1. Produktas baigtasview
The Delta Innovations Series H64 faucet handle base features a gentle curve and a slight flare, designed to complement various faucet styles. This handle is part of Delta's Less Handle Program, allowing for customization by pairing it with a separate accent piece (model A64, sold separately) to complete the faucet handle assembly.
Pagrindinės savybės
- Designed for use with select Less Handle Program models.
- Requires a separate accent piece (A64) for a complete handle assembly.
- Constructed from durable metal for longevity.
2. Saugos informacija
Prieš montuodami ir naudodami, atidžiai perskaitykite visas instrukcijas. Nesilaikant šių instrukcijų, galite sugadinti turtą arba susižaloti.
- Always turn off the main water supply before attempting any installation or repair.
- Montavimo metu dėvėkite tinkamas asmenines apsaugos priemones, tokias kaip apsauginiai akiniai.
- Jei abejojate dėl kurios nors montavimo proceso dalies, kreipkitės į kvalifikuotą santechniką.
- Įsitikinkite, kad visos jungtys yra tvirtos, kad išvengtumėte nuotėkio.
3. Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- H64 Faucet Handle Base (1)
- Aerator (1) - Note: The accent piece, model A64, is sold separately and is required for a complete handle assembly.
4. Montavimo instrukcijos
Reikalingi įrankiai
- Reguliuojamas veržliaraktis
- „Phillips“ atsuktuvas
- Plumber's Tape (optional, for threaded connections)
- Minkštas audinys
Pasiruošimas
- Turn off the water supply to the faucet at the shut-off valves under the sink or at the main water supply.
- Clear the workspace around the faucet.
- If replacing an existing handle, remove the old handle and clean the faucet stem area thoroughly.
Žingsnis po žingsnio diegimas
- Position the Handle Base: Carefully place the H64 handle base onto the faucet stem. Ensure it sits flush against the faucet body.
- Secure the Handle Base: Locate the set screw on the side or back of the handle base. Use a Phillips head screwdriver to tighten the set screw, securing the handle base firmly to the faucet stem. Do not overtighten.
- Attach Accent Piece (A64, sold separately): If you have the A64 accent piece, follow its specific instructions to attach it to the H64 handle base. This typically involves aligning and snapping it into place or securing it with an additional screw.
- Bandomoji operacija: Once the handle is fully assembled, slowly turn on the water supply. Check for any leaks around the handle base and connections. Operate the handle to ensure smooth movement and proper water flow.
5. Operacija
To operate the faucet, grasp the H64 handle and rotate it to control water flow and temperature. The direction of rotation for hot and cold water may vary depending on the specific faucet body it is paired with. Typically, rotating the handle counter-clockwise increases water flow and moves towards hotter temperatures, while clockwise rotation decreases flow and moves towards colder temperatures.
6. Priežiūra ir priežiūra
Proper care will help maintain the finish and functionality of your Delta H64 faucet handle.
- Valymas: Reguliariai valykite chromuotą paviršių minkšta šluosteamp šluoste. Įsisenėjusioms dėmėms naudokite švelnų muilo tirpalą ir kruopščiai nuplaukite švariu vandeniu.
- Venkite griežtų valiklių: Do not use abrasive cleaners, harsh chemicals, ammonia-based products, or scouring pads, as these can damage the chrome finish and void the warranty.
- Džiovinimas: After cleaning, dry the handle with a soft cloth to prevent water spots.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Rankena atsilaisvinusi arba nestabili. | Fiksavimo varžtas atsilaisvinęs. | Tighten the set screw on the handle base with a Phillips head screwdriver. |
| Difficulty turning the handle. | Mineral buildup or internal faucet valve issue. | Clean around the handle base. If the issue persists, the problem may be with the faucet's internal valve, which is separate from the handle. Consult a plumber or the faucet's instruction manual. |
| Water leaks from around the handle base. | Improper installation or worn internal seals (not part of the handle). | Ensure the handle base is securely installed. If leaks persist, the issue is likely with the faucet's valve or O-rings, which are internal components of the faucet body, not the handle itself. Professional assistance may be required. |
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | DELTA |
| Modelio pavadinimas | H64 |
| Modelio numeris | H64 |
| Apdailos tipas | Chrome |
| Medžiaga | Metal (Zinc) |
| Rankenų skaičius | 1 |
| Įtraukti komponentai | Handle, Aerator |
| Montavimo tipas | Denio kalnas |
| UPC | 034449363143 |
9. Garantija ir palaikymas
Gamintojo garantija
This Delta Faucet H64 handle is covered by a Ribota viso gyvenimo garantija. Please refer to the official Delta Faucet warranty documentation for complete terms and conditions, including coverage details and limitations.
Pagalba klientams
For technical assistance, replacement parts, or warranty claims, please contact Delta Faucet customer service. Contact information can typically be found on the official Delta Faucet website or by searching for "Delta Faucet customer support" online.