Lowell ES-4T

„Lowell ES-4T“ 4 colių dvigubo kūgio lubinio garsiakalbio naudojimo instrukcija

Model: ES-4T

1. Įvadas

The Lowell ES-4T is a 4-inch dual cone in-ceiling speaker designed for commercial audio applications. It delivers clear intelligibility for speech and a full-frequency response for music. Its wide dispersion characteristics can optimize coverage in distributed speaker systems, potentially reducing the total number of speakers required.

2. Pagrindinės savybės

  • Vairuotojas: 4-inch dual cone driver with a high-frequency whizzer cone for extended range.
  • Transformatorius: Integrated 16W transformer with selectable taps for 25V, 70V, or 100V speaker systems. Includes an 8-ohm transformer bypass position. Tap selection is accessible behind the grille.
  • Korpusas: Painted (grey) steel back-can with mounting dogs. The ported enclosure is tuned for enhanced low-frequency response.
  • Grotelės: Press-fit grille with scrim for aesthetic integration and a pull-tool for easy removal.
  • Mounting Aids: Includes support rails, a C-ring, a template, and a paint guard for simplified installation.
  • Jungtys: Features a removable 4-pin Phoenix-style connector with two terminals for speaker input and two parallel terminals for output to the next speaker in a daisy-chain configuration.

3. Sąranka ir diegimas

Proper installation is crucial for optimal performance and safety. Ensure all local electrical codes are followed. It is recommended that installation be performed by a qualified professional.

3.1 Išpakavimas ir patikrinimas

Carefully unpack the speaker and all accessories. Inspect for any signs of damage during shipping. Contact your supplier immediately if any damage is found.

3.2 Mounting Preparation

  1. Pasirinkite vietą: Choose a suitable ceiling location free from obstructions and structural elements.
  2. Iškirpti: Use the provided template to mark the ceiling cutout. Carefully cut the opening.
  3. Install Mounting Aids: Insert the support rails and C-ring through the cutout. Secure them according to the specific installation requirements of your ceiling type. The paint guard can be used to protect the speaker during ceiling painting.
Lowell ES-4T Mounting Aids

3.1 vaizdas: Included mounting aids, including support rails and a C-ring, designed to facilitate secure installation in various ceiling types.

3.3 Laidų jungtys

  1. Access Connections: Remove the grille using the provided pull-tool to access the transformer tap selector and the Phoenix-style connector.
  2. Select Transformer Tap: Based on your audio system's voltage (25V, 70V, or 100V) or if using an 8-ohm bypass, adjust the rotary switch located behind the grille to the desired setting.
  3. Prijunkite laidus: Connect your audio amplifier's output wiring to the input terminals of the removable 4-pin Phoenix-style connector. If daisy-chaining multiple speakers, use the parallel output terminals to connect to the next speaker. Ensure correct polarity.
Lowell ES-4T Speaker without Grille showing Transformer Tap

3.2 vaizdas: View of the Lowell ES-4T speaker with the grille removed, revealing the dual cone driver and the rotary switch for selecting transformer taps (25V, 70V, 100V, or 8-ohm bypass).

Lowell ES-4T Rear View with Phoenix Connector

3.3 vaizdas: Galinis view of the Lowell ES-4T speaker, showing the grey steel back-can, mounting dogs, and the removable Phoenix-style connector for audio input and output.

3.4 Final Placement

Once wiring is complete and verified, carefully insert the speaker into the ceiling cutout. Engage the mounting dogs by tightening the screws, which will secure the speaker firmly to the ceiling. Re-attach the grille by pressing it into place until it sits flush with the ceiling surface.

Lowell ES-4T Speaker with Grille

3.4 vaizdas: Priekyje view of the Lowell ES-4T 4-inch dual cone ceiling speaker with its white press-fit grille installed, ready for use.

4. Naudojimo instrukcijos

The Lowell ES-4T speaker is designed for passive operation, meaning it requires an external amplifier. Once properly installed and connected to an appropriate amplifier, operation is straightforward:

  1. Maitinimas: Įjunkite garsą ampgyvesnis.
  2. Garso šaltinis: Ensure your audio source (e.g., mixer, media player) is active and sending a signal to the ampgyvesnis.
  3. Garsumo valdymas: Garsumo lygį reguliuokite naudodami amplifier or audio system's controls. Avoid excessively high volumes that could cause distortion or damage to the speaker.
  4. Transformer Tap Verification: If sound is too low or absent, double-check the transformer tap setting behind the grille to ensure it matches your ampkeltuvo išėjimo ttage (25V, 70V, 100V) or is set to 8-ohm bypass for low impedance systems.

5. Priežiūra

The Lowell ES-4T speaker requires minimal maintenance to ensure long-term performance.

  • Valymas: Periodically wipe the grille and visible surfaces with a soft, dry cloth. For stubborn dirt, a slightly damp Galima naudoti šluostę, tačiau įsitikinkite, kad į garsiakalbio komponentus nepatenka drėgmės. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
  • Ryšio patikrinimas: Occasionally inspect the wiring connections to ensure they remain secure. Loose connections can lead to intermittent sound or reduced audio quality.
  • Aplinkos sąlygos: Ensure the speaker is not exposed to extreme temperatures, high humidity, or direct water contact, as these can damage internal components.

6. Problemų sprendimas

If you encounter issues with your Lowell ES-4T speaker, refer to the following common troubleshooting steps:

ProblemaGalima priežastisSprendimas
Nėra garso iš garsiakalbio
  • Amplifier off or muted
  • Neteisingi laidai
  • Incorrect transformer tap setting
  • Sugedęs garso šaltinis
  • Užtikrinti ampĮjungtas lifier, o garsumas padidintas.
  • Verify all wiring connections are secure and correct polarity is observed.
  • Check transformer tap setting matches ampgyvybingesnė produkcija.
  • Išbandykite su kitu garso šaltiniu.
Iškraipytas arba neaiškus garsas
  • Garsas per didelis
  • Laisvos jungtys
  • Neteisingas impedanso atitikimas
  • Sugadintas garsiakalbio tvarkyklė
  • Sumažinti ampkeltuvo tūris.
  • Patikrinkite visų laidų jungčių sandarumą.
  • Ensure transformer tap setting is appropriate for the amplifier and system.
  • If distortion persists, the speaker may require professional inspection.
Pertraukiamas garsas
  • Atsipalaidavusi laidų jungtis
  • Sugedęs laidas
  • Inspect and secure all wiring connections, especially at the Phoenix connector.
  • Test with new audio cables if possible.

If the problem persists after attempting these solutions, contact Lowell customer support or a qualified audio technician.

7. Specifikacijos

FunkcijaDetalė
Vairuotojas4-inch dual cone, 25W
Transformatorius16W (taps for 25V, 70V, 100V, and 8-ohm bypass)
Bendras gylis6.22 colio (15.8 cm)
Bendras skersmuo8.27 colio (21.0 cm)
SpalvaWhite (grille)
Nominali varža8 ohms (7.3 ohms minimum at 342Hz)
Conical Dispersion Angle175 degrees conical at 2kHz octave (-6dB)
Sensitivity (half space)85.7 dB (SPL at 1W/1M average)
Prekės svoris8 svaro (3.63 kg)
Gaminio matmenys6.22 "D x 8.27" P x 8.27" A
Montavimo tipasMontavimas ant lubų
UPC811859033312
GamintojasLowell gamyba

8. Garantija ir palaikymas

For specific warranty information regarding your Lowell ES-4T speaker, please refer to the documentation included with your purchase or visit the official Lowell Manufacturing websvetainė. Garantijos sąlygos paprastai apima medžiagų ir gamybos defektus per tam tikrą laikotarpį nuo įsigijimo datos.

For technical support, service, or further inquiries, please contact Lowell Manufacturing directly through their official channels. When contacting support, please have your product model number (ES-4T) and purchase details readily available.

Lowell Manufacturing Official Websvetainė: www.lowellmfg.com

© 2023 Lowell Manufacturing. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.