HOTONE TANLA1

Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Galvos vartotojo vadovas

Model: TANLA1 | Brand: HOTONE

1. Įvadas

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Pagrindinės funkcijos:

  • Ultra-compact, portable ampkeltuvo galva.
  • Inspired by the legendary Vox AC30 amppagyvinančio tono.
  • Separate Volume and Gain control knobs.
  • 3-band EQ (Bass, Middle, Treble) for tone shaping.
  • Integrated FX Loop for external effects integration.

2. Saugos instrukcijos

  • Maitinimas: Use only the specified 18V DC power adapter (center negative). Incorrect voltage gali sugadinti įrenginį.
  • Vėdinimas: Užtikrinkite tinkamą vėdinimą. Neužblokuokite ventiliacijos angų.
  • Drėgmė: Laikykite įrenginį atokiau nuo vandens ar per didelės drėgmės.
  • Šiluma: Venkite įrenginio statyti šalia šilumos šaltinių arba tiesioginiuose saulės spinduliuose.
  • Valymas: Valykite tik sausa šluoste.
  • Aptarnavimas: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.

3. Produktas baigtasview

Hotone Nano Legacy British Invasion Ampkeltuvas Galva

Vaizdas: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Priekinio skydelio valdikliai:

Hotone Nano Legacy British Invasion Front Panel Diagram

Vaizdas: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

  1. INPUT: 1/4" mono jack for connecting your guitar.
  2. BOSAS: Controls the low frequency response of your tone.
  3. VIDURIO: Controls the mid frequency response of your tone.
  4. TREBLE: Controls the high frequency response of your tone.
  5. GAUTIS: Controls the pre-amp gain level, affecting distortion and sustain.
  6. TŪRIS: Valdo bendrą išvesties garsumą ampgyvesnis.
  7. ĮJUNGIMO/IŠJUNGIMO jungiklis: Įjungia arba išjungia įrenginį.

Galinio skydelio jungtys:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Vaizdas: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

  1. 18V DC: Power input for the included 18V DC adapter (center negative).
  2. TELEFONIŲ/LINJOS IŠVESTIS: 1/8" stereo jack for headphones or direct recording.
  3. AUX IN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
  4. FX kilpos grįžimas: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
  5. GARSIAKARIO IŠVESTIS: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
  6. FX LOOP SEND: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Sąranka ir jungtys

  1. Maitinimo jungtis: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
  2. Gitaros prijungimas: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
  3. Garsiakalbio jungtis: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Įspėjimas: Nenaudokite amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
  4. Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
  5. AUX Input (Optional): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
  6. FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Naudojimo instrukcijos

  1. Maitinimas: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
  2. Pradiniai nustatymai: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
  3. Stiprumo reguliavimas: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
  4. Garso reguliavimas: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
  5. Tone Shaping with EQ:
    • BOSAS: Adjust for low-end warmth and fullness.
    • VIDURIO: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
    • TREBLE: Adjust for brightness and clarity.
  6. Išjungti: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Priežiūra

  • Valymas: Naudokite minkštą, sausą šluostę, kad nuvalytumėte prietaiso išorę amplifier. Do not use liquid cleaners, aerosols, or solvents.
  • Saugykla: Laikykite ampLaikyti vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
  • Transportas: Transportuojant, įsitikinkite, kad amplifier yra saugiai supakuotas, kad būtų išvengta fizinės žalos.
  • Kabelio priežiūra: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Nėra garso išvesties
  • Maitinimas neprijungtas arba neįjungtas.
  • Gitaros laidas sugedęs arba ne iki galo įkištas.
  • Speaker cable faulty or not fully inserted.
  • Garsiakalbio varžos neatitikimas.
  • Volume/Gain knobs set to minimum.
  • Headphones connected to PHONES/LINE OUT.
  • Patikrinkite maitinimo jungtį ir įjungimo/išjungimo jungiklį.
  • Ensure guitar cable is secure and functional.
  • Ensure speaker cable is secure and functional.
  • Verify speaker impedance is 4-16Ω.
  • Increase Volume and Gain.
  • Disconnect headphones if using speaker output.
Per didelis ūžesys ar triukšmas
  • Faulty power supply or ground loop.
  • High gain settings.
  • Trikdžiai iš kitų elektroninių prietaisų.
  • Single-coil pickups (inherently more susceptible to hum).
  • Try a different power outlet or a high-quality isolated power supply.
  • Reduce gain settings.
  • Judėti ampatokiau nuo kitų elektronikos prietaisų.
  • Consider using humbucker pickups or a noise gate pedal.
Iškraipytas arba silpnas garsas
  • Sugedę laidai.
  • Neteisingas garsiakalbio prijungimas.
  • Sugedęs garsiakalbis.
  • Įvesties signalas per karštas.
  • Patikrinkite ir, jei reikia, pakeiskite kabelius.
  • Ensure speaker cable is correctly connected and speaker impedance is correct.
  • Test with a different speaker if possible.
  • Reduce output from guitar or preceding pedals.

8. Specifikacijos

Modelis:TANLA1
Išėjimo vattage:5 vatų
Maitinimo šaltinis:Corded Electric (18V DC, center negative)
Suderinami įrenginiai:Gitara
Jungties tipas:1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Prekės svoris:15.5 uncijos (apie 440 gramų)
Gaminio matmenys:2.34 x 5.03 x 2.95 colio (apytiksliai 5.9 x 12.8 x 7.5 cm)
Medžiagos tipas:Nerūdijantis plienas
Spalva:Juoda

9. Informacija apie garantiją

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

10. Pagalba klientams

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone websvetainę.

Visit Hotone Audio Support Page (Pvzampnuoroda, tikroji nuoroda gali skirtis)

© 2024 HOTONE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.