Westek SW103CT Outdoor Swivel Photo Control Instruction Manual

Įvadas

The Westek SW103CT Outdoor Swivel Photo Control is designed to automate your outdoor lighting. This device utilizes a photocell sensor to detect ambient light levels, automatically turning connected lights on at dusk and off at dawn. This manual provides essential information for safe installation, proper operation, and maintenance of your photo control unit.

Image: Two Westek SW103CT Outdoor Swivel Photo Controls, illustrating the product's appearance and wiring.

Saugos informacija

• ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą nuo grandinės pertraukiklio arba saugiklių dėžutės.
• Montavimą turėtų atlikti kvalifikuotas elektrikas arba asmuo, turintis elektros žinių.
• Įsitikinkite, kad visi laidų sujungimai yra tvirti ir atitinka vietinius elektros kodeksus.
• This product is designed for outdoor use. While the sensor itself is described as weather-proof, ensure all electrical connections are properly sealed and protected from direct water exposure to prevent damage and ensure safety. The product is not submersible.
• Neviršykite didžiausios galiostage rating of 150 watts for connected lighting.
• Naudokite tik nurodytame tūryjetage range (2 Volts, typically 120V AC for household applications, please verify your specific application voltagir).

Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• Westek SW103CT Outdoor Swivel Photo Control (2 units)
• Montavimo įranga

Specifikacijos

Image: Key features of the Westek SW103CT, highlighting the photocell sensor, swivel adjustment, and weatherproof construction.

Montavimas

Prieš pradėdami: Ensure power is disconnected at the circuit breaker. Failure to do so may result in serious injury or death.

1. Paruoškite laidus: The photo control unit comes with 6-inch pre-stripped leads for easy connection.
2. Montavimas: The unit connects directly to a standard 1/2-inch pipe thread electrical box. Secure the photo control to the electrical box using the provided mounting hardware.
3. Laidų jungtys: Connect the photo control wires to your electrical system as follows:
   • Juodas laidas: Connect to the incoming Linija (karšta) wire from your power source.
   • Balta viela: Prisijunkite prie Neutralus wire from your power source and to the neutral wire of your light fixture.
   • Raudonas laidas: Prisijunkite prie Load (Hot) wire of your outdoor light fixture.
   Ensure all connections are tight and insulated with appropriate wire connectors.
4. Padėties nustatymas: The swivel feature allows for optimal light positioning of the photocell sensor. Aim the sensor away from direct artificial light sources (e.g., porch lights, streetlights) that could interfere with its operation. Ensure it has clear exposure to natural daylight.
5. Atkurti maitinimą: Kai įrengimas baigtas ir visos jungtys pritvirtintos, atkurkite elektros tiekimą automatiniu jungikliu.

Image: Westek SW103CT photo control with visible wiring for electrical connection.

Image: Installation details for the Westek SW103CT, showing connection to an electrical box and maximum wattage.

Operacija

The Westek SW103CT Photo Control operates automatically based on ambient light levels:

• Sutemų aktyvavimas: When natural light diminishes to a certain level (dusk), the photocell sensor will activate, turning on the connected outdoor lights.
• Aušros deaktyvavimas: As natural light increases to a sufficient level (dawn), the photocell sensor will deactivate, turning off the connected outdoor lights.
• Laiko delsa: The unit incorporates a time delay feature to prevent nuisance flickering or false activation/deactivation due to transient light changes (e.g., car headlights, lightning).

Priežiūra

To ensure optimal performance and longevity of your photo control unit:

• Švarus jutiklis: Periodically inspect the photocell sensor lens for dirt, dust, or debris. Gently wipe it clean with a soft, damp audinys. Nenaudokite abrazyvinių valiklių.
• Patikrinkite jungtis: Annually, or if issues arise, inspect all electrical connections for corrosion or looseness. Ensure they remain secure and properly insulated.
• Išvalytos kliūtys: Ensure no new obstructions (e.g., growing foliage, new structures) are blocking the sensor's exposure to natural light.

Trikčių šalinimas

Garantija ir palaikymas

For warranty information, technical support, or replacement parts, please contact Westek customer service. Keep your purchase receipt as proof of purchase.

Gamintojas: American Tack

Websvetainė: Visit the Westek Store on Amazon