.
4. Set the desired OFF time and day(s) for Program 1 using the VALANDA, MINUTĖ, ir DIENA mygtukai.
5. Repeat steps 1-4 for additional programs (2 ON/OFF through 6 ON/OFF).
6. Nustatę visas norimas programas, paspauskite LAIKRODIS grįžti prie normalaus veikimo.

3. Rankinis nepaisymas

To manually turn the connected device ON or OFF outside of programmed times, press the ĮJUNGTA/IŠJUNGTA button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Priežiūra

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Baterijos keitimas: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Valymas: Clean the timer's surface with a soft, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.

Trikčių šalinimas

Specifikacijos

• Prekinis ženklas: Intermatic
• Modelio numeris: SS7C
• Prekės svoris: 0.35 svaro
• Nustatymų skaičius: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Ekrano dydis: 1.5 colių
• Spalva: Baltas
• Gamintojas: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Garantija ir palaikymas

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1 metų ribota gamintojo garantija nuo pirkimo datos. Ši garantija apima medžiagų ir gamybos defektus normaliai naudojant.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic websvetainėje arba žr. kontaktinę informaciją, pateiktą ant produkto pakuotės.