KYORITSU Digital Light Meter Model 5202

1. Įvadas

Ačiū, kad pirkoteasing the KYORITSU Digital Light Meter Model 5202. This device is designed for accurate measurement of illuminance in various environments. It features a separated light receiving sensor for optimal positioning, multiple measurement ranges, and a clear digital display. Please read this manual thoroughly before use to ensure safe and correct operation.

2. Saugos informacija

• Do not attempt to open or modify the device, except for battery replacement as described in this manual.
• Keep the device away from water, high humidity, and extreme temperatures.
• Saugokitės, kad prietaisas nenukristų ir nepatirtų stipraus smūgio.
• Use only the specified battery type (9V alkaline battery).
• Išmeskite baterijas laikydamiesi vietinių taisyklių.
• Ensure the sensor is clean and free from obstructions for accurate readings.

3. Produktas baigtasview

The KYORITSU Digital Light Meter 5202 is a compact and versatile instrument for measuring light levels. Its key features include:

• 3-Range Switching: Measures illuminance from low to high levels (200/2000/20000 lux).
• Platus matavimo diapazonas: 0.1 to 19990 Lux.
• Duomenų sulaikymo funkcija: Įšaldo dabartinį matavimą ekrane.
• Separated Sensor: The light receiving sensor is separate from the main unit, allowing for flexible and optimal positioning during measurement, preventing interference from the user's shadow.
• Poslinkio reguliavimas: Allows for fine-tuning of readings.
• Didelis LCD ekranas: Provides clear and easy-to-read digital measurements.

1 pav.: priekis view of the KYORITSU Digital Light Meter 5202 with dimensions.

2 pav.: galinis view of the KYORITSU Digital Light Meter 5202 with kickstand.

4. Sąranka

4.1 Akumuliatoriaus įdėjimas

The device requires one 9V alkaline battery (included). To install or replace the battery:

1. Įsitikinkite, kad įrenginys išjungtas.
2. Suraskite akumuliatoriaus skyrių įrenginio gale.
3. Remove the three screws securing the bottom bracket/back cover.
4. Carefully pry open the side seams of the main unit using a small flathead screwdriver. This will reveal the internal circuit board and the battery connection.
5. Prijunkite 9 V bateriją prie akumuliatoriaus spaustuko, stebėdami teisingą poliškumą.
6. Place the battery into its compartment and carefully reassemble the unit, ensuring the side seams align properly before re-inserting the screws.

4.2 Jutiklio prijungimas

The light receiving sensor is permanently attached via a cable. Ensure the cable is not damaged or kinked before use.

5. Naudojimo instrukcijos

5.1 Maitinimo įjungimas/išjungimas

Paspauskite GALIA mygtuką, norėdami įjungti arba išjungti įrenginį.

5.2 Diapazono pasirinkimas

The device offers three measurement ranges: 200, 2000, and 20000 Lux. Select the appropriate range using the ASORTIMENTAS button. Start with a higher range if the light intensity is unknown to avoid over-range readings.

5.3 Matavimo atlikimas

1. Įjunkite įrenginį.
2. Position the light receiving sensor at the point where illuminance is to be measured. Ensure the sensor surface is clean and directly facing the light source.
3. Select the appropriate measurement range.
4. Read the illuminance value displayed on the LCD screen.

5.4 Duomenų sulaikymo funkcija

Paspauskite LAIKYTI mygtuką, kad sustabdytumėte dabartinį rodmenį ekrane. Paspauskite jį dar kartą, kad atleistumėte fiksavimą ir tęstumėte tiesioginį matavimą.

5.5 Offset Adjustment

The device includes an offset adjustment feature. Refer to the detailed instructions in the full product catalog or contact customer support for advanced calibration procedures if precise offset adjustment is required.

6. Priežiūra

6.1 Valymas

Wipe the device and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the sensor surface clean to ensure accurate readings.

6.2 Akumuliatoriaus keitimas

Replace the 9V battery when the low battery indicator appears on the display or if the device fails to power on. Follow the steps outlined in Section 4.1 Battery Installation.

6.3 Saugykla

When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Problemų sprendimas

• Įrenginys neįsijungia: Patikrinkite akumuliatoriaus įdėjimą ir įsitikinkite, kad akumuliatoriaus įkrova pakankama. Jei reikia, pakeiskite.
• Netikslūs rodmenys: Ensure the sensor surface is clean and unobstructed. Verify the correct measurement range is selected. Check for any environmental factors affecting light.
• Display shows 'OL' or 'OVER': The light intensity exceeds the selected range. Switch to a higher measurement range.
• Ekranas tuščias arba mirga: Battery may be low or improperly installed. Replace the battery.

8. Specifikacijos

9. Garantija ir palaikymas

This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or service, please contact your local KYORITSU distributor or refer to the official KYORITSU webKontaktinę informaciją rasite svetainėje. Prašome išsaugoti pirkimo įrodymą garantijos tikslais.