DIRECTV Wireless Video Bridge (WVB) Instruction Manual

1. Įvadas

The DIRECTV Wireless Video Bridge (WVB) is designed to enable wireless transmission of DIRECTV signals to compatible Genie Clients within your home. This device facilitates the connection of C41W and C61W Genie Minis without the need for direct coaxial cable runs to each client location.

One Wireless Video Bridge can support up to 8 C41W Genie Minis, providing flexibility in your home entertainment setup. A SWM (Single Wire Multiswitch) network and a Genie System are required for the operation of this device.

2. Saugos informacija

• Įsitikinkite, kad prietaisas yra gerai vėdinamoje vietoje, kad išvengtumėte perkaitimo.
• Saugokite prietaisą nuo vandens ar per didelės drėgmės.
• Naudokite tik pateiktą maitinimo adapterį.
• Saugokite prietaisą nuo šilumos šaltinių ir tiesioginių saulės spindulių.
• Nebandykite patys atidaryti ar taisyti įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems specialistams.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• DIRECTV Wireless Video Bridge (WVB) unit
• Nuimamas stovas
• Maitinimo adapteris

Image: Contents of the DIRECTV Wireless Video Bridge package, showing the main unit, its detachable stand, and the power adapter.

4. Produktas baigtasview

The Wireless Video Bridge features several ports and indicators for connectivity and status monitoring.

Vaizdas: Šoninė view of the DIRECTV Wireless Video Bridge, highlighting its various ports and LED indicators.

Pagrindiniai komponentai:

• Maitinimo šviesos diodas: Nurodo įrenginio maitinimo būseną.
• Ethernet prievadas: For wired network connection (optional).
• Coaxial Input (SWM): Connects to your DIRECTV SWM network.
• Maitinimo įvestis: Jungiamas prie pridedamo maitinimo adapterio.
• Wireless Status LED: Indicates the status of the wireless connection to Genie Minis.

5. Sąrankos instrukcijos

Follow these steps to install and configure your DIRECTV Wireless Video Bridge:

1. Vieta: Position the Wireless Video Bridge in a central location within your home, ideally within range of all C41W/C61W Genie Minis you intend to connect. Ensure it is at least 4 feet away from your main Genie DVR to avoid potential interference.
2. Connect to SWM Network: Connect a coaxial cable from your SWM splitter or SWM network to the Coaxial Input port on the Wireless Video Bridge. Ensure your SWM network is properly powered, typically by a separate SWM power inserter. Failure to power the SWM network can result in a "775 Error - Problem Communicating with the Dish."
3. Maitinimas: Connect the provided power adapter to the Power Input port on the Wireless Video Bridge, then plug the adapter into an electrical outlet. The Power LED should illuminate.
4. Pradinis paleidimas: Allow the Wireless Video Bridge several minutes to boot up and establish a connection to your main Genie DVR. The Wireless Status LED may flash during this process.
5. Pairing with Genie Minis:
   • On your main Genie DVR, navigate to the menu settings and select "Add Client."
   • The Genie DVR will put the Wireless Video Bridge into beacon mode, indicated by a flashing green/blue light on the WVB.
   • On your C41W/C61W Genie Mini, follow the on-screen prompts to connect to the Wireless Video Bridge. The network link on the Genie Mini should light up once connected.
6. Aktyvinimas: After physical installation and pairing, you may need to contact DIRECTV customer service to activate the new equipment on your account. Be prepared to provide the serial numbers and model numbers of both your Wireless Video Bridge and Genie Minis.

6. Naudojimo instrukcijos

Once properly installed and activated, the DIRECTV Wireless Video Bridge operates automatically. It continuously provides a wireless signal for your compatible Genie Minis to receive DIRECTV programming.

• Ensure the Wireless Video Bridge remains powered on for continuous service to your wireless Genie Minis.
• The Wireless Status LED should be solid green or blue, indicating an active wireless connection.

7. Priežiūra

The DIRECTV Wireless Video Bridge requires minimal maintenance:

• Valymas: Švelniai nuvalykite įrenginį minkštu, sausu skudurėliu. Nenaudokite skystų valiklių ar abrazyvinių medžiagų.
• Vėdinimas: Įsitikinkite, kad ventiliacijos angos nėra užblokuotos, kad išvengtumėte perkaitimo.
• Firmware atnaujinimai: Firmware updates are typically handled automatically by the DIRECTV system.

8. Problemų sprendimas

If you encounter issues with your Wireless Video Bridge, refer to the following common solutions:

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information and technical support, please refer to the official DIRECTV website or contact DIRECTV customer service directly. Keep your purchase receipt and product serial number handy for any inquiries.

DIRECTV Customer Service: https://www.directv.com/support