1. Įvadas
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Duluth Forge DLS-24R-1 Dual Fuel Ventless Fireplace Logs Set. This unit is designed to operate on either natural gas or liquid propane, offering a versatile heating solution for your indoor space. Please read this manual thoroughly before installation or use and retain it for future reference.
2. Svarbi saugos informacija
ĮSPĖJIMAS: Netinkamas montavimas, reguliavimas, keitimas, techninė priežiūra ar aptarnavimas gali sukelti sužalojimų ar turto sugadinimą. Žr. šį vadovą. Jei reikia pagalbos ar papildomos informacijos, kreipkitės į kvalifikuotą montuotoją, techninės priežiūros įmonę arba dujų tiekėją.
- 65 pasiūlymas Įspėjimas: Šis gaminys gali paveikti jus su cheminėmis medžiagomis, įskaitant anglies monoksidą, kuris Kalifornijos valstijoje, kaip žinoma, gali sukelti apsigimimų ar kitokią žalą reprodukcijai. Norėdami gauti daugiau informacijos, eikite į www.P65Warnings.ca.gov.
- This ventless gas log set is 99.9% efficient and does not require an outside duct or chimney.
- Equipped with a Safety Pilot O.D.S. (Oxygen Depletion Sensor) that automatically shuts down the unit if carbon monoxide or lack of oxygen is detected.
- Features Battery-Assisted Piezo ignition for reliable startup.
- Must be installed in a masonry or agency-approved firebox.
- Minimum Firebox Size Required: 20 inches (H) x 28 inches (W) in front (23 inches W at rear) x 15 inches (D).
- Designed for Indoor Use Only.
- Ensure adequate ventilation in the room where the unit is installed.
3. Sąranka ir diegimas
Professional installation by a qualified technician is highly recommended for gas connections to ensure safety and compliance with local codes.
3.1 Išpakavimas ir patikrinimas
- Atsargiai išimkite visus komponentus iš pakuotės.
- Inspect all items for any damage. Contact your retailer immediately if any damage is found.
- Ensure all listed components are present: 8 Hand Painted Ceramic Logs, Bag of Embers, Remote Control, Receiver Box, AA & AAA Batteries, Hardware Pack, Damper Clamp.
3.2 Akumuliatoriaus įdėjimas
- For the Ignition: Install 1 AAA battery into the designated ignition compartment on the main unit.
- Nuotolinio valdymo pultui: Install 2 AAA batteries into the remote control unit.
- For the Receiver Box: Install 4 AA batteries into the receiver box.
3.3 Imtuvo prijungimas
Connect the main unit with the receiver, ensuring that the receiver is in the OFF position before connecting. Refer to the included wiring diagram for proper connection.
3.4 Rąstų išdėstymas
The log set includes 8 hand-painted ceramic logs designed for a realistic appearance. Arrange the logs according to the diagram provided in the detailed instruction sheet included with your product. Proper log placement is crucial for optimal flame pattern and safe operation.
Vaizdas: pvzample of log arrangement for a natural appearance.
3.5 Ember Material Placement
Distribute the included bag of glowing ember material over the burner pan to enhance the realistic fire effect. Do not obstruct the burner ports.
Image: The Duluth Forge DLS-24R-1 log set with flames and glowing embers.
4. Naudojimo instrukcijos
4.1 Lighting the Pilot Flame
- Įsitikinkite, kad dujų tiekimas yra atidarytas.
- Press lightly on the control knob and turn it counter-clockwise to the PILOTAS padėtis.
- While holding the control knob in, press and hold the UŽDEGIMAS button until the pilot flame lights.
- Continue to hold the control knob in for approximately 30-60 seconds after the pilot lights to allow the thermocouple to heat up and stabilize the pilot flame. Release the knob slowly. If the pilot goes out, repeat the process.
4.2 Igniting the Main Burner (Remote Control)
Your log set includes a remote control for convenient operation.
Image: Remote control unit with display and buttons.
- Ensure the pilot flame is lit and stable.
- Set the receiver box to the NUOTOLINIS PULTAS padėtis.
- Press any button on the remote control to activate its display.
- Once the display is active, press the ON button on the remote control to ignite the main flame.
4.3 Adjusting Temperature and Mode
- Naudokite REŽIMAS button on the remote control to switch between manual mode and automatic constant temperature (thermostat) mode.
- In thermostat mode, use the up and down arrow buttons to set your desired room temperature. The unit will automatically adjust the flame to maintain this temperature.
4.4 Įrenginio išjungimas
- To turn off the main flame, press the IŠJUNGTA nuotolinio valdymo pulto mygtuką.
- To turn off the pilot flame, rotate the control knob on the main unit clockwise to the IŠJUNGTA position. Always turn off the pilot flame when the unit will not be used for an extended period.
5. Priežiūra
Regular maintenance ensures the longevity and safe operation of your fireplace logs.
- Valymo žurnalai: Periodically inspect the ceramic logs for soot buildup. Clean gently with a soft brush or cloth. Do not use abrasive cleaners.
- Degiklio valymas: Keep the burner ports free of dust and debris. Use a vacuum cleaner with a brush attachment to gently clean the burner area.
- Piloto surinkimas: Ensure the pilot assembly and ODS sensor are clean and free from obstructions.
- Bendra priežiūra: Keep the area around the fireplace clear of combustible materials.
Always ensure the unit is completely cool and the gas supply is turned off before performing any maintenance.
6. Problemų sprendimas
If you encounter issues, refer to the following common problems and solutions. For persistent problems, contact a qualified service technician.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Pilotinė lemputė neužsidega arba nedega. | No gas supply, air in gas line, thermocouple not heating, ODS sensor dirty. | Check gas supply. Bleed air from line. Hold pilot knob longer. Clean ODS sensor. |
| Pagrindinis degiklis neužsidega. | Pilot not lit, receiver in OFF position, remote batteries low, gas valve closed. | Ensure pilot is lit. Set receiver to REMOTE. Replace remote batteries. Check gas valve. |
| Nuotolinio valdymo pultas nereaguoja. | Low batteries, receiver out of range, receiver in OFF position. | Replace remote/receiver batteries. Move closer to unit. Set receiver to REMOTE. |
| Neįprasti kvapai eksploatacijos metu. | Initial burn-off of manufacturing oils/paint, inadequate ventilation. | Ensure proper ventilation. Odor should dissipate after initial use. If persistent, consult technician. |
7. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | DLS-24R-1 |
| Prekės ženklas | Duluth Forge |
| Šilumos išėjimas | 33,000 XNUMX BTU |
| Šildymo aprėptis | Iki 1,300 kv. |
| Kuro tipas | Dual Fuel (Natural Gas or Liquid Propane) |
| Medžiaga | Ceramic, Oak |
| Gaminio matmenys (D x P x A) | 15" x 20" x 28" |
| Prekės svoris | 30 svaro |
| Vėdinimo tipas | „Vent Free“ |
| Ypatinga funkcija | Nuotolinio valdymo pultas |
| Įtraukti komponentai | 8 Hand Painted Ceramic Logs, Bag of Embers, Remote Control, Receiver Box, AA & AAA Batteries, Hardware Pack, Damper Clamp |
Image: Product dimensions and minimum firebox requirements.
8. Garantija
This Duluth Forge product comes with a Ribota garantija. For specific details regarding coverage, duration, and terms, please refer to the warranty information included in your product packaging or contact Duluth Forge customer support directly. Keep your proof of purchase for warranty claims.
9. Pagalba klientams
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Duluth Forge customer support. Refer to your product packaging or the official Duluth Forge websvetainę, kurioje rasite naujausią kontaktinę informaciją.