Instruction Manual for Scheppach HS 120o Circular Sawbench

1. Įvadas

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Scheppach HS 120o 12-inch (315mm) Circular Sawbench. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Scheppach HS 120o is designed for sawing beams, boards, and other wood-like materials. It is suitable for ripping, crosscutting, angle, and compound angle cuts in workshop and construction site environments.

2. Saugos instrukcijos

ĮSPĖJIMAS: Nesilaikant šių saugos nurodymų, galima sunkiai susižaloti arba mirti.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and dust mask.
• Ensure the sawbench is stable and securely placed on a level surface before operation.
• Keep hands and fingers clear of the saw blade at all times. Use push sticks or push blocks when cutting small pieces.
• Disconnect the power supply before performing any adjustments, maintenance, or when changing the saw blade.
• Do not operate the sawbench in damp arba drėgnomis sąlygomis.
• Laikykite darbo vietą švarią ir gerai apšviestą. Netvarkingos vietos sukelia nelaimingus atsitikimus.
• Never force the workpiece into the blade. Allow the blade to cut at its own pace.
• Prieš kiekvieną naudojimą įsitikinkite, kad apsauginis peiliukas yra savo vietoje ir veikia tinkamai.
• Only use saw blades recommended by the manufacturer and suitable for the material being cut.
• Do not wear loose clothing, gloves, ties, or jewelry that could get caught in moving parts.

3. Komponentai baigtiview

Familiarize yourself with the main components of your Scheppach HS 120o Circular Sawbench:

• Pjūklo geležtė: The cutting tool, 315 mm diameter.
• Stalviršis: The main work surface, with an extension table for larger materials.
• Rip/Mitre Fence: Adjustable guide for straight and angled cuts.
• Ašmenų apsauga: Apsaugo naudotoją nuo besisukančio peilio.
• Height Adjustment Handwheel: For setting the cutting height.
• Kampo reguliavimas: For setting the blade angle (90° to 45°).
• Variklis: 230V/50Hz/2.2 kW motor, providing 2800 RPM.
• Siurbimo žarna: For dust extraction connection.
• Įjungimo / išjungimo jungiklis: Power control for the sawbench.

4. Sąranka ir surinkimas

Before operating the sawbench, ensure it is properly assembled and set up.

1. Išpakavimas: Carefully remove all components from the packaging. Verify that all included components are present: HW-Saw blade diameter 315 mm, driving device, extension table, and suction hose.
2. Rėmo surinkimas: Assemble the sawbench frame according to the diagrams provided in the separate assembly guide. Ensure all bolts and fasteners are securely tightened.
3. Table Extension: Attach the extension table to the main table. This provides flexibility for handling larger workpieces.
4. Ašmenų montavimas: Ensure the sawbench is unplugged. Install the 315mm HW-Saw blade, ensuring it is oriented correctly for cutting. Tighten the blade retaining nut securely.
5. Suction Hose Connection: Connect the provided suction hose to the dust extraction port on the sawbench. For optimal dust collection, connect it to a suitable dust extractor system.
6. Maitinimo jungtis: Connect the sawbench to a 240V, 50Hz power supply. Ensure the electrical circuit can handle the 2.2 kW power requirement.

5. Naudojimo instrukcijos

Follow these steps for safe and effective operation of your sawbench.

1. Patikra prieš eksploataciją: Before each use, inspect the saw blade for damage, ensure all guards are in place, and verify that the power cord is in good condition.
2. Peilio aukščio reguliavimas: Use the height adjustment handwheel to set the blade height. For most cuts, the blade should extend approximately 1/8 inch (3mm) above the workpiece. The maximum cutting height is 83 mm.
3. Adjusting Blade Angle: The blade can be swiveled from 90° (vertical) to 45° for angled cuts. Loosen the angle locking mechanism, adjust to the desired angle, and re-tighten securely.
4. Setting the Fence: Position the rip/mitre fence to the desired distance from the blade for rip cuts, or set it for miter cuts. Ensure the fence is parallel to the blade for rip cuts and securely locked in place.
5. Pjūklo paleidimas: Press the ON switch to start the motor. Allow the blade to reach full speed (2800 RPM) before beginning the cut.
6. Pjūvio atlikimas:
   • Place the workpiece firmly against the fence and the table.
   • Slowly and steadily feed the workpiece into the rotating blade. Do not force the material.
   • Maintain control of the workpiece throughout the cut. Use a push stick for narrow cuts or when your hands are close to the blade.
   • The cutting speed is 46 m/sec.
7. Pjūklo sustabdymas: Press the OFF switch to stop the motor. Wait for the blade to come to a complete stop before removing the workpiece or making any adjustments.

6. Priežiūra

Regular maintenance ensures the longevity and safe operation of your sawbench.

• Valymas: After each use, disconnect the power and clean the sawbench. Remove sawdust and debris from the table, blade guard, and motor housing. Use compressed air for hard-to-reach areas.
• Ašmenų patikrinimas: Reguliariai tikrinkite pjūklo diską, ar jis nėra aštrus, įtrūkęs ar netrūksta dantų. Nedelsdami pakeiskite atšipusius arba pažeistus diskus.
• Tepimas: Periodically apply a light coat of machine oil to moving parts, such as the blade height and angle adjustment mechanisms, to ensure smooth operation.
• Tvirtinimo detalių patikrinimas: Periodically check all nuts, bolts, and screws for tightness. Re-tighten as necessary to prevent vibration and ensure stability.
• Dust Extraction System: Ensure the dust extraction hose and port are clear of obstructions for efficient dust removal.

7. Problemų sprendimas

Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti.

8. Techninės specifikacijos

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the warranty card included with your product or contact Scheppach customer service directly. Keep your purchase receipt as proof of purchase.

For additional assistance, visit the official Scheppach websvetainėje arba susisiekite su vietos įgaliotuoju atstovu.