Westek 6043BC Touch Pad Dimmer Instruction Manual

Įvadas

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Produkto savybės

Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
Reguliuojamas ryškumas: Offers three distinct light settings, ranging from a low night light to full brightness.
Patogus dizainas: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
Šiuolaikinis stilius: Features a contemporary black finish and sleek design that complements various home decors.
Lengvas montavimas: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Saugos informacija

Please read and understand all instructions before installation and use. Retain this manual for future reference.

Naudoti tik patalpose.
Neviršykite didžiausios galiostage of 200 Watts for incandescent bulbs.
Įsitikinkite, kad lamp is unplugged from the wall outlet before installation.
Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
Do not use this dimmer control with another dimmer in the same circuit.
Laikyti atokiai nuo vandens ir drėgmės.

Sąranka ir diegimas

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

Paruoškite L.amp: Užtikrinkite savo lamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
Connect the Dimmer: Prijunkite lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
Prijunkite prie sieninio lizdo: Plug the dimmer unit into a standard wall outlet.
Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.

Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Naudojimo instrukcijos

Once installed, operate the dimmer as follows:

Turn On/Adjust Brightness: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
Išjungti: After the high brightness setting, touching the pad again will turn the lamp išjungti.
Galia Outage: Esant galiai outage, the dimmer may reset. Simply touch the pad to resume normal operation.

Priežiūra

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Trikčių šalinimas

Problema	Galima priežastis	Sprendimas
Lamp does not turn on or dim.	Lamp not properly plugged into dimmer. Dimmer not properly plugged into wall outlet. Lamp's internal switch is off. Incompatible bulb (LED/CFL). Sugedusi lemputė. Galia tautage or circuit breaker tripped.	Užtikrinti lamp cord is fully inserted into the dimmer. Ensure dimmer is fully inserted into a working wall outlet. Pasukite lamp's original switch to the ON position. Replace with a standard incandescent bulb (up to 200W). Pakeiskite lemputę. Check your home's power supply and circuit breakers.
Lamp flickers or buzzes.	Incompatible bulb (LED/CFL). Atsilaisvinęs lemputės prijungimas.	Replace with a standard incandescent bulb (up to 200W). Priveržkite lemputę į jos lizdą.
Lamp turns on by itself occasionally.	Electrical interference (e.g., during thunderstorms, power fluctuations).	This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Specifikacijos

Modelis: 6043 m.pr.Kr
Prekinis ženklas: Westek
Veikimo režimas: ON-NONE-OFF (3-level dimming)
Maksimali galiatage: 200 Watts (Incandescent bulbs only)
ttage: 120V, 60Hz
Kontrolės metodas: Palieskite
Prekės matmenys (I x P x A): 3.9 x 1 x 7.9 colio
Prekės svoris: 3.8 uncijos
Medžiaga: Multi (Brass contact material)
Spalva: Juoda
Naudoti tik patalpose: Taip

Garantija ir palaikymas

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek websvetainėje arba susisiekite su klientų aptarnavimo skyriumi.

Gamintojas: AmerTac

Klientų aptarnavimas: 201.661.9945

Websvetainė: www.amertac.com

Westek 6043BC