EVGA 220-P2-0850-X1

EVGA SuperNOVA 850 P2 Platinum Power Supply User Manual

Model: 220-P2-0850-X1

Įvadas

The EVGA SuperNOVA 850 P2 is an 80 PLUS Platinum certified power supply designed to deliver stable and efficient power to your computer system. This fully modular unit incorporates high-quality components, including 100% Japanese capacitors, to ensure long-term reliability and performance. The EVGA ECO Mode allows for silent operation during low to medium loads by stopping the fan. This manual provides essential information for the safe and correct installation, operation, and maintenance of your power supply.

EVGA SuperNOVA 850 P2 Platinum Power Supply

Image: The EVGA SuperNOVA 850 P2 Platinum Power Supply, showcasindėl savo elegantiško juodo dizaino ir ventiliatoriaus grotelių.

Savybės

  • 80 PLUS platinos sertifikuotas: Achieves 92% (115VAC) / 94% (220VAC~240VAC) efficiency or higher under typical loads, reducing heat and operating costs.
  • Visiškai modulinis dizainas: Allows for detachable cables, reducing clutter and improving airflow within the PC case.
  • EVGA ECO Mode: Enables the power supply fan to turn off during low to medium loads for completely silent operation.
  • 100 % japoniški kondensatoriai: Ensures long-term reliability and stable power delivery.
  • 140mm Double Ball Bearing Fan: Provides excellent cooling performance and durability.
  • Visapusiška apsauga: Įskaitant OVP (virš tūrio)tage apsauga), UVP (pagal ttage Protection), OCP (Over Current Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection).

Kas yra dėžutėje

Atidarę pakuotę, patikrinkite, ar yra visi šie daiktai:

  • EVGA SuperNOVA 850 P2 Power Supply Unit
  • Modular Cable Set (including ATX, EPS, PCIe, SATA, Peripheral cables)
  • Kintamosios srovės maitinimo laidas
  • Tvirtinimo varžtai
  • Power On Self Tester (POST)
  • Vartotojo vadovas (šis dokumentas)
Modular cable set for EVGA SuperNOVA P2 power supply

Image: A complete set of modular cables for the EVGA SuperNOVA P2 power supply, including main ATX, CPU, PCIe, SATA, and peripheral connectors.

Sąranka ir diegimas

Follow these steps to properly install your EVGA SuperNOVA 850 P2 power supply into your computer system.

  1. Pirmiausia sauga: Įsitikinkite, kad jūsų kompiuteris yra visiškai išjungtas ir atjungtas nuo sieninio lizdo.
  2. Išimkite seną maitinimo šaltinį (jei taikoma): Disconnect all cables from your old power supply and remove it from the PC case.
  3. Prijunkite naują maitinimo šaltinį: Carefully place the EVGA SuperNOVA 850 P2 into the power supply bay of your PC case. Secure it with the provided mounting screws. Ensure the fan is facing the correct direction for optimal airflow (typically facing down if your case has a bottom vent, or up if it's a top-mounted PSU).
  4. Prijunkite būtiniausius kabelius:
    • Prijunkite 24 kontaktų ATX kabelį prie pagrindinės plokštės.
    • Connect the 8-pin (4+4) EPS/CPU cable(s) to your motherboard.
    • Connect the appropriate PCIe (6+2 pin) cables to your graphics card(s).
    • Prijunkite SATA maitinimo laidus prie savo atminties įrenginių (HDD, SSD) ir optinių diskų.
    • Connect peripheral (Molex) cables to any other components requiring them (e.g., case fans, fan controllers).
  5. Kabelių valdymas: Utilize the fully modular design to connect only the necessary cables. Route cables neatly behind the motherboard tray or in designated channels to improve airflow and aesthetics.
  6. Prijunkite kintamosios srovės maitinimą: Plug the AC power cord into the power supply and then into a wall outlet or surge protector.
  7. Maitinimas: Flip the power switch on the back of the PSU to the 'ON' position. Power on your computer.
Modular cable ports on EVGA SuperNOVA 850 P2 power supply

Image: The modular cable connection panel of the EVGA SuperNOVA 850 P2, showing clearly labeled ports for motherboard (MB), CPU, VGA, SATA, and Peripheral connections.

Galinis view of EVGA SuperNOVA 850 P2 power supply with power switch

Image: The rear panel of the EVGA SuperNOVA 850 P2, featuring the AC power inlet and the main power switch.

Naudojimo instrukcijos

The EVGA SuperNOVA 850 P2 is designed for straightforward operation. Key features include:

  • Maitinimo jungiklis: Located on the rear of the unit, this switch controls the main power to the PSU. Ensure it is in the 'ON' position for the system to receive power.
  • EVGA ECO Mode: This feature is controlled by a switch on the modular cable panel. When ECO Mode is 'ON', the power supply fan will remain off during low to medium system loads, providing silent operation. The fan will automatically activate when the load increases to maintain optimal temperatures. When ECO Mode is 'OFF', the fan will operate continuously.

Vaizdo įrašas: pareigūnas viršview of the EVGA SuperNOVA P2 Power Supply series, highlighting its 80 PLUS Platinum certification and key features.

Priežiūra

Tinkama priežiūra užtikrina jūsų maitinimo šaltinio ilgaamžiškumą ir optimalų veikimą.

  • Dulkių šalinimas: Reguliariai valykite dulkes nuo maitinimo šaltinio ventiliatoriaus grotelių ir ventiliacijos angų suslėgtu oru. Prieš valydami įsitikinkite, kad sistema išjungta ir atjungta nuo elektros tinklo.
  • Kabelio apžiūra: Regularly check all modular cables for secure connections and any signs of wear or damage. Replace any damaged cables immediately.
  • Aplinka: Operate the power supply in a well-ventilated area, free from excessive heat, humidity, and dust.
Į viršų view of EVGA SuperNOVA 850 P2 power supply showing fan grille

Vaizdas: Iš viršaus į apačią view of the EVGA SuperNOVA 850 P2, highlighting the fan grille which should be kept clear of dust for efficient cooling.

Trikčių šalinimas

Jei kyla problemų dėl maitinimo šaltinio, vadovaukitės toliau pateiktais įprastais trikčių šalinimo veiksmais.

  • Nėra galios:
    • Įsitikinkite, kad kintamosios srovės maitinimo laidas yra tvirtai prijungtas tiek prie maitinimo bloko, tiek prie sieninio lizdo.
    • Patikrinkite, ar maitinimo jungiklis maitinimo bloko gale yra padėtyje „Įjungta“.
    • Check all modular cable connections to the motherboard and components.
    • Test the power supply using the included Power On Self Tester (POST) to confirm basic functionality.
  • Sistemos nestabilumas / atsitiktiniai išsijungimai:
    • Įsitikinkite, kad maitinimo šaltinis yra tinkamai įvertintas jūsų sistemos komponentams.
    • Check for overheating. Ensure proper case airflow and that the PSU fan is operating (if ECO mode is off or under load).
    • Patikrinkite, ar visos maitinimo jungtys yra tvirtos.
  • Ventiliatoriaus triukšmas:
    • If ECO Mode is 'ON', the fan will be off during low loads. This is normal.
    • If the fan is excessively loud when ECO Mode is 'OFF' or under load, ensure there are no obstructions to the fan blades and that the PSU is clean of dust.

If issues persist after following these steps, please contact EVGA customer support.

Specifikacijos

FunkcijaDetalė
Modelio numeris220-P2-0850-X1
Vattage850W
80 PLUS sertifikatasPlatina
Formos faktoriusATX
ModuliškumasVisiškai modulinė
Fan Size / Bearing140mm Double Ball Bearing
Kondensatoriai100% Japanese
Įvesties tomastage100-240 VAC
Įvesties dažnis50/60 Hz
Matmenys (IxPxH)6.5 x 5.91 x 3.3 colio (165 x 150 x 85 mm)
Svoris7.95 svaro (3.6 kg)
Specification label on EVGA SuperNOVA 850 P2 power supply

Image: The specification label on the EVGA SuperNOVA 850 P2, detailing electrical ratings and certifications.

Garantija ir palaikymas

The EVGA SuperNOVA 850 P2 power supply is backed by an industry-leading 10 metų garantija, ensuring peace of mind and long-term reliability.

For technical support, warranty claims, or additional information, please visit the official EVGA websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo įrodymą, kad galėtumėte patvirtinti garantiją.

EVGA Official Websvetainė: www.evga.com

© 2026 EVGA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.