WAC Lighting QP-LED903-DB 900 Series LED Socket Set Instruction Manual

1. Įvadas ir produkto apžvalgaview

This manual provides essential instructions for the safe and efficient use of the WAC Lighting QP-LED903-DB 900 Series LED Socket Set. This LED socket set is designed for indoor use and features energy-efficient LED technology.

Key features include a collar with a threaded set screw for adjusting lamp positions within a shade, smooth and continuous ELV dimming capabilities, and a long rated life. The system operates at 12 Volts and provides 450 lumens with a color temperature of 3000 Kelvin and a CRI of 82.

1 pav. Baigtaview of the WAC Lighting QP-LED903-DB LED Socket Set.

2. Saugos informacija

ĮSPĖJIMAS: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Always check local laws and regulations before installation and use.

• Always disconnect power at the circuit breaker before installation, removal, or servicing.
• Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis visų galiojančių elektros kodeksų.
• Do not rest glass components directly on the socket base.
• Ensure the product is used only in dry, indoor locations.
• Do not modify the product in any way; unauthorized modifications may void the warranty and create safety hazards.
• Šis produktas yra UL sąraše, o tai rodo atitiktį saugos standartams.

3. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• WAC Lighting QP-LED903-DB 900 Series LED Socket Set (1 unit)
• Naudojimo instrukcija (1 vnt.)
• Collar with threaded set screw

Pastaba: The package dimensions are approximately 5.62 inches (length) x 4.255 inches (width) x 2.765 inches (height).

4. Sąranka ir diegimas

This LED socket set is designed for protruding mounting and requires a 12 Volt corded electric power source with a US-style plug format (Type A).

1. Maitinimo atjungimas: Before starting, ensure the power supply to the installation area is completely disconnected at the main circuit breaker.
2. Montavimas: Securely mount the socket set using appropriate hardware for a protruding installation. Ensure the mounting surface is stable and can support the fixture's weight.
3. Laidai: Connect the 12 Volt corded electric power source to the socket set. Follow all local electrical codes and the wiring diagrams provided with your specific fixture (if applicable).
4. Lamp Padėties reguliavimas: The included collar with a threaded set screw allows for varying lamp positions inside the shade. Adjust the collar to achieve the desired lamp depth and secure it by tightening the set screw.
5. Glass Placement: If your fixture includes glass components, ensure they are installed correctly and do not rest directly on the socket base.
6. Maitinimo prijungimas iš naujo: Kai įrengimas baigtas ir visos jungtys pritvirtintos, atkurkite elektros tiekimą automatiniu jungikliu.

Figure 2: Detail of the LED socket set, showing the collar for lamp position adjustment.

5. Naudojimo instrukcijos

The WAC Lighting QP-LED903-DB LED Socket Set is designed for straightforward operation.

• Maitinimo įjungimas/išjungimas: Control the light using the wall switch connected to the fixture.
• Pritemdymas: This socket set supports smooth and continuous ELV (Electronic Low Voltage) dimming. Use a compatible ELV dimmer switch for dimming functionality.
• Energijos efektyvumas: The integrated LED technology ensures energy-efficient operation with no projected UV or IR radiation.

6. Priežiūra

The WAC Lighting QP-LED903-DB LED Socket Set is designed for long-term, low-maintenance operation.

• Valymas: To clean the socket set, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or any cleaning agents that could damage the finish or electrical components.
• LED tarnavimo laikas: The integrated LED has a rated life of 50,000 hours (estimated life of 30,000 hours), meaning no bulb replacement is typically required for the life of the product under normal operating conditions.
• Patikra: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, disconnect power immediately and consult a qualified electrician.

7. Problemų sprendimas

If you encounter issues with your LED socket set, refer to the following common troubleshooting steps:

• Šviesa neįsijungia:
  • Patikrinkite grandinės pertraukiklį, kad įsitikintumėte, jog į įrenginį tiekiama elektra.
  • Patikrinkite, ar sieninis jungiklis yra „ĮJUNGTA“ padėtyje.
  • Įsitikinkite, kad visos laidų jungtys yra saugios.
• Pritemdymo problemos:
  • Confirm that a compatible ELV dimmer switch is being used.
  • Check the dimmer switch wiring.
• Mirganti šviesa:
  • Įsitikinkite, kad visos jungtys yra tvirtos.
  • Verify the power supply is stable.
  • If using a dimmer, ensure it is compatible and properly installed.

Jei po šių veiksmų problemos išlieka, susisiekite su klientų aptarnavimo tarnyba.

8. Specifikacijos

9. Informacija apie garantiją

The WAC Lighting QP-LED903-DB 900 Series LED Socket Set comes with a 5 metų garantija nuo įsigijimo datos. Ši garantija taikoma medžiagų ir gamybos defektams įprasto naudojimo sąlygomis. Išsaugokite pirkimo įrodymą, jei norėtumėte pateikti pretenzijas dėl garantijos.

For detailed warranty terms and conditions, please refer to the official WAC Lighting warranty policy or contact customer support.

10. Pagalba klientams

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact WAC Lighting customer support.

Gamintojas: WAC apšvietimas

Please visit the official WAC Lighting websvetainėje, kurioje rasite kontaktinę informaciją ir papildomus išteklius.