Audio-Technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable

Įvadas

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

Pagrindinės funkcijos:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

Pakuotės turinys

• AT-LP60 Turntable Unit
• Apsauga nuo dulkių
• Lėkštė su pavaros diržu
• Slydimo kilimėlis
• 45 RPM adapteris
• RCA garso kabelis
• Maitinimo adapteris

Sąrankos instrukcijos

1. Išpakavimas: Atsargiai išimkite visus komponentus iš pakuotės. Išsaugokite pakuotę būsimam transportavimui ar saugojimui.
2. Plokštės montavimas: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. Diržo montavimas: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Place the felt slip mat on top of the platter.
5. Dulkių dangtelio priedas: Attach the hinged dust cover to the back of the turntable.
6. Garso jungtis: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. Maitinimo jungtis: Connect the power adapter to the turntable and then to a wall outlet.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

Naudojimo instrukcijos

1. Maitinimas: Ensure the turntable is connected to power and your audio system is on.
2. Vietos įrašas: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. Select Record Size: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. Pasirinkite greitį: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. Start Playback (Automatic): Paspauskite PRADĖTI button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. Stop Playback (Automatic): Paspauskite STOP button. The tonearm will automatically lift, return to its rest, and the platter will stop spinning.
7. Manual Cueing: To manually place the stylus, use the TONO ŽENKLAS lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

Priežiūra

• Apsauga nuo dulkių: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• Rašiklio priežiūra: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• Turntable Body: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Diržo keitimas: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

Trikčių šalinimas

• Nėra galios: Įsitikinkite, kad maitinimo adapteris yra tvirtai prijungtas tiek prie patefono, tiek prie veikiančio elektros lizdo.
• Nėra garso arba mažas garsas:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Check the volume level on your audio system.
• Skipping or Distorted Sound:
  • Kruopščiai nuvalykite įrašą.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • Ensure the turntable is placed on a stable, level surface.
• Platter Not Spinning:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

Specifikacijos

Garantija ir palaikymas

The Audio-Technica AT-LP60 turntable comes with a 1 metų garantija nuo pirkimo datos. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official websvetainėje arba kontaktinę informaciją, pateiktą jūsų produkto pakuotėje.

You can also visit the official Audio-Technica website for FAQs, additional resources, and product registration.