SentrySafe Executive Security Safe User Manual

1. Įvadas

This manual provides essential instructions for the proper setup, operation, and maintenance of your SentrySafe Executive Security Safe, Model PLX510487. This safe is designed to protect your valuables with an electronic lock and pry-resistant steel construction. Please read this manual thoroughly before using your safe to ensure optimal performance and security.

Figure 1: SentrySafe Executive Security Safe (Model PLX510487)

2. Saugos informacija

• Do not store safe keys inside the safe. Always keep override keys in a secure location away from the safe.
• Įsitikinkite, kad seifas yra tvirtai pritvirtintas, kad būtų išvengta neteisėto jo pašalinimo.
• Elektroninę klaviatūrą laikykite sausą ir švarią.
• This safe is not water resistant. Do not expose it to water or high humidity.
• Keep children away from the safe and do not allow them to operate the electronic lock.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi komponentai:

• SentrySafe Executive Security Safe (PLX510487)
• Nepaisyti klavišų (2)
• Tvirtinimo varžtai (tvirtinimui prie sienos)
• Vartotojo vadovas (šis dokumentas)

4. Sąranka

4.1 Išpakavimas

1. Atsargiai išimkite seifą iš pakuotės.
2. Inspect the safe for any signs of damage. If damaged, contact customer support.
3. Išsaugokite pakavimo medžiagas, jei prireiktų ateityje transportuoti.

4.2 Akumuliatoriaus įdėjimas

The electronic lock requires four (4) AA alkaline batteries (not included).

1. Raskite baterijų skyrių seifo durelių vidinėje pusėje.
2. Atidarykite akumuliatoriaus skyriaus dangtelį.
3. Insert four new AA alkaline batteries, ensuring correct polarity (+/-).
4. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.

4.3 Seifo montavimas

For enhanced security, it is recommended to wall mount the safe.

1. Choose a suitable location for mounting, ensuring it is a solid surface capable of supporting the safe's weight.
2. Open the safe door and locate the pre-drilled mounting holes on the back panel.
3. Position the safe against the wall and mark the drilling points through the mounting holes.
4. Drill pilot holes into the wall at the marked locations.
5. Align the safe with the drilled holes and secure it using the provided mounting bolts. Tighten all bolts firmly.

4.4 Initial Code Setup

Pirmą kartą naudojant, reikės nustatyti asmeninį elektroninį prieigos kodą.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinge. The yellow indicator light on the keypad will illuminate.
2. Per 5 sekundes klaviatūra įveskite norimą 3–8 skaitmenų kodą.
3. Press the 'A' or 'B' button to confirm your new code. The yellow light will turn off, and a beep will confirm the code is set.
4. Prieš uždarydami duris, išbandykite naują kodą atidarytomis.

5. Seifo valdymas

5.1 Opening the Safe with Electronic Code

1. Įveskite savo asmeninį 3–8 skaitmenų kodą klaviatūra.
2. Press the 'A' or 'B' button. The green indicator light will illuminate, and you will hear a beep.
3. Per 5 sekundes pasukite rankeną pagal laikrodžio rodyklę, kad atidarytumėte seifo dureles.

5.2 Opening the Safe with Override Key

In case of forgotten code or battery failure, use the override key.

1. Klaviatūros skydelyje suraskite rakto skylutės dangtelį.
2. Nuimkite dangtelį.
3. Insert the override key and turn it counter-clockwise.
4. While holding the key turned, turn the handle clockwise to open the safe door.
5. Po naudojimo ištraukite raktą ir uždėkite rakto skylutės dangtelį.

5.3 Seifo uždarymas ir užrakinimas

1. Tvirtai uždarykite seifo dureles.
2. Turn the handle counter-clockwise until it is fully engaged and the door is secured.
3. The safe will automatically lock.

5.4 Vartotojo kodo keitimas

1. Open the safe door using your current code or override key.
2. Press the red reset button on the inside of the door. The yellow indicator light will illuminate.
3. Within 5 seconds, enter your new 3-8 digit code.
4. Press the 'A' or 'B' button to confirm. The yellow light will turn off, and a beep will confirm the new code.
5. Test the new code with the door open before closing.

6. Priežiūra

6.1 Akumuliatoriaus keitimas

When the batteries are low, the red indicator light will flash when you enter your code. Replace batteries promptly to avoid lock-out.

1. Atidarykite seifo dureles.
2. Replace all four AA alkaline batteries as described in Section 4.2.
3. Your electronic code will be retained during battery replacement.

6.2 Valymas

Seifo išorę valykite minkšta,amp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

7. Problemų sprendimas

• Seifas neatsidaro su kodu:
  - Ensure batteries are fresh and installed correctly. Replace if necessary.
  - Re-enter the code carefully. Ensure no buttons are stuck.
  - Try using the override key to open the safe.
• Keypad does not respond:
  - Check battery installation and replace batteries.
  - Ensure no debris is obstructing the buttons.
• Forgotten code:
  - Use the override key to open the safe.
  - Once open, follow the steps in Section 5.4 to set a new user code.
• Durys neužsidaro / neužsirakina tinkamai:
  - Ensure no items are obstructing the door or locking bolts.
  - Check that the handle is fully turned counter-clockwise to engage the locking mechanism.

8. Specifikacijos

9. Garantija ir palaikymas

SentrySafe products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official SentrySafe website. For technical support, replacement parts, or further assistance, please contact SentrySafe customer service directly.

SentrySafe Official Websvetainė: www.sentrysafe.com