Produktas baigtasview
The Prime-Line E 2103 Cylinder Lock is a 1-1/4 inch brass cylinder lock designed for use in surface-mounted sliding patio door handle sets. It features Schlage-shaped keys and a hardened cut-away tailpiece. This lock is intended as a replacement part to enhance the security and functionality of your patio door.
Pagrindinės savybės
- Designed for patio door handles and door deadbolt replacements.
- Features a 5-pin tumbler lock mechanism.
- Constructed with a solid brass housing and a 5/8 inch chrome face.
- Includes Schlage-shaped keys.
- Cylinder length of 1-1/4 inch with a hardened break-away 1-7/8 inch tailpiece, which may require trimming for proper fit.
- Works with vertical and 45-degree keyways (angle determined when latch is extended to the locked position).
Pakuotės turinys
- 1 x Prime-Line E 2103 Cylinder Lock
- 2 x Schlage-shaped keys
Svarbi saugos informacija
ĮSPĖJIMAS: Šis produktas gali jus paveikti cheminėmis medžiagomis, kurios, kaip žinoma Kalifornijos valstijoje, sukelia vėžį ir kenkia reprodukcinei sistemai. Daugiau informacijos rasite apsilankę www.P65Warnings.ca.gov.
Matmenys
Refer to the diagram below for detailed measurements to ensure compatibility with your door hardware.
Vaizdas: Detailed diagram showing the dimensions of the Prime-Line E 2103 Cylinder Lock, including overall length, tailpiece length, and diameter.
- Bendri matmenys (I x P x A): 3.42 x 0.62 x 1.06 colio
- Cylinder Length: 1-1/4 colio
- Tailpiece Length: 1-7/8 inches (may need trimming)
- Cylinder Outer Diameter (O.D.): 5/8 colių
Montavimas
- Measure Your Door: Before beginning, accurately measure your door's backset, cross bore, and thickness to confirm the lock's compatibility. This lock is designed for surface-mounted sliding patio door handle sets.
- Sausas pritaikymas: Always dry fit the cylinder lock into your handle set before final assembly. This allows you to check for proper alignment and identify if the tailpiece requires trimming.
- Tailpiece Trimming (If Necessary): If the key binds or the lock does not operate smoothly during the dry fit, the tailpiece may be too long. Carefully trim the hardened break-away tailpiece to the appropriate length using a suitable cutting tool (e.g., hacksaw) and file down any rough edges. Ensure the tailpiece allows for smooth operation without excessive pressure.
- Insert Cylinder: Insert the cylinder lock into the handle set, ensuring the keyway is correctly oriented. The lock works with vertical and 45-degree keyways, with the angle determined when the latch is in the locked position.
- Saugus surinkimas: Reassemble your patio door handle set according to its specific instructions, ensuring the cylinder lock is securely in place. Avoid over-tightening screws, as this can cause binding and hinder lock operation.
- Bandomoji operacija: After installation, test the lock and unlock functions multiple times with the provided keys to ensure smooth and secure operation.
Vaizdas: Diagram illustrating the components of a cylinder lock installation, showing the tailpiece, plug, and how the cylinder fits into a door handle assembly.
Vaizdas: The Prime-Line E 2103 Cylinder Lock shown in relation to a patio door handle (handle not included), highlighting the 5/8 inch O.D. of the cylinder and the 5/8 inch I.D. of the handle opening.
Operacija
To operate the Prime-Line E 2103 Cylinder Lock, simply insert one of the provided Schlage-shaped keys into the keyway. Turn the key to engage or disengage the locking mechanism of your patio door handle set. Ensure the key turns smoothly without excessive force.
Priežiūra
- Keep the keyway clean and free of debris.
- Periodically apply a small amount of graphite lubricant or a silicone-based lock lubricant into the keyway to ensure smooth operation. Avoid oil-based lubricants as they can attract dirt.
- Inspect the tailpiece and cylinder for any signs of wear or damage. Replace the lock if significant wear is observed.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Key binds or is difficult to turn. | Tailpiece is too long or handle screws are overtightened. | Remove the lock and re-evaluate the tailpiece length. Trim if necessary. Loosen handle assembly screws slightly to relieve pressure. Apply lock lubricant. |
| Lock does not engage/disengage fully. | Incorrect tailpiece length or improper installation. | Ensure the tailpiece is correctly sized and the cylinder is properly seated within the handle mechanism. Re-check installation steps. |
| Key does not fit or is loose. | Using an incorrect key or a worn key. | Ensure you are using one of the provided Schlage-shaped keys. If the key is worn, consider replacing the lock. Note: This lock is not compatible with all Schlage keys and cannot be rekeyed to match other Schlage locks. |
Specifikacijos
| Specifikacija | Detalė |
|---|---|
| Prekinis ženklas: | PRIME-LINE |
| Modelio numeris: | E 2103 |
| Užrakto tipas: | Raktų užraktas |
| Medžiaga: | Žalvaris |
| Baigti: | Chrome face |
| Cylinder Length: | 1-1/4 colio |
| Tailpiece Length: | 1-7/8 inches (break-away) |
| Prekės svoris: | 2.88 uncijos |
| UPC: | 049793021038 |
Garantija ir palaikymas
Gamintojo garantija: Goods are warranted against manufacturing defects for 1 year from the date of purchase. Prime-Line is not responsible for user-related damage or damage incurred during installation. The warranty is void if products are subjected to abnormal conditions, misapplication, or abuse.
For additional support or to explore other Prime-Line products, please visit the official PRIME-LINE Store.