APOLLO APXV3434 3/4 Inch PEX Brass Ball Valve User Manual

1. Įvadas

The APOLLO APXV3434 is a 3/4 inch PEX Brass Ball Valve designed for reliable flow control in plumbing systems. This quarter-turn valve is suitable for both new construction and remodeling projects, offering quick and secure connections without the need for flames, glues, fluxes, or solvents.

Pagrindinės funkcijos:

• 3/4 inch diameter for standard PEX pipe applications.
• Designed for use with Apollo PEX pipe.
• Provides quick and mess-free connections.
• Žalvarinė korpuso konstrukcija ilgaamžiškumui.
• NSF Approved and meets ASTM F1807 standards.

2. Saugos informacija

Prieš montuodami ir naudodami, perskaitykite ir supraskite visas instrukcijas. Nesilaikant šių instrukcijų, galite sugadinti turtą, susižaloti ar net žūti.

• Montavimo metu visada dėvėkite tinkamas asmenines apsaugos priemones (AAP), įskaitant apsauginius akinius ir pirštines.
• Ensure the water supply is turned off and the system is depressurized before beginning any installation or maintenance.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (California Proposition 65 Warning). Wash hands after handling.
• Do not use this valve for applications exceeding its specified temperature and pressure ratings (32 - 180°F).

3. Sąranka ir diegimas

This valve is designed for crimp-style PEX connections. Ensure you have the correct PEX crimping tools and PEX pipe for a secure installation.

3.1. Paruošimas

1. Išjunkite pagrindinį vandens tiekimą toje vietoje, kurioje bus sumontuotas vožtuvas.
2. Išleiskite vandenį iš vamzdžių, kad sumažintumėte slėgį.
3. Gather all necessary tools: PEX pipe cutter, PEX crimping tool, PEX crimp rings, and Apollo PEX pipe.
4. Inspect the valve for any visible damage before installation.

3.2. Diegimo žingsniai

1. Cut the PEX pipe to the desired length using a PEX pipe cutter, ensuring a clean, square cut.
2. Slide a PEX crimp ring onto the PEX pipe.
3. Insert the PEX pipe fully onto the valve's PEX barb fitting. Ensure the pipe is seated against the shoulder of the fitting.
4. Position the crimp ring over the barb fitting, approximately 1/8 inch from the end of the pipe.
5. Using the PEX crimping tool, crimp the ring firmly. Ensure the crimp is complete and secure according to the crimping tool manufacturer's instructions.
6. Repeat the process for the other side of the valve.
7. Once both connections are made, slowly turn on the water supply and check for leaks.

Figure 1: APOLLO 3/4 Inch PEX Brass Ball Valve. This image shows the valve with its white handle in the closed position, ready for PEX pipe connections on both ends.

Figure 2: APOLLO 3/4 Inch PEX Brass Ball Valve, showing the NSF approval marking on the handle. The valve is depicted with its PEX crimp connections.

4. Naudojimo instrukcijos

The APOLLO APXV3434 is a quarter-turn ball valve, meaning it requires only a 90-degree rotation of the handle to fully open or close the flow.

• Norėdami atidaryti vožtuvą: Rotate the handle so it is parallel with the direction of the pipe. This allows full flow through the valve.
• Norėdami uždaryti vožtuvą: Rotate the handle 90 degrees so it is perpendicular to the direction of the pipe. This stops the flow completely.

5. Priežiūra

The APOLLO APXV3434 ball valve is designed for long-term, maintenance-free operation under normal conditions. However, periodic inspection is recommended.

• Kasmetinė apžiūra: Vizualiai patikrinkite vožtuvą ir jungtis, ar nėra nuotėkio, korozijos ar pažeidimų požymių.
• Veikimo patikrinimas: Periodically operate the valve (open and close it fully) to ensure smooth movement and prevent seizing, especially in systems that remain open or closed for extended periods.
• Valymas: If necessary, clean the exterior of the valve with a mild detergent and water. Do not use harsh chemicals or abrasive cleaners.

6. Problemų sprendimas

Most issues with ball valves are related to improper installation or extreme operating conditions.

• Nuotėkis jungtyse: Ensure PEX crimp rings are properly seated and crimped. Re-crimp if necessary, or replace the crimp ring and re-crimp. Verify the PEX pipe is fully inserted onto the barb fitting.
• Difficulty Turning Handle: If the valve handle is stiff, it may be due to mineral buildup or infrequent use. Operating the valve several times may free it. If it remains stiff or seizes, the valve may need replacement.
• Sumažintas srautas: Check for obstructions in the pipe system upstream or downstream of the valve. Ensure the valve is fully open (handle parallel to the pipe).

7. Specifikacijos

8. Garantija ir palaikymas

For specific warranty information or technical support regarding your APOLLO APXV3434 3/4 Inch PEX Brass Ball Valve, please contact APOLLO customer service directly. Refer to the product packaging or the official APOLLO websvetainėje rasite naujausią kontaktinę informaciją ir garantijos sąlygas.