FENGDA AS-189 Airbrush Compressor Instruction Manual

1. Įvadas

This manual provides essential information for the safe and efficient operation of your FENGDA AS-189 Airbrush Compressor. The AS-189 is a single-cylinder, oil-free reciprocating compressor designed for airbrushing applications. It features a 3.0-liter air tank, automatic start/stop functionality, and a maximum air pressure of 6 bar. Please read these instructions thoroughly before initial use and retain them for future reference.

2. Saugos instrukcijos

Always observe the following safety precautions to prevent injury or damage to the compressor:

• Užtikrinkite maitinimo šaltinio ttage matches the compressor's requirements (220-240 V/50 Hz).
• Nenaudokite kompresoriaus šlapioje arba damp sąlygas.
• Laikykite vaikus ir neįgaliotus asmenis atokiai nuo veikiančio kompresoriaus.
• Always disconnect the power plug before performing any maintenance or when the compressor is not in use.
• Do not modify the compressor or its components. Use only original replacement parts.
• Darbo metu pasirūpinkite tinkama ventiliacija, kad išvengtumėte perkaitimo.
• Niekada nenukreipkite oro srovės į žmones ar gyvūnus.
• Wear appropriate personal protective equipment, such as eye protection, when operating.

3. Pakuotės turinys

Išpakuodami patikrinkite, ar visos prekės yra ir nepažeistos:

• 1x FENGDA AS-189 Airbrush Compressor
• 1x anglų kalbos naudojimo instrukcija
• 1x Air Filter (pre-installed or separate)

4. Produktas baigtasview

Familiarize yourself with the main components of your AS-189 compressor.

4.1 paveikslas: Priekinė pusė view of the FENGDA AS-189 Airbrush Compressor. This image shows the overall compact design, including the motor housing, air tank, pressure regulator, and manometer.

4.2 paveikslas: Šoninė view of the FENGDA AS-189 Airbrush Compressor, highlighting the pressure regulator with integrated air filter and moisture trap. The manometer for monitoring air pressure is also visible.

4.3 paveikslas: Kampuotas view of the FENGDA AS-189 Airbrush Compressor, providing a clearer perspective of the handle for portability and the various connections. The power switch is located on the side of the motor housing.

5. Sąranka

1. Vieta: Place the compressor on a stable, level surface in a well-ventilated area.
2. Aerografo jungtis: Connect your airbrush hose to the 1/8" thread compressor connection on the pressure regulator. Ensure a secure, airtight connection.
3. Maitinimo jungtis: Plug the power cord into a grounded electrical outlet (220-240 V/50 Hz). The network cable length is approximately 1.8 meters (6 feet).

6. Naudojimo instrukcijos

The AS-189 compressor features a two-position power switch for different operating modes:

• Switch Position 1 (Auto Start/Stop):

  In this mode, the compressor will automatically start when the air tank pressure drops to 3 bar (43 PSI) and automatically stop when the pressure reaches 4 bar (57 PSI). This mode is ideal for maintaining consistent pressure and reducing noise and wear during intermittent use.
• Switch Position 2 (Maximum Pressure):

  In this mode, the compressor will run continuously until it reaches its maximum pressure of 6 bar (86 PSI). It will then maintain this pressure. This mode is suitable for applications requiring continuous high pressure.

Oro slėgio reguliavimas: Use the pressure regulator knob to adjust the output air pressure to your desired level (0.0 to 6.0 bar). The manometer will display the current output pressure.

7. Priežiūra

The FENGDA AS-189 is an oil-free compressor, eliminating the need for oil changes. Regular maintenance is minimal but important for longevity:

• Oro filtras: Periodically check and clean or replace the air filter element to ensure optimal air quality and compressor performance. A clogged filter can reduce airflow and strain the motor.
• Drėgmės gaudyklė: The integrated moisture trap should be drained regularly, especially in humid environments, to prevent water from entering your airbrush.
• Valymas: Nuvalykite kompresoriaus išorę reklaminiu valikliuamp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Saugykla: When not in use for extended periods, store the compressor in a clean, dry place.

8. Problemų sprendimas

If you encounter issues with your compressor, refer to the following common solutions:

• Kompresorius neįsijungia:
  • Patikrinkite, ar maitinimo laidas tvirtai prijungtas.
  • Verify the power switch is in position 1 or 2.
  • Ensure the electrical outlet is functional.
• Low air pressure or no airflow:
  • Check for leaks in the airbrush hose or connections.
  • Ensure the pressure regulator is set to the desired pressure.
  • Clean or replace the air filter if it is clogged.
  • Check if the airbrush nozzle is clogged.
• Compressor runs continuously in Auto Start/Stop mode:
  • Check for air leaks in the system (hose, airbrush, connections).
  • Ensure the pressure switch is functioning correctly.
• Per didelis triukšmas arba vibracija:
  • Įsitikinkite, kad kompresorius stovi ant stabilaus, lygaus paviršiaus.
  • Patikrinkite, ar nėra atsilaisvinusių komponentų.

Jei problemos išlieka, kreipkitės į klientų aptarnavimo tarnybą arba kvalifikuotą specialistą.

9. Specifikacijos

10. Garantija ir palaikymas

Dėl garantijos informacijos ar techninės pagalbos žr. pirkimo metu pateiktus dokumentus arba susisiekite su pardavėju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.