Teknetics T2LTD-BLK Special Edition Metal Detector User Manual

Įvadas

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Teknetics T2LTD-BLK Special Edition Metal Detector. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

The Teknetics T2LTD-BLK is designed for advanced metal detection, offering exceptional depth and speed for coin shooting and relic hunting. It features dual DD search coils (5-inch and 11-inch) and trigger-actuated pinpointing for precise target location.

Svarbi saugos informacija

• Always exercise caution when digging to avoid underground utilities or hazardous objects.
• Do not operate the detector in thunderstorms or severe weather conditions.
• Keep the control housing dry. The search coils are waterproof, but the control housing is not.
• Naudokite tik rekomenduojamas baterijas.
• This device is heavy and may cause strain or injury if not handled properly. Maintain proper posture and take breaks during extended use.

Produkto komponentai

Your Teknetics T2LTD-BLK package includes the following main components:

• Control Housing with Display
• Viršutinė stiebo dalis
• Apatinis stiebas
• Porankis
• 11-inch DD Waterproof Search Coil
• 5-inch DD Waterproof Search Coil
• Coil Mounting Bolt and Washers

Image: Teknetics T2LTD-BLK Metal Detector with both 5-inch and 11-inch DD coils. This image shows the complete metal detector assembly, including the control unit, shaft, armrest, and both the larger 11-inch DD search coil and the smaller 5-inch DD search coil.

Sąranka ir surinkimas

1. Pritvirtinkite paieškos ritę:

   Secure the desired search coil (11-inch or 5-inch DD) to the lower stem using the provided non-metallic bolt and washers. Ensure it is snug but do not overtighten.

2. Assemble the Stems:

   Insert the lower stem into the upper stem. Adjust the length to a comfortable position for your height, ensuring the search coil is parallel to the ground when held naturally.

3. Valdymo korpuso montavimas:

   Slide the control housing onto the upper stem. The armrest should be positioned to support your forearm comfortably.
4. Prijunkite ritės kabelį:

   Wrap the search coil cable securely around the stem, leaving enough slack for coil movement. Plug the connector into the receptacle on the control housing. Ensure the connection is firm.

5. Įdėkite baterijas:

   The T2LTD-BLK requires 4 AA batteries. Open the battery compartment on the control housing and insert the batteries, observing proper polarity. Close the compartment securely.

Vaizdas: Stambus planas view of the Teknetics T2LTD-BLK control panel. This image highlights the digital display, showing target ID, sensitivity, discrimination settings, and battery indicator. The control knob and menu button are also visible.

Naudojimo instrukcijos

Maitinimo įjungimas/išjungimas

To power on the detector, press and hold the MENU button. To power off, press and hold the MENU button again until the display turns off.

Pagrindiniai veikimo režimai

• Visų metalų režimas: Detects all types of metal. Ideal for finding deeply buried targets or when the target material is unknown.
• Diskriminacijos režimas: Allows the user to filter out unwanted metals (e.g., iron) and focus on specific target types.

Pagrindiniai nustatymai

• Jautrumas: Adjusts the detector's ability to detect targets. Higher sensitivity increases depth but can also increase false signals in mineralized ground.
• Discrimination Level: Sets the rejection level for unwanted metals. Higher levels reject more ferrous items.
• Žemės balansas: Essential for stable operation in mineralized soil. The T2LTD-BLK features manual ground balance. Refer to the detailed manual for specific ground balancing procedures.
• Tonų skaičius: Selects the audio tone response for different target IDs.

Trigger-Actuated Pinpointing

To pinpoint a target, center the search coil over the detected object. Pull and hold the trigger located under the control housing. Slowly move the coil in a cross-pattern over the target. The audio tone will peak, and the target ID will stabilize when the coil is directly over the center of the object.

Priežiūra ir priežiūra

• Valymas: Nuvalykite detektorių reklamaamp po kiekvieno naudojimo nuvalykite šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Saugykla: Store the detector in a dry, cool place. Remove batteries if storing for extended periods to prevent leakage.
• Ritės priežiūra: The search coils are waterproof and can be rinsed with fresh water. Ensure the coil cable connection to the control housing remains dry.
• Baterijos keitimas: Pakeiskite baterijas, kai ekrane pasirodo išsikrovusių baterijų indikatorius.

Trikčių šalinimas

Specifikacijos

Informacija apie garantiją

Teknetics products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Teknetics websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

Pagalba klientams

For technical assistance, troubleshooting beyond this manual, or spare parts, please contact Teknetics customer support. You can find contact information on the official Teknetics websvetainėje arba per įgaliotąjį pardavėją.

Official Teknetics Websvetainė: Teknetics Store on Amazon