WAC Lighting TK-103LED Line Voltage Track Head Instruction Manual

1. Įvadas

This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting TK-103LED Line Voltage Track Head with 8W GU10 LED Bulb. Please read all instructions carefully before installation and retain this manual for future reference. This product is designed for indoor use only.

2. Saugos informacija

ĮSPĖJIMAS: Kad sumažintumėte gaisro, elektros smūgio ar asmenų sužalojimo riziką, laikykitės šių nurodymų:

• Prieš montuodami ar atlikdami techninę priežiūrą, įsitikinkite, kad maitinimas yra išjungtas grandinės pertraukikliu.
• Visos elektros jungtys turi atitikti vietinius kodeksus, potvarkius arba Nacionalinį elektros kodeksą (NEC). Jei nesate susipažinę su tinkamu elektros laidų prijungimu, pasitarkite su kvalifikuotu elektriku.
• Nemontuokite šio įrenginio drėgnoje ar sausoje vietoje.amp locations. This product is rated for dry locations only.
• Nebandykite keisti ar modifikuoti įrenginio. Bet kokie pakeitimai gali panaikinti garantiją ir sukelti pavojų saugai.
• 65 pasiūlymas Įspėjimas: Šiame produkte gali būti chemikalų, kuriuos Kalifornijos valstija žino apie vėžį, apsigimimus ar kitokią žalą reprodukcijai.

3. Produktas baigtasview

The WAC Lighting TK-103LED is a line voltage track head designed for use with 120V track systems. It features a durable formed metal construction with a polycarbonate track adaptor and includes an 8W GU10 LED bulb. The fixture offers versatile aiming with 350-degree horizontal rotation and 90-degree vertical tilt, allowing for precise light direction.

1 pav.: Gaminio matmenys
This diagram illustrates the dimensions of the WAC Lighting TK-103LED track head. The fixture measures approximately 4 11/16 inches in height when pointed downwards, and 5 7/16 inches when angled. The base width is 3 1/16 inches. The track adapter section is 1 3/8 inches wide and 1 1/8 inches high. The light head itself is 2 5/8 inches deep.

4. Sąranka ir diegimas

This track head is designed for ceiling mount installation on 120V track systems. It is compatible with H, J/J2, and L track configurations. Ensure you have the correct track type for your installation.

4.1 Įtraukti komponentai

• Track fixture (with pre-installed 8W GU10 LED bulb)
• Montavimo instrukcijos

4.2 diegimo žingsniai

1. Išjungti maitinimą: Before beginning installation, ensure the power to the track system is completely OFF at the circuit breaker.
2. Identify Track Type: Verify your track system is a 120V H, J/J2, or L type track. The track head adaptor is designed to fit these specific types.
3. Insert Track Head: Align the track head adaptor with the track slot. Push the adaptor firmly into the track and twist it to lock it into place. Ensure the electrical contacts on the adaptor engage properly with the track conductors.
4. Saugus tvirtinimas: Tighten any aiming screws or locking mechanisms on the track adaptor to secure the fixture's position on the track.
5. Atkurti maitinimą: Kai armatūra bus saugiai sumontuota, atkurkite elektros tiekimą grandinės pertraukikliu.

5. Operacija

5.1 Aiming the Light

The TK-103LED track head allows for flexible light direction. You can rotate the fixture 350 degrees horizontally and tilt it 90 degrees vertically to illuminate your desired area. Loosen the aiming screws slightly, adjust the fixture, and then re-tighten the screws to secure its position.

5.2 Pritemdymas

This fixture is designed for smooth and continuous dimming from 100% down to 1% when used with an electronic low voltage (ELV) dimmer. For optimal performance and to avoid flickering, ensure your dimmer switch is compatible with LED lighting and specifically with ELV dimming protocols.

6. Priežiūra

6.1 Valymas

Norėdami valyti įrenginį, įsitikinkite, kad maitinimas išjungtas. Nuvalykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių, nes jie gali pažeisti apdailą ar elektrinius komponentus.

6.2 Re-Lamping (Bulb Replacement)

The TK-103LED track head uses a GU10 LED bulb. While the included LED bulb has a long lifespan, it can be replaced if necessary. The fixture is designed for easy re-lamping from the front without the use of tools. To replace the bulb:

1. Išjunkite įrenginio maitinimą grandinės pertraukikliu.
2. Carefully grasp the decorative glass shade or the bulb itself and twist counter-clockwise to remove the GU10 bulb.
3. Insert a new GU10 LED bulb by aligning the pins with the socket holes and twisting clockwise until secure.
4. Atkurkite armatūros maitinimą.

7. Problemų sprendimas

8. Specifikacijos

• Prekinis ženklas: WAC apšvietimas
• Modelio numeris: LTK-103LED-BK
• Spalva: Juoda
• Medžiaga: Aluminum (fixture), Glass (shade)
• Stilius: L Track (compatible with H, J/J2 track types)
• Specifiniai naudojimo būdai: Naudoti tik patalpose
• Maitinimo šaltinis: AC
• Šviesos šaltinis: LED
• Šviesos šaltinių skaičius: 1
• ttage: 120 voltų
• Vattage: 8 vatų
• Lemputės pagrindas: GU10
• Jungiklio tipas: Dimmer compatible (ELV LED)
• Ryškumas: 470 liumenų
• Montavimo tipas: Montavimas ant lubų
• Prekės matmenys (I x P x A): 2.63" x 3.63" x 5.44" (Note: Height varies with aiming, refer to Figure 1 for detailed dimensions)
• Prekės svoris: 4.32 uncijos
• UPC: 790576225050

9. Garantija ir palaikymas

9.1 Gamintojo garantija

WAC Lighting provides a warranty for this product: 5 years for functional components and 2 years for the finish. Please retain your proof of purchase for warranty claims.

9.2 Pagalba klientams

For technical assistance, replacement parts, or warranty inquiries, please contact WAC Lighting customer support. Refer to the WAC Lighting webDabartinę kontaktinę informaciją rasite svetainėje arba produkto pakuotėje.