OSRAM Sylvania F40DSGN50-40 Watt T12 5000K Full Spectrum Fluorescent Light Bulb User Manual

Produktas baigtasview

This manual provides instructions for the OSRAM Sylvania F40DSGN50-40 Watt T12 5000K Full Spectrum Fluorescent Light Bulb. This is a 40-watt, 48-inch T12 fluorescent lamp with a Medium Bi-Pin (G13) base, designed to provide 5,000K full spectrum light. It is suitable for various indoor lighting applications.

Image of the Sylvania F40DSGN50-40 Watt T12 5000K Full Spectrum Fluorescent Light Bulb.

Pagrindinės funkcijos:

• Spalvos temperatūra: 5,000K (Cool Daylight White)
• Vidutinis gyvenimo laikas: 20,000 valandos
• Lumens (light output): 2,200
• CRI: 90
• Lemputės tipas: T12 Fluorescent
• Pagrindo tipas: Vidutinio dydžio dvipusis kontaktas (G13)
• Ilgis: 4 Foot (48 inches)

Saugos informacija

Always ensure the power supply to the fixture is turned off before installation, removal, or maintenance. Handle fluorescent bulbs with care to prevent breakage. In case of breakage, follow local guidelines for mercury-containing product cleanup and disposal. Do not use in dimmable fixtures unless specifically rated for dimming applications.

Sąranka ir diegimas

1. Maitinimo atjungimas: Before beginning installation, turn off the power to the light fixture at the circuit breaker or fuse box.
2. Įrenginio paruošimas: If replacing an existing bulb, carefully remove the old bulb from the fixture. Ensure the fixture is clean and free of debris.
3. Lemputės įdėjimas: Align the two pins on each end of the new fluorescent bulb with the sockets in the fixture. Gently push the bulb into the sockets and rotate it approximately 90 degrees until it locks securely into place. Ensure both ends are firmly seated.
4. Maitinimo jungtis: Once the bulb is securely installed, restore power to the light fixture.
5. Testavimas: Įjunkite šviesos jungiklį, kad patikrintumėte tinkamą veikimą.

Pastaba: This bulb is designed for rapid start fluorescent fixtures. Compatibility with other fixture types may vary.

Naudojimo instrukcijos

The OSRAM Sylvania F40DSGN50-40 fluorescent light bulb operates by simply turning on the connected light switch. It provides instant illumination with a 5000K cool daylight white light, suitable for environments requiring bright, full-spectrum lighting such as workshops, garages, or areas for plant growth.

• Pradinis paleidimas: Some fluorescent bulbs may flicker briefly upon initial start-up, especially in colder environments. This is normal and should stabilize quickly.
• Optimalus našumas: Optimaliam našumui ir ilgaamžiškumui venkite dažno įjungimo / išjungimo.

Priežiūra

Regular maintenance ensures optimal light output and extends the life of your fluorescent bulb.

• Valymas: Periodically, with the power off, gently wipe the bulb with a soft, dry, lint-free cloth to remove dust and debris. Do not use liquid cleaners directly on the bulb.
• Pakeitimas: The average rated life of this bulb is 20,000 hours. Replace the bulb when it begins to flicker persistently, dims significantly, or fails to illuminate.
• Šalinimas: Fluorescent bulbs contain small amounts of mercury. Dispose of used bulbs according to local, state, and federal regulations. Many communities offer recycling programs for fluorescent lamps. Neišmeskite į įprastas buitines atliekas.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

For specific warranty information and customer support, please refer to the official OSRAM Sylvania website or contact their customer service directly. Warranty terms and conditions may vary and are typically provided with the product packaging or on the manufacturer's official channels.

Visada išsaugokite pirkimo įrodymą garantiniams reikalavimams.