Fengda FD-196A Professional Airbrush Compressor User Manual

1. Įvadas

Thank you for choosing the Fengda FD-196A Professional Airbrush Compressor. This oil-free mini compressor is designed for precision airbrush applications, featuring an integrated 3.5-liter air tank and a pressure regulator with a filter and manometer. Its quiet operation and portable design make it suitable for various uses, including airbrushing, cosmetic studios, nail art, tattoo applications, and general hobby work. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your compressor.

2. Saugos instrukcijos

Please read and understand all safety instructions before operating the compressor. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Elektros sauga: Ensure the compressor is connected to a grounded power outlet with the correct voltage (220-240 V / 50 Hz). Do not operate the compressor with a damaged power cord or plug. Keep the power cord away from heat, oil, sharp edges, or moving parts.
• Slėgio sauga: Never exceed the maximum operating pressure of 6 bars (87 PSI). Do not tamper with the safety/purge valve. Always release air pressure from the tank before performing maintenance or disconnecting accessories.
• Vėdinimas: Operate the compressor in a well-ventilated area. Ensure adequate airflow around the unit to prevent overheating. Do not cover the compressor during operation.
• Asmeninės apsaugos priemonės: Wear appropriate eye and respiratory protection when airbrushing.
• Vaikai ir pašaliniai asmenys: Keep children and bystanders away from the operating compressor and airbrushing area.
• Numatytas naudojimas: Use the compressor only for its intended purpose as an air source for airbrushing and similar applications. Do not use it for breathing air supply.
• Priežiūra: Prieš atlikdami bet kokius techninės priežiūros ar valymo darbus, visada atjunkite maitinimo šaltinį.
• Apsauga nuo perkaitimo: The compressor is equipped with automatic overheat protection. If the unit shuts down due to overheating, allow it to cool down completely before restarting.

3. Pakuotės turinys

Carefully unpack the compressor and check for any damage. Ensure all items listed below are present.

• 1x Fengda FD-196A Airbrush Compressor with Air Tank
• 1x Pressure Regulator with Filter and Manometer
• 1x maitinimo laidas
• 1x vartotojo vadovas

Figure 3.1: Compressor as received in its protective packaging.

4. Produktas baigtasview

Familiarize yourself with the main components of your Fengda FD-196A compressor.

4.1 pav.: priekis view of the Fengda FD-196A Airbrush Compressor with its protective metal case.

Figure 4.2: Compressor body without the metal case, illustrating the dual-piston design, air tank, and connection points.

• Oro cisterna: 3.5-liter capacity, ensures consistent air pressure and reduces compressor cycling.
• Slėgio reguliatorius: Allows adjustment of output air pressure.
• Filtras: Integrated into the pressure regulator to remove moisture and particles from the air.
• Manometras: Displays the current output air pressure.
• Safety/Purge Valve: Located on the air tank for safety and draining condensation.
• Maitinimo jungiklis: Controls the compressor's power.
• Oro išleidimo anga: G 1/8" connection for air hose.

5. Sąranka

1. Vieta: Place the compressor on a stable, level surface in a well-ventilated area. Ensure there is sufficient space around the unit for airflow.
2. Attach Pressure Regulator: Screw the pressure regulator assembly onto the air outlet port of the compressor. Hand-tighten firmly.
3. Prijunkite oro žarną: Connect your airbrush hose (not included, typically 1/8" fitting) to the output of the pressure regulator. Ensure a secure connection to prevent air leaks.
4. Maitinimo jungtis: Plug the power cable into the compressor's power inlet, then into a suitable grounded 220-240V / 50Hz electrical outlet.

6. Naudojimo instrukcijos

1. Maitinimas: Flip the power switch to the "ON" position. The compressor will start to fill the air tank. The manometer will show the increasing slėgis.
2. Automatinis veikimas: The compressor features automatic start/stop functionality. It will automatically stop when the tank pressure reaches approximately 4 BAR (57 PSI) and restart when the pressure drops to approximately 3 BAR (43 PSI).
3. Išėjimo slėgio reguliavimas:
   • Turn the knob on the pressure regulator to adjust the desired working pressure for your airbrush.
   • The manometer will display the regulated output pressure.
   • Once the desired pressure is set, you can lock the knob (if applicable) to prevent accidental changes.
4. Continuous Mode (Optional): This compressor may offer a second mode where it operates continuously and stops at a higher pressure (e.g., 6 BAR). Consult your specific unit's markings or included manual for details on activating this mode, if available. This mode is generally for applications requiring higher, sustained pressure, not typical airbrushing.
5. Išjungti: After use, turn off the power switch. Disconnect the airbrush and release any remaining pressure from the air tank by briefly opening the safety/purge valve or by using the airbrush until the pressure gauge reads zero.

7. Priežiūra

Regular maintenance ensures the longevity and optimal performance of your compressor. Always disconnect the power before performing maintenance.

• Drenažo kondensatas: The air tank accumulates condensation. Regularly drain the water from the air tank using the safety/purge valve at the bottom of the tank. This prevents rust and ensures clean, dry air.
• Švaraus oro filtras: The pressure regulator includes an air filter. Periodically check and clean this filter to ensure proper airflow and prevent contaminants from reaching your airbrush. If the compressor has internal cylinder filters, these should also be checked and cleaned as per the manufacturer's instructions (e.g., by unscrewing and cleaning the metallic mesh filters).
• Bendras valymas: Keep the exterior of the compressor clean and free of dust. Ensure ventilation openings are unobstructed.
• Dizainas be alyvos: This compressor is oil-free and does not require lubrication. Do not attempt to add oil to any part of the compressor.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

Specific warranty terms and conditions for the Fengda FD-196A compressor may vary by region and retailer. Please refer to the warranty information provided at the time of purchase or contact your retailer for details regarding warranty coverage and claims.

For technical support or inquiries not covered in this manual, please contact the manufacturer or your authorized dealer.