Manfrotto 190XPRO Carbon Fiber 3-Section Tripod (MT190CXPRO3) Instruction Manual

1. Įvadas

The Manfrotto 190XPRO Carbon Fiber 3-Section Tripod (MT190CXPRO3) is engineered to provide exceptional stability and versatility for photographers and videographers. Constructed with 100% carbon fiber tubes, this tripod offers superior rigidity and vibration absorption while maintaining a lightweight profile. Its innovative design incorporates features for quick setup, precise positioning, and enhanced compatibility with various accessories.

Figure 1: Manfrotto 190XPRO Carbon Fiber 3-Section Tripod (MT190CXPRO3) in its compact, folded state.

2. Sąranka ir surinkimas

2.1 Extending the Legs

The tripod features the Quick Power Lock (QPL) system for rapid leg extension. To extend a leg section, simply open the ergonomic locking lever. The leg will extend smoothly. Close the lever firmly to secure the leg section in place. Repeat for all three leg sections to achieve the desired height.

Figure 2: Detail of the Quick Power Lock (QPL) system for fast and secure leg adjustments.

2.2 Kojų kampų reguliavimas

The new Leg Angle Selectors allow for precise positioning on uneven terrain or for low-angle shots. Press the angle selector button at the top of each leg to release it, then adjust the leg to one of the available angle positions. Ensure the selector clicks back into place to lock the angle.

2.3 Using the 90° Column

For overhead shots or macro photography, the patented 90° column can be quickly deployed. With a 'one-finger' operation, the center column can be pivoted horizontally, allowing the camera to be positioned directly over the subject. Ensure the column is securely locked in both vertical and horizontal positions.

Figure 3: The 90° center column feature, enabling versatile camera positioning.

2.4 Mounting a Camera Head

The tripod features a 3/8-inch mounting stud on its top plate, compatible with most standard camera heads. Securely screw your desired camera head onto this stud. Ensure it is tightened to prevent rotation during use.

3. Naudojimo instrukcijos

3.1 Trikojo išlyginimas

The integrated Rotating Leveling Bubble allows for precise leveling of the tripod, regardless of the head type or setup configuration. Adjust the leg lengths until the bubble is centered within the indicator, ensuring a perfectly level base for your camera.

3.2 Using the Easy Link Plug

The 'Easy link' plug is a threaded connector located on the tripod's upper casting. This feature allows for direct attachment of accessories such as LED lights, reflectors, or articulating arms, transforming your tripod into a portable photographic studio. Ensure accessories are securely fastened.

3.3 Maximum Load Capacity

Always adhere to the maximum load capacity of 15.4 pounds (7 kg) for this tripod. Exceeding this limit can compromise stability and potentially damage the equipment. Refer to the specifications section for detailed weight limits.

Figure 4: Manfrotto's commitment to equipment safety, highlighting the UNI Safety Payload standard.

4. Priežiūra

To ensure the longevity and optimal performance of your Manfrotto 190XPRO tripod, follow these maintenance guidelines:

• Valymas: Wipe down the carbon fiber legs and magnesium castings with a soft, damp cloth after each use, especially if exposed to dust, sand, or saltwater. Avoid abrasive cleaners.
• Tepimas: Periodically check leg locks and moving parts for smooth operation. If necessary, apply a small amount of silicone-based lubricant to the moving mechanisms, avoiding excessive application.
• Saugykla: Store the tripod in a dry, clean environment, preferably in its protective bag, to prevent dust accumulation and potential damage.
• Patikra: Regularly inspect all screws, levers, and joints for tightness and wear. Tighten any loose components and replace worn parts as needed.

5. Problemų sprendimas

This section addresses common issues you might encounter with your tripod:

• Kojos netolygiai išsitiesia / atsitraukia: Check for debris or dirt in the Quick Power Lock (QPL) mechanisms. Clean thoroughly and apply a small amount of lubricant if needed. Ensure levers are fully open or closed.
• Trikojo nestabilumas: Verify that all leg sections are fully extended and all QPL levers are securely locked. Ensure the leg angle selectors are engaged correctly. Check that the camera head is tightly mounted to the 3/8-inch stud.
• Center column sticking: Ensure the locking collar for the center column is fully loosened before attempting to adjust its height or pivot to 90°. Clean any dust or grit from the column mechanism.
• Burbulinis gulsčiukas netikslus: Ensure the tripod is on a flat surface. If the bubble level consistently shows an inaccurate reading, it may require recalibration or replacement by a qualified service center.

6. Specifikacijos

7. Garantija ir palaikymas

Manfrotto products are designed and manufactured to high-quality standards. For detailed warranty information, product registration, and customer support, please visit the official Manfrotto websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.