KOAMTAC KDC350Li-MO-3K-R2 „Bluetooth“ brūkšninių kodų skaitytuvo naudotojo vadovas

1. Įvadas

This manual provides essential information for the safe and efficient operation of your KOAMTAC KDC350Li-MO-3K-R2 Bluetooth Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance.

2. Pakuotės turinys

Patikrinkite, ar jūsų prekės pakuotėje yra visi šie daiktai:

• KDC350Li-MO-3K-R2 Barcode Scanner
• Ištraukiamas dirželis
• USB įkrovimo/ryšio kabelis
• Product CD (containing drivers and software)

3. Įrenginys baigtasview

Familiarize yourself with the components of your KDC350Li-MO-3K-R2 scanner.

1 vaizdas: Priekyje view of the KDC350Li-MO-3K-R2 scanner. The device features an OLED display at the top, showing 'KoamTac Data Collector KDC350_3key'. Below the screen are two green indicator lights. In the middle section, a prominent circular 'SCAN' button is flanked by two navigation keys on each side (left and right arrows). The KOAMTAC logo is visible at the bottom.

Pagrindiniai komponentai:

• OLED ekranas: Shows device status, scanned data, and menu options.
• SCAN mygtukas: Activates the barcode scanning laser.
• Naršymo mygtukai: Used to navigate through menus and options on the OLED display.
• Indikacinės lemputės: Provide visual feedback on power, battery, and connection status.

4. Sąranka

4.1. Akumuliatoriaus įkrovimas

Before initial use, fully charge the KDC350Li-MO-3K-R2 scanner.

1. Connect the small end of the USB charge/communication cable to the KDC350's charging port.
2. Prijunkite didesnį USB kabelio galą prie USB maitinimo adapterio (nepridedamas) arba kompiuterio USB prievado.
3. The indicator light will show charging status. A full charge typically takes approximately 3-4 hours.

4.2. Įjungimas/išjungimas

• Norėdami įjungti: Press and hold the SCAN button for approximately 3 seconds until the display illuminates.
• Norėdami išjungti: Navigate to the 'Power Off' option in the device menu using the navigation keys and confirm, or press and hold the SCAN button for approximately 5 seconds.

5. Naudojimo instrukcijos

5.1. Basic Barcode Scanning

Norėdami nuskaityti brūkšninį kodą:

1. Point the scanner's laser aperture at the barcode.
2. Press and hold the SCAN button. A red laser line will appear.
3. Sulygiuokite lazerio liniją per visą brūkšninį kodą.
4. Upon successful scan, the scanner will emit a beep, and the scanned data will appear on the OLED display.
5. Atleiskite mygtuką SCAN.

5.2. Using the OLED Display and Navigation

The OLED display provides real-time information and access to device settings. Use the left and right navigation keys to scroll through menu options and select items.

6. Bluetooth ryšys

The KDC350Li-MO-3K-R2 supports Bluetooth connectivity for wireless data transfer to host devices such as smartphones, laptops, and desktops.

6.1. Pairing Modes

The scanner supports various Bluetooth profiles:

• HID (žmogaus sąsajos įrenginys): Functions as a keyboard, sending scanned data directly to any application with a cursor. No special software is required on the host device.
• SPP (Serial Port Profile): Requires a KTSync application or custom software on the host device to receive data. Offers more control over data handling.
• MFi (Made For iPhone/iPad): Specific profile for iOS devices, often referred to as iOS Bluetooth.

6.2. Pairing with a Host Device

1. Įsitikinkite, kad KDC350 yra įjungtas.
2. On the KDC350, navigate to the 'Bluetooth' menu and select the desired pairing mode (e.g., HID, SPP, iOS).
3. The scanner will enter pairing mode and become discoverable.
4. Pagrindiniame įrenginyje (išmaniajame telefone, planšetiniame kompiuteryje, kompiuteryje) įjunkite „Bluetooth“ ir ieškokite galimų įrenginių.
5. Select 'KDC350' from the list of discovered devices.
6. Follow any on-screen prompts to complete the pairing process. A successful connection will be indicated on the KDC350's display and by an indicator light.

7. Priežiūra

7.1. Prietaiso valymas

Norėdami išlaikyti optimalų našumą, skaitytuvą laikykite švarų.

• Šiek tiek naudokite minkštą, be pūkelių šluostę dampnuplauti vandeniu arba švelniu valymo tirpalu.
• Nenaudokite abrazyvinių valiklių, tirpiklių ar stiprių cheminių medžiagų.
• Ensure the scanning window is free of dust and smudges for accurate scanning.

7.2. Akumuliatoriaus priežiūra

Norėdami pailginti baterijos veikimo laiką:

• Venkite ekstremalių temperatūrų.
• Reguliariai kraukite akumuliatorių, tačiau venkite palikti jį ilgam visiškai išsikrovusį.
• Jei įrenginį ilgesnį laiką laikysite, prieš saugojimą įkraukite jį maždaug iki 50 %.

8. Problemų sprendimas

If you encounter issues with your KDC350Li-MO-3K-R2, refer to the following common problems and solutions:

• Įrenginys neįsijungia: Įsitikinkite, kad akumuliatorius įkrautas. Prijunkite prie maitinimo šaltinio ir bandykite dar kartą.
• Cannot scan barcodes: Check if the laser is active. Ensure the barcode is not damaged and is within the scanner's range. Clean the scanning window.
• „Bluetooth“ ryšio problemos: Ensure Bluetooth is enabled on both the scanner and the host device. Verify the correct pairing mode is selected. Try unpairing and re-pairing the devices.
• Scanned data not appearing on host device: Confirm successful Bluetooth pairing. If using HID mode, ensure the cursor is in a text field. If using SPP, verify the KTSync application or custom software is running and configured correctly.

For further assistance, consult the KOAMTAC websvetainėje arba susisiekite su klientų aptarnavimo tarnyba.

9. Specifikacijos

10. Garantija ir palaikymas

KOAMTAC products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty card included in your package or visit the official KOAMTAC websvetainę.

For technical support, software downloads, or frequently asked questions, please visit the KOAMTAC support portal or contact their customer service directly. Contact details can typically be found on the manufacturer's websvetainę.