1. Saugos informacija
This Kidde Pi9010 Dual Sensor Smoke Alarm is designed to provide early warning of fire. For optimal protection, it combines both ionization and photoelectric sensing technologies to detect both fast-flaming and slow-smoldering fires.
- Svarbu: Prieš montuodami ir naudodami perskaitykite visas instrukcijas.
- Vieta: Install smoke alarms on every floor of your home, inside each bedroom, and outside sleeping areas.
- Testavimas: Kas savaitę patikrinkite signalizaciją, kad įsitikintumėte, jog ji tinkamai veikia.
- Į UL sąrašą įtraukta: This dual-sensor smoke alarm is UL listed, ensuring compliance with safety standards.
2. Produktas baigtasview
The Kidde Pi9010 is a battery-operated smoke alarm featuring dual sensing technology for comprehensive fire detection. It includes a Hush feature to temporarily silence nuisance alarms and a test/reset button for easy verification of operation.
Pagrindinės funkcijos:
- Dual Photoelectric and Ionization Sensors
- 9-Volt Battery Powered (battery included)
- Hush Feature for Nuisance Alarms
- Bandymo/atkūrimo mygtukas
- Red LED Indicator for operational status
- Įspėjimas apie išsikrovusią bateriją
Kas yra dėžutėje:
- Kidde Pi9010 Dual Sensor Smoke Alarm
- Mounting Bracket
- Montavimo įranga
- 9 voltų baterija
- Vartotojo vadovas
3. Sąranka ir diegimas
3.1 Akumuliatoriaus įdėjimas
The Kidde Pi9010 smoke alarm operates on a standard 9-volt battery, which is included. Ensure the battery is correctly installed before mounting the alarm.
- Atidarykite baterijų skyrių, esantį signalizacijos gale.
- Connect the 9-volt battery to the battery clip, ensuring correct polarity.
- Įdėkite bateriją į skyrių ir sandariai uždarykite dangtelį.
Figure 1: Battery installation in the Kidde Pi9010 smoke alarm.
3.2 Signalizacijos montavimas
Select a suitable location for your smoke alarm, typically on the ceiling or high on a wall, away from corners and obstructions. Use the provided mounting bracket and hardware.
- Attach the mounting bracket to the ceiling or wall using the screws provided.
- Sulygiuokite signalizaciją su tvirtinimo laikikliu ir pasukite pagal laikrodžio rodyklę, kol ji užsifiksuos vietoje.
- Atlikite pradinį bandymą, kaip aprašyta 4.1 skyriuje.
4. Naudojimo instrukcijos
4.1 Signalizacijos testavimas
Test your smoke alarm weekly to ensure it is functioning correctly.
- Press and hold the test/reset button located on the front of the alarm.
- The alarm will sound a loud, pulsating horn. Release the button once the horn sounds.
- Jei žadintuvas neskamba, žr. skyrių „Trikčių šalinimas“.
4.2 Nutildymo funkcija
The Hush feature temporarily silences the alarm for approximately seven minutes during non-emergency situations, such as cooking fumes.
- To activate, press the Hush button when the alarm is sounding due to a nuisance condition.
- The alarm will silence, and the red LED will flash every 30-40 seconds to indicate it is in Hush mode.
- After approximately seven minutes, the alarm will automatically reset. If smoke is still present, the alarm will sound again.
Video 1: Official Kidde video demonstrating the Dual Photoelectric & Ionization Sensor Smoke Detector. This video provides a visual overview apie produkto savybes ir privalumus.
5. Priežiūra
5.1 Akumuliatoriaus keitimas
The alarm will emit a brief chirp every 30 to 40 seconds for at least seven days when the 9-volt battery needs replacement.
- Pasukite žadintuvą prieš laikrodžio rodyklę, kad jį nuimtumėte nuo tvirtinimo laikiklio.
- Open the battery compartment and disconnect the old 9-volt battery.
- Connect a new 9-volt battery, ensuring correct polarity, and close the compartment.
- Reattach the alarm to the mounting bracket and test its operation.
5.2 Signalizacijos valymas
Clean your smoke alarm regularly to prevent dust and debris from interfering with its operation.
- Use a soft brush attachment on your vacuum cleaner to gently remove dust from the alarm's cover and vents.
- Nenaudokite vandens, valiklių ar tirpiklių, nes jie gali pažeisti įrenginį.
6. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Signalizacija suskamba kas 30-40 sekundžių | Senka baterija | Replace the 9-volt battery (see Section 5.1). |
| Nuisance alarms (e.g., from cooking) | Smoke or steam from non-fire sources | Use the Hush feature (see Section 4.2). Ventilate the area. |
| Bandymo metu neskamba aliarmas | Battery not installed or dead; unit malfunction | Check battery installation/replace. If problem persists, replace unit. |
| Alarm sounds continuously without smoke | Dust buildup; unit malfunction | Clean the alarm (see Section 5.2). If problem persists, replace unit. |
7. Specifikacijos
- Prekinis ženklas: Kidde
- Modelio numeris: Pi9010 (Manufacturer Part Number: 21026062-N)
- Maitinimo šaltinis: 9 voltų baterija
- Jutiklio tipas: Ionization and Photoelectric (Dual Sensor)
- Signalizacijos tipas: Girdimas
- Spalva: Baltas
- Matmenys: Approximately 5.75 inches (diameter) x 1.8 inches (depth)
- Darbinė temperatūra: 40 °F (4.4 °C) iki 100 °F (37.8 °C)
- Drėgmės diapazonas: 10-95 % santykinė oro drėgmė, nekondensuojanti
- Sertifikatai: Įtrauktas į UL sąrašą
- UPC: 047871260621
8. Garantija ir palaikymas
The Kidde Pi9010 Dual Sensor Smoke Alarm is backed by a 10 metų ribota garantijaŠi garantija taikoma medžiagų ir gamybos defektams nuo įsigijimo datos.
For complete warranty details, technical support, or assistance with your product, please refer to the full user manual included in the packaging or visit the official Kidde websvetainę.
Contact your local fire department for additional fire preparedness tips and safety information.