Galcon 8118 AC-GQ8 8-Station Indoor Controller User Manual

Įvadas

The Galcon 8118 AC-GQ8 is an advanced indoor irrigation and low voltage lighting controller designed for efficient management of your watering and lighting systems. This controller supports up to 8 stations, configurable as 8 irrigation zones or 7 irrigation zones plus 1 low voltage lighting zone. It offers flexible programming options including daily, odd, even, and cyclic schedules, along with a dedicated program for low voltage programas.

Image: The Galcon 8118 AC-GQ8 controller, showing its grey casing, control panel with LCD display, and a protective cover.

Sąranka ir diegimas

This section provides instructions for the proper setup and installation of your Galcon 8118 AC-GQ8 controller.

Valdiklio montavimas

• Select a suitable indoor location away from direct sunlight, extreme temperatures, and moisture.
• Ensure the location allows for easy access to a standard electrical outlet and irrigation valve wiring.
• Use appropriate screws to securely mount the controller to a wall.

Laidų jungtys

• Maitinimo jungtis: Connect the controller to a standard AC power outlet.
• Vožtuvo laidų sujungimas: Connect each irrigation valve's common wire to the controller's common terminal (C). Connect each individual valve's hot wire to its corresponding station terminal (1-8).
• Pagrindinio vožtuvo / siurblio paleidimo relė (pasirinktinai): If using a master valve or pump start relay, connect its common wire to the common terminal and its hot wire to the designated master valve terminal (M).
• Sensor Input (Optional): The controller supports various sensors (rain, temperature, wind, soil). Connect sensor wires to the dedicated sensor terminals as per the sensor's instructions.
• Žemas tomastage Lighting (Optional): Mažam tūriuitage lighting applications, a separate relay is required (not included). Connect the relay to the designated low voltage output terminal (X) and common.

Įsitikinkite, kad visos jungtys yra saugios ir izoliuotos, kad išvengtumėte trumpojo jungimo.

Naudojimo instrukcijos

This section details how to program and operate your Galcon 8118 AC-GQ8 controller for irrigation and low voltage apšvietimas.

Dabartinio laiko ir datos nustatymas

• Rotate the dial to the "SET CLOCK" position.
• Use the arrow buttons to adjust the time and date.
• Press "ENTER" or rotate the dial to save settings.

Programming Irrigation Programs (A, B, C)

The controller offers three independent irrigation programs (A, B, C) with flexible scheduling options.

1. Pasirinkite programą: Rotate the dial to "PROGRAM A", "PROGRAM B", or "PROGRAM C".
2. Nustatyti pradžios laikus: Each program can have up to 4 start times. Rotate the dial to "START TIME" and use arrow buttons to set.
3. Nustatyti stoties veikimo laikus: Rotate the dial to "RUN TIME". Select each station (1-8) and set its irrigation duration from 1 minute to 4 hours.
4. Nustatykite laistymo dienas: Rotate the dial to "WATERING DAYS". Choose from:
   • Kasdien: Select specific days of the week.
   • Nelyginis: Waters on odd-numbered days.
   • Netgi: Waters on even-numbered days.
   • Ciklinis: Waters every 1 to 31 days. Set the cycle length.

Sezoninis koregavimas

Adjust all program run times simultaneously from 10% to 190% of their set duration.

• Rotate the dial to "SEASONAL ADJUST".
• Use arrow buttons to set the desired percentage.

Lietaus uždelsimo funkcija

Temporarily suspend irrigation for up to 240 days.

• Rotate the dial to "RAIN DELAY".
• Use arrow buttons to set the number of delay days.

Žemas tomastage Lighting Program (X)

This program operates independently of irrigation schedules.

• Rotate the dial to "PROGRAM X".
• Set the desired ON/OFF times for the low voltage apšvietimas.

Manual Operation / System Test

To manually run a station or test the system:

• Rotate the dial to "MANUAL".
• Select the desired station and set its run time.
• The controller will activate the selected station immediately.

Priežiūra

Tinkama priežiūra užtikrina jūsų valdiklio ilgaamžiškumą ir optimalų veikimą.

• Valymas: Valdymo pulto išorę nuvalykite minkšta,amp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Maitinimas: Ensure the power supply is stable. In areas prone to power surges, consider using a surge protector.
• Baterijos atsarginė kopija: The controller may use a 9V battery for program retention during power outages. Check and replace the battery annually or as needed.
• Laidų patikrinimas: Periodically inspect all wiring connections for corrosion or damage.

Trikčių šalinimas

This section addresses common issues you might encounter with your Galcon 8118 AC-GQ8 controller.

If issues persist after following these steps, contact Galcon customer support.

Specifikacijos

• Modelio numeris: GAEDS2U0258
• Stočių skaičius: 8 (7 irrigation + 1 low voltage lighting, or 8 irrigation)
• Programos: 3 (A, B, C) for irrigation, 1 (X) for low voltage apšvietimas
• Programos pradžios laikas: Iki 4
• Drėkinimo trukmė: nuo 1 minutės iki 4 valandų
• Cyclic Watering: Every 1 to 31 days
• Sezoninis koregavimas: nuo 10% iki 190%
• Lietaus vėlavimas: Iki 240 dienų
• Jutiklio įvestis: Compatible with rain, temperature, wind, soil sensors
• Maitinimo šaltinis: AC (details not specified, assuming standard household current)
• Baterija: 1 x 9V battery required (for program retention)
• Gaminio matmenys: 6.1 x 19.81 x 25.65 cm
• Prekės svoris: 680.39 g (1.5 svaro)
• Ekrano tipas: LCD arba LED
• Spalva: Pilka
• Gamintojas: Galcon

Garantija ir palaikymas

For information regarding product warranty, technical support, or service, please refer to the official Galcon websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantijos pretenzijoms.

Galcon Contact Information: Prašome apsilankyti www.galcon.co.il norėdami gauti naujausius palaikymo išteklius ir kontaktinę informaciją.