1. Įvadas
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Fengda FD-186 Professional Airbrush Compressor. Please read this manual thoroughly before using the compressor and retain it for future reference.
The Fengda FD-186 is a compact, oil-free mini compressor designed for precision airbrushing. It features a 3-liter air tank, a pressure regulator with a filter and manometer, and an automatic start/stop function for consistent air pressure. Its quiet operation and portability make it ideal for various applications, including airbrushing, cosmetic studios, nail art, tattooing, and hobby use. This compressor is compatible with airbrushes featuring nozzles from 0.2mm to 1mm.
1.1 paveikslas: Visas view of the Fengda FD-186 Professional Airbrush Compressor.
2. Saugos instrukcijos
ĮSPĖJIMAS: Nesilaikant šių saugos nurodymų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.
- Elektros sauga: Ensure the compressor is connected to a properly grounded outlet with the correct voltage (220-240V / 50Hz). Do not operate with damaged cords or plugs. Keep the power cord away from heat, oil, and sharp edges.
- Slėgio sauga: Never exceed the maximum operating pressure of 4 bars (57 PSI). Do not tamper with the safety/drain valve. Always release air pressure from the tank before disconnecting hoses or performing maintenance.
- Vėdinimas: Operate the compressor in a well-ventilated area to prevent overheating. Do not block air vents.
- Asmeninė apsauga: Wear appropriate personal protective equipment, such as safety glasses, when operating the airbrush system.
- Vaikai ir augintiniai: Kompresoriui veikiant, laikykite vaikus ir naminius gyvūnus atokiau nuo jo.
- Saugykla: Store the compressor in a dry, clean, and secure location when not in use.
- Numatytas naudojimas: Use the compressor only for its intended purpose of airbrushing and related applications as described in this manual.
3. Produktas baigtasview ir komponentai
The Fengda FD-186 compressor is designed for ease of use and reliable performance. Key components include:
- Kompresoriaus blokas: The main motor and pump assembly.
- Oro bakas (3 litrų): Stores compressed air to ensure a consistent, pulse-free airflow.
- Slėgio reguliatorius: Leidžia reguliuoti išėjimo oro slėgį.
- Manometras (slėgio matuoklis): Rodo dabartinį oro slėgį.
- Oro filtras: Removes moisture and particles from the air, preventing contamination of your work.
- Safety/Drain Valve: Dėl laisvo laikoasing pressure and draining condensed moisture from the air tank.
- Maitinimo jungiklis: To turn the compressor on and off.
- Nešiojimo rankena: Kad būtų lengviau pernešti.
3.1 Pagrindinės savybės
- Powerful and constant working pressure.
- Very quiet operation (47 dB).
- Oil-free design, requiring minimal maintenance.
- Portable due to its low weight.
- Automatic start at 3 BAR (43 PSI) and automatic stop at 4 BAR (57 PSI).
- 3-liter pressure vessel ensures balanced air output.
- Equipped with a safety/drain valve.
- Automatic overheat protection for enhanced safety and durability.
Image 3.1: Close-up of the pressure gauge and regulator with air filter.
Image 3.2: Detail of the power switch.
Image 3.3: Detail of the air tank drain valve.
3.4 pav.: Viršus view of the compressor head.
4. Sąranka
- Išpakavimas: Carefully remove the compressor from its packaging. Inspect for any signs of damage during transit.
- Vieta: Kompresorių pastatykite ant stabilaus, lygaus paviršiaus gerai vėdinamoje vietoje. Įsitikinkite, kad aplink įrenginį yra pakankamai vietos oro cirkuliacijai.
- Connect Airbrush Hose: Connect your airbrush hose to the G 1/8 air connection port on the pressure regulator. Ensure the connection is secure to prevent air leaks.
- Prijunkite maitinimą: Plug the power cable into a grounded 220-240V / 50Hz electrical outlet.
- Pradinis patikrinimas: Before first use, ensure all connections are tight and the drain valve on the air tank is closed.
5. Naudojimo instrukcijos
- Maitinimas: Flip the power switch to the "ON" position. The compressor will start to fill the air tank.
- Automatinis veikimas: The compressor will automatically stop once the pressure in the 3-liter air tank reaches 4 BAR (57 PSI). It will then automatically restart when the pressure drops to 3 BAR (43 PSI) during use. This ensures a consistent air supply without constant motor operation.
- Slėgio reguliavimas: Use the knob on the pressure regulator to adjust the desired working pressure. Turn clockwise to increase pressure and counter-clockwise to decrease it. Monitor the manometer to set the precise pressure required for your airbrushing task.
- Airbrush Use: Once the desired pressure is set, you can begin using your airbrush. The air filter will ensure clean, dry air is delivered to your airbrush.
- Išjungti: After use, turn off the compressor by flipping the power switch to the "OFF" position.
- Release Residual Pressure: It is recommended to release any residual air pressure from the tank by opening the drain valve or briefly activating your airbrush until the manometer reads zero.
5.1 Produkto demonstracinis vaizdo įrašas
5.1 vaizdo įrašas: trumpa apžvalgaview and demonstration of the Fengda FD-186 Airbrush Compressor.
Video 5.2: Demonstration of the Wiltec AF186 compressor, which shares similar operational principles with the Fengda FD-186.
6. Priežiūra
Reguliarus kompresoriaus aptarnavimas užtikrina jo ilgaamžiškumą ir optimalų veikimą.
- Išleiskite oro baką: After each use, or at least daily, open the drain valve at the bottom of the air tank to release any accumulated moisture. This prevents rust and extends the tank's life.
- Švaraus oro filtras: Periodically check the air filter on the pressure regulator. If it appears dirty, clean or replace it according to the manufacturer's recommendations to ensure clean air delivery.
- Bendras valymas: Nuvalykite kompresoriaus išorę reklaminiu valikliu.amp šluoste dulkes ir šiukšles pašalinti. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
- Patikrinkite jungtis: Regularly inspect all air connections and hoses for leaks or damage. Tighten any loose connections.
- Apsauga nuo perkaitimo: The compressor has automatic overheat protection. If it shuts down due to overheating, allow it to cool down completely before restarting. Ensure proper ventilation.
7. Problemų sprendimas
Dažniausiai pasitaikančias problemas ir jų sprendimus žr. šioje lentelėje:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Kompresorius neįsijungia. | No power, power switch off, thermal overload. | Check power connection and outlet. Ensure power switch is ON. Allow compressor to cool down if it overheated. |
| Nėra oro išleidimo arba žemas slėgis. | Air tank empty, pressure regulator set too low, air leaks, clogged air filter. | Allow tank to fill. Adjust pressure regulator. Check all connections for leaks. Clean or replace air filter. |
| Inconsistent air pressure (pulsation). | Air tank not fully pressurized, regulator malfunction. | Ensure air tank is allowed to fill completely. If problem persists, contact support. |
| Kompresorius perkaista ir išsijungia. | Prolonged use, poor ventilation. | Allow the unit to cool down. Ensure adequate ventilation around the compressor. Avoid continuous operation for extended periods. |
| Excessive moisture in air output. | Air tank not drained, clogged air filter. | Regularly drain the air tank. Clean or replace the air filter. |
8. Specifikacijos
| Specifikacija | Vertė |
|---|---|
| Prekės ženklas | Fengda |
| Modelio pavadinimas | FD-186 |
| Modelio numeris | AS-186 |
| ttage | 220–240 V / 50 Hz |
| Galia | 0.123 kW (1/6 hp) |
| Greitis | 1450/1700 aps./min |
| Triukšmo lygis | 47 dB / 1m |
| Oro srautas | 20-23 l/min (21.5 L/min) |
| Oro jungtis | G 1/8 |
| Kabelio ilgis | 1.9 m |
| Sertifikatai | CE, GS, ETL, CETL, ROHS |
| Reguliuojamas slėgis | 0 bar to 4 bars |
| Automatinis paleidimo slėgis | 3 BAR (43 PSI) |
| Automatinis stabdymo slėgis | 4 BAR (57 PSI) |
| Pressure Regulator Range | 0 – 10 Bars (0-100 PSI) |
| Oro bako talpa | 3 litrai |
| Matmenys (I x P x A) | 33 L x 15 W x 34 A cm |
| Svoris | 11.02 svaro (apie 5 kg) |
| Medžiaga | Metalas |
| Rekomenduojamas naudojimas | Aerografija |
Image 8.1: Dimensions of the Fengda FD-186 Airbrush Compressor.
9. Garantija ir palaikymas
Specific warranty information was not provided in the product details. Please refer to your purchase documentation or contact your retailer for details regarding warranty coverage and customer support.
For technical assistance or inquiries, please contact Fengda customer service or your authorized dealer.