Hager EK570 Battery-Powered Thermostat User Manual

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Hager EK570 battery-powered weekly thermostat. Please read this guide thoroughly before use to ensure proper function, safety, and to maximize the benefits of its programmable features. Keep this manual for future reference.

2. Saugos informacija

• Always disconnect power to the heating system before attempting any installation or maintenance.
• Montavimą turėtų atlikti tik kvalifikuotas elektrikas arba kompetentingas asmuo.
• Do not expose the thermostat to extreme temperatures, direct sunlight, high humidity, or water.
• Use only LR6 (AA) batteries as specified. Do not mix old and new batteries or different types of batteries.
• Prietaisą laikykite vaikams nepasiekiamoje vietoje.
• Do not attempt to open or repair the thermostat yourself. Refer to qualified service personnel.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• Hager EK570 Thermostat Unit
• 2 x LR6 (AA) Batteries
• Tvirtinimo varžtai ir sieniniai kaiščiai (jei taikoma)
• Šis vartotojo vadovas

4. Produktas baigtasview

Familiarize yourself with the components of your Hager EK570 thermostat:

1 pav.: priekis view of the Hager EK570 thermostat. The device features a clear LCD display at the top, two square buttons below the display, and a central control cluster at the bottom with '-', 'OK', and '+' buttons.

• LCD ekranas: Shows current temperature, time, day, operating mode, and program status.
• Valdymo mygtukai: Used for navigating menus, adjusting settings, and selecting modes. Typically includes 'Mode', 'Set', 'Up', 'Down', and 'OK' buttons.
• Baterijų skyrius: Įsikūręs įrenginio gale.

5. Sąranka

5.1. Akumuliatoriaus įdėjimas

1. Remove the back cover of the thermostat.
2. Insert the 2 x LR6 (AA) batteries, ensuring correct polarity (+/-).
3. Replace the back cover. The display should now activate.

5.2. Termostato montavimas

The Hager EK570 is designed for surface mounting.

1. Pasirinkite tinkamą vietą ant vidinės sienos, atokiau nuo tiesioginių saulės spindulių, skersvėjų ir šilumos šaltinių (pvz., radiatorių, ...).amps). The recommended height is approximately 1.5 meters from the floor.
2. Carefully detach the front part of the thermostat from its base plate.
3. Pažymėkite gręžimo taškus ant sienos, naudodami pagrindinę plokštę kaip šabloną.
4. Išgręžkite skyles ir įkiškite sieninius kaiščius.
5. Pritvirtinkite pagrindinę plokštę prie sienos naudodami pateiktus varžtus.
6. Connect the heating system wires to the terminals on the base plate according to the wiring diagram provided with your heating system. Ensure all connections are secure and correct.
7. Reattach the front part of the thermostat to the base plate, ensuring it clicks securely into place.

5.3. Initial Settings (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day.

1. Press the 'SET' or 'MODE' button to enter the settings menu.
2. Use the '+' or '-' buttons to navigate to 'Time' or 'Date' settings.
3. Press 'OK' to confirm and then use '+' or '-' to adjust the values (hour, minute, day, month, year).
4. Press 'OK' to save each setting and exit the menu.

6. Naudojimo instrukcijos

The Hager EK570 offers various operating modes and programming options to optimize your heating.

6.1. Veikimo režimų pasirinkimas

The thermostat supports the following modes:

• Komforto režimas: Maintains a comfortable temperature (e.g., 21°C) during occupied periods.
• Sumažintas režimas: Maintains a lower, energy-saving temperature (e.g., 18°C) during unoccupied periods or at night.
• Apsaugos nuo užšalimo režimas: Maintains a minimum temperature (e.g., 5°C) to prevent pipes from freezing.
• Rankinis režimas: Allows you to set a constant temperature that overrides any programmed schedule.
• Atostogų režimas: Maintains a specific temperature for an extended period (e.g., during vacation).

To switch between modes, press the 'MODE' button repeatedly until the desired mode is displayed.

6.2. Adjusting Temperature Setpoint

In any operating mode (except Frost Protection), you can temporarily adjust the temperature setpoint:

1. Use the '+' or '-' buttons to increase or decrease the desired temperature.
2. The new setpoint will be active until the next programmed event or until you manually change it again. This is known as a temporary override.

6.3. Savaitinis programavimas

The EK570 is a weekly programmable thermostat, allowing you to set up to 48 program steps per day across 4 setpoints (Comfort, Reduced, etc.). It comes with 3 pre-recorded programs and 1 free program for customization.

1. Press the 'PROG' or 'SET' button to enter programming mode.
2. Use '+' or '-' to select the day of the week you wish to program (e.g., Monday, Tuesday, etc.).
3. Press 'OK' to confirm the day.
4. The display will show the first program period. Use '+' or '-' to set the start time and then 'OK'.
5. Next, select the desired operating mode (Comfort, Reduced, etc.) for this period using '+' or '-' and confirm with 'OK'.
6. Repeat steps 4 and 5 for all desired program periods for that day.
7. You can copy programs from one day to another if needed (refer to specific instructions in the full manual for this feature).
8. Exit programming mode by pressing 'PROG' or 'MODE' button.

7. Priežiūra

7.1. Valymas

Išvalykite termostatą Casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic and electronic components.

7.2. Baterijos keitimas

The thermostat is powered by 2 x LR6 (AA) batteries. When the battery symbol appears on the display, or if the display becomes dim, it is time to replace the batteries.

1. Remove the back cover of the thermostat.
2. Išimkite senas baterijas.
3. Insert new 2 x LR6 (AA) batteries, observing correct polarity.
4. Uždėkite galinį dangtelį.

The thermostat has a power reserve of approximately 10 minutes, allowing for battery replacement without losing programmed settings, provided the replacement is done promptly.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

For detailed warranty information, technical support, or service inquiries, please refer to the official Hager websvetainėje arba susisiekite su įgaliotuoju pardavėju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.