1. Įvadas
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hörmann HET/S 2 BiSecur 868 MHz Receiver. Please read these instructions carefully before beginning any procedures and keep them for future reference.
2. Saugos instrukcijos
- Montavimą ir elektros prijungimą turi atlikti tik kvalifikuoti specialistai.
- Prieš atlikdami bet kokius montavimo, techninės priežiūros ar remonto darbus, atjunkite maitinimą.
- Įsitikinkite, kad veikia ttage matches the receiver's specifications (230 - 240 Vac / Vdc).
- Protect the device from moisture and extreme temperatures. The protection class is IP44.
- Do not modify the receiver or its components. Unauthorized modifications can lead to malfunction and void the warranty.
3. Pakuotės turinys
Patikrinkite, ar yra visi komponentai ir ar jie nepažeisti:
- Hörmann HET/S 2 BiSecur 868 MHz Receiver
- Power adapter (if included with specific kit)
- Montavimo įranga (varžtai, inkarai)
- Šis naudojimo vadovas
4. Sąranka
4.1 Imtuvo montavimas
Select a suitable location for mounting the receiver, ensuring it is protected from direct weather exposure and within range of the BiSecur transmitters. The device has an IP44 protection rating, suitable for outdoor use with limited exposure to water splashes.
- Mark the drilling points on the wall or mounting surface using the receiver's mounting tabs as a template.
- Gręžkite skyles ir, jei reikia, įstatykite tinkamus inkarus.
- Secure the receiver firmly using screws.
4.2 Elektros jungtys
ĮSPĖJIMAS: Ensure power is disconnected before making any electrical connections.
The HET/S 2 receiver features two potential-free relays for controlling external devices. Connect the power supply and relay outputs as follows:
- Maitinimas: Connect the 230 - 240 Vac / Vdc power supply to the designated terminals. Observe correct polarity if using DC power.
- Relės išėjimai: Connect the devices to be controlled (e.g., gate operator, lighting) to the two potential-free relay contacts. Each relay can handle a switching capacity of 30Vdc / 2.5A (resistive load) or 250Vac / 500W (resistive load).
Image: The Hörmann HET/S 2 BiSecur receiver (grey box) connected to its power adapter, illustrating the main components for setup.
5. Operacinis
5.1 Pairing with BiSecur Transmitters
The HET/S 2 receiver operates on the BiSecur 868.3 MHz frequency and must be paired with compatible Hörmann BiSecur transmitters.
- Activate the learning mode on the receiver (refer to the specific instructions for your receiver model, usually a button press).
- Within the learning window, press the desired button on your BiSecur hand transmitter.
- The receiver will confirm successful pairing (e.g., via an LED indicator).
- Repeat for the second channel if desired, using a different button on the transmitter or another transmitter.
5.2 Funkcionalumas
Each of the two relays can be configured for different functions:
- Suaktyvinti / išjungti: Toggles the connected device on or off with each press.
- Pulsas: Provides a momentary contact closure, typically used for gate or garage door operators.
Refer to the receiver's internal settings or dip switches (if applicable) for specific configuration options.
6. Priežiūra
The Hörmann HET/S 2 BiSecur receiver is designed for low maintenance. Regular checks can ensure optimal performance.
- Valymas: Periodically wipe the exterior of the receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Patikra: Annually inspect the wiring for any signs of wear, damage, or loose connections. Ensure the mounting is secure.
- Funkcionalumo testas: Regularly test the receiver's operation with your transmitters to ensure reliable communication.
7. Problemų sprendimas
If you experience issues with your receiver, consult the following table:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Receiver does not respond to transmitter. | Imtuvas negauna maitinimo. Transmitter not paired. Senka siųstuvo baterija. Trukdymas. | Patikrinkite maitinimo šaltinį. Atlikite susiejimo procedūrą (5.1 skyrius). Pakeiskite siųstuvo bateriją. Reduce distance or remove obstacles. |
| Connected device does not activate. | Neteisingas laidų sujungimas. Įrenginio gedimas. Receiver relay fault. | Verify all wiring connections. Test the connected device independently. Contact support if receiver is suspected faulty. |
| Trumpas atstumas. | Obstacles (metal, concrete). Trikdžiai iš kitų įrenginių. Receiver or transmitter antenna obstructed. | Relocate receiver or transmitter. Identify and remove interfering devices. Ensure antennas are clear. |
8. Specifikacijos
- Modelis: Hörmann HET/S 2 BiSecur Receiver
- Modelio numeris: 436728
- Dažnis: 868.3 MHz BiSecur
- Funkcija: Activate / Deactivate or Pulse
- Relės: 2 bepotencialios relės
- Veiklos ttage: 230 - 240 Vac / Vdc
- Perjungimo talpa: 30Vdc / 2.5A (resistive load), 250Vac / 500W (resistive load)
- Apsaugos klasė: IP44
- Kanalų skaičius: 2
- Matmenys: 110 × 45 × 40 mm
9. Garantija
Hörmann products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the documentation provided with your product or contact your local Hörmann dealer.
10. Parama
For technical assistance, troubleshooting beyond this manual, or spare parts, please contact your authorized Hörmann dealer or visit the official Hörmann website. When contacting support, please have your product model number (436728) and purchase information readily available.