„Hach 9531200 Pocket Pro“ žemo diapazono TDS testerio naudotojo vadovas

Įvadas

The Hach Pocket Pro Low Range TDS Tester is designed to provide accurate and reliable measurements of Total Dissolved Solids (TDS) in various water samples. This compact and easy-to-use device features built-in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen, making it ideal for field and laboratory use. This manual provides essential information for the proper setup, operation, and maintenance of your TDS tester.

Kas yra dėžutėje

• Hach Pocket Pro Low Range TDS Tester
• 4 AAA baterijos
• Virvelė
• Kalibravimo tirpalas
• Greitos pradžios vadovas

Pagrindinės savybės

• Confidence in results
• Sutaupykite laiko ir pinigų
• Naudojimo paprastumas

Sąranka

Akumuliatoriaus montavimas

1. Suraskite baterijų skyriaus dangtelį testerio gale.
2. Nuimkite dangtelį.
3. Insert 4 AAA batteries, ensuring correct polarity as indicated inside the compartment.
4. Saugiai uždėkite akumuliatoriaus skyriaus dangtelį.

Pradinis kalibravimas

For optimal accuracy, it is recommended to perform an initial calibration upon first use or after prolonged storage. Use the provided calibration solution for this process. Refer to the quick start guide for detailed calibration steps specific to your model.

Naudojimo instrukcijos

Maitinimo įjungimas/išjungimas

Press the power button (circular arrow icon) to turn the tester on. Press and hold the power button for a few seconds to turn it off.

Atliekant matavimą

1. Ensure the tester is clean and dry before use.
2. Immerse the probe end of the tester into the sample solution, ensuring the sensor is fully submerged.
3. Allow a few moments for the reading to stabilize on the large LCD screen. The display will show the TDS value and temperature.
4. Record the measurement as needed.
5. Rinse the probe with distilled water after each measurement to prevent cross-contamination.

Ekrano supratimas

The LCD screen displays the primary measurement (TDS) and the temperature. The device includes built-in diagnostics to assist with troubleshooting and ensure reliable readings.

Priežiūra

Zondo valymas

Regular cleaning of the probe is crucial for accurate readings. Rinse the probe thoroughly with distilled or deionized water after each use. For stubborn residues, gently wipe the probe with a soft cloth or cotton swab. Avoid abrasive materials that could damage the sensor.

Baterijos keitimas

When the battery indicator appears on the display, replace the 4 AAA batteries as described in the Setup section. Always use fresh batteries for optimal performance.

Sandėliavimas

Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the probe is clean and dry before storage. If storing for extended periods, remove the batteries to prevent leakage.

Trikčių šalinimas

Netikslūs rodmenys

• Ensure the probe is clean and free of debris.
• Perform a calibration using fresh calibration solution.
• Check for air bubbles around the probe during measurement.
• Patikrinkite sample temperature is within the operating range.

No Display/Power Issues

• Patikrinkite, ar baterijos tinkamai įdėtos ir ar jos pakankamai įkrautos. Jei reikia, pakeiskite.
• Įsitikinkite, kad akumuliatoriaus skyriaus dangtelis yra sandariai uždarytas.

Lėtas reagavimo laikas

• Clean the probe thoroughly.
• Allow sufficient time for the reading to stabilize, especially in samples with varying temperatures.

Specifikacijos

Garantija ir palaikymas

Hach products are manufactured to high standards of quality and reliability. For specific warranty information pertaining to your Hach 9531200 Pocket Pro Low Range TDS Tester, please refer to the documentation included with your purchase or visit the official Hach websvetainę.

For further assistance, technical support, or to explore other Hach products, please visit the HACH parduotuvė „Amazon“ platformoje.