„Finder“ 27 serijos 270182300000 tipo elektromechaninės impulsinės relės naudotojo vadovas

1. Įvadas

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Finder Series 27 Type 270182300000 Electromechanical Pulse Relay. Please read this manual thoroughly before using the product and retain it for future reference.

The Finder Series 27 pulse relay is a 10 A, unipolar switch with 1 normally open (NO) contact, designed for AC 50/60 Hz systems at 230 V. It features a standard design with socket clamps for connection and is suitable for panel mounting.

2. Saugos informacija

ĮSPĖJIMAS: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Always disconnect power before installing, servicing, or removing the relay.
• Užtikrinkite tinkamą įžeminimą, kad išvengtumėte elektros smūgio.
• Patikrinkite, ar tiekimo ttage and current ratings match the relay's specifications.
• Do not operate the relay in environments exceeding its specified temperature or humidity limits.
• Avoid exposing the relay to moisture or corrosive substances.

3. Produktas baigtasview

The Finder Series 27 Electromechanical Pulse Relay is designed for applications requiring sequential switching, such as lighting control. Key features include:

• Skydo tvirtinimas: Designed for secure installation within electrical panels.
• AC Coils: Operates with alternating current.
• 1 NO Contact: Features one normally open contact for switching circuits.
• 3 Sequences Available: Supports various operational sequences.
• Didelė galia: Įvertinta už 10 Amps and 2400 Watts at 230 Volts.

3.1 paveikslas: Priekyje view of the Finder Series 27 Electromechanical Pulse Relay, showing its transparent casing and terminal connections.

4. Sąranka ir diegimas

This pulse relay is designed for panel mounting. Follow these steps for proper installation:

1. Maitinimo atjungimas: Ensure all power to the installation area is disconnected at the main circuit breaker before beginning any work.
2. Montavimas: Securely mount the relay within an electrical panel using appropriate fasteners. The relay dimensions are approximately 1.26 x 2.17 x 2.76 inches.
3. Laidų jungtys:
   • Identify the three terminals on the relay.
   • Connect the control circuit wires to the coil terminals (A1, A2) as indicated on the relay. The coil voltage is 230 Volts AC.
   • Connect the load circuit wires to the contact terminals (1 NO) using the clamp-type connectors. The relay is rated for 10 Amps.
   • Įsitikinkite, kad visos jungtys yra tvirtos ir saugios, kad išvengtumėte atsilaisvinusių kontaktų ir perkaitimo.
4. Patvirtinimas: Double-check all wiring against the electrical diagram for your specific application.
5. Energijos atstatymas: Kai įrengimas bus baigtas ir patikrintas, atkurkite elektros tiekimą į grandinę.

4.1 paveikslas: Išsamus view of the Finder Series 27 Relay's screw terminals, illustrating connection points for wiring.

5. Naudojimo instrukcijos

The Finder Series 27 pulse relay operates automatically based on the control signals it receives. It is commonly used in applications where a momentary input signal triggers a change in the output state, which then remains until the next momentary input.

• When a pulse is applied to the coil terminals (A1, A2), the internal mechanism latches, changing the state of the 1 NO contact.
• The contact remains in this new state even after the control pulse is removed.
• A subsequent pulse will revert the contact to its original state.
• The relay supports three distinct operational sequences, which are determined by the specific model variant and internal configuration. Refer to your system's wiring diagram for the exact sequence implemented.

5.1 paveikslas: Example of the Finder Series 27 Relay integrated into a kitchen lighting system, demonstrating its application in controlling light fixtures.

5.2 paveikslas: The Finder Series 27 Relay shown in a living room setting, illustrating its use for managing multiple light sources.

6. Priežiūra

The Finder Series 27 pulse relay is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:

• Vizuali apžiūra: Periodiškai tikrinkite relę, ar nėra kokių nors fizinių pažeidimų, spalvos pakitimų ar atsilaisvinusių jungčių.
• Valymas: Jei reikia, švelniai nuvalykite relės išorę sausa, minkšta šluoste. Nenaudokite tirpiklių ar abrazyvinių valiklių.
• Ryšio patikrinimas: Įsitikinkite, kad visos laidų jungtys yra tvirtos ir patikimos.
• Aplinkos sąlygos: Įsitikinkite, kad darbo aplinka neviršija nurodytų temperatūros ir drėgmės diapazonų.

Pastaba: The relay is a sealed unit and is not user-serviceable internally. Do not attempt to open the casing.

7. Problemų sprendimas

If the Finder Series 27 pulse relay is not functioning as expected, consider the following troubleshooting steps:

• No Response to Control Signal:
  • Check if power is supplied to the control circuit and the relay coil (A1, A2).
  • Verify that the control signal voltage matches the relay's coil voltage (230 V kintamoji srovė).
  • Inspect control circuit wiring for breaks or loose connections.
• Apkrova neperjungiama:
  • Ensure the relay is receiving control pulses and its internal mechanism is audibly clicking or visibly changing state (if applicable).
  • Check the load circuit wiring for continuity and secure connections.
  • Verify that the load current does not exceed the relay's 10 Amp įvertinimas.
  • Confirm that the load itself is functional.
• Relay Overheating:
  • Ensure the load current does not exceed the relay's maximum rating.
  • Check for proper ventilation around the relay within the panel.
  • Patikrinkite, ar aplinkos temperatūra yra nurodytame darbiniame diapazone.

If issues persist after performing these checks, contact a qualified electrician or Finder technical support.

8. Specifikacijos

9. Garantija ir palaikymas

For information regarding warranty coverage, technical support, or service, please contact Finder directly through their official websvetainėje arba pas įgaliotus platintojus. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Gamintojas: RASTI

Dalies numeris: 27.01.8.230.0000