Fengda Mini Airbrush Compressor FD-18-2 User Manual

1. Įvadas

Thank you for choosing the Fengda Mini Airbrush Compressor FD-18-2. This oil-free piston compressor is designed for various applications, including airbrushing, cosmetics, nail art, tattoos, hobbies, and home use. Its compact size and low noise level make it suitable for both professional and personal environments. Please read this manual thoroughly before operation to ensure safe and efficient use.

2. Saugos instrukcijos

ĮSPĖJIMAS: Nesilaikant šių saugos nurodymų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.

• Visada įsitikinkite, kad maitinimo šaltinis atitinkatage specified on the compressor (220-240V / 50Hz).
• Nenaudokite kompresoriaus drėgnomis sąlygomis arba šalia degių skysčių ar dujų.
• Laikykite vaikus ir neįgaliotus asmenis atokiau nuo darbo zonos.
• Always disconnect the power plug before performing any maintenance or cleaning.
• Do not modify the compressor or its components. Use only original replacement parts.
• Ensure adequate ventilation during operation to prevent overheating. The compressor has thermal protection, but proper airflow is crucial.
• Niekada nenukreipkite oro srovės į žmones ar gyvūnus.
• Wear appropriate personal protective equipment, such as eye protection, when operating the airbrush system.
• The compressor is designed for intermittent use. Avoid continuous operation for extended periods to prevent overheating.

3. Produktas baigtasview

The Fengda FD-18-2 is a compact, oil-free piston compressor featuring a pressure regulator, filter, and manometer for precise control and clean air delivery. It is designed for quiet operation and portability.

3.1 Įtraukti komponentai

• 1 x Fengda FD-18-2 Mini Airbrush Compressor (without air tank)
• 1 x Output Pressure Regulator with Filter and Manometer
• 1x maitinimo laidas
• 1 x Vartotojo vadovas

3.2 Pagrindinės savybės

• Oil-free piston design ensures clean air without oil contamination.
• Integrated pressure regulator with filter and manometer for precise pressure adjustment and moisture separation.
• Automatic start at 3 bar (43.5 PSI) and automatic stop at 4 bar (58 PSI) for efficient operation.
• Thermal protection against overload or overheating.
• Low noise level (47 dB) for comfortable use in various environments.
• Portable and lightweight design with rubber feet for stability.
• Suitable for airbrushes with nozzle sizes from 0.2 mm to 1.0 mm.
• Ideal for model painting, body painting, nail art, fine arts, car painting, touch-ups, cake decorating, textile and t-shirt painting, or other painting applications.

1 pav. Baigtaview of the Fengda FD-18-2 Mini Airbrush Compressor, showing the main unit, pressure regulator, filter, and power cable.

4. Sąranka ir diegimas

1. Išpakavimas: Atsargiai išimkite visus komponentus iš pakuotės. Patikrinkite, ar transportavimo metu nebuvo pažeista.
2. Vieta: Place the compressor on a stable, flat surface. Ensure the rubber feet are securely positioned to minimize vibration. Allow sufficient space around the unit for proper ventilation.
3. Pritvirtinkite reguliatorių: The pressure regulator with filter and manometer typically comes pre-attached or needs to be screwed onto the air outlet port of the compressor. Ensure it is hand-tightened securely to prevent air leaks.
4. Connect Airbrush Hose: Connect your airbrush hose to the G 1/8" air outlet thread on the pressure regulator. Ensure a tight connection.
5. Maitinimo jungtis: Plug the power cable into a suitable grounded electrical outlet (220-240V / 50Hz).

2 pav. Išsamus view of the pressure regulator, filter, and manometer, essential for controlling air pressure and ensuring clean air.

5. Operacija

1. Maitinimas: Flip the power switch to the "ON" position. The compressor will start and build pressure until it reaches approximately 4 bar (58 PSI), then it will automatically shut off.
2. Sureguliuokite slėgį: Use the knob on the pressure regulator to adjust the desired working pressure. Turn clockwise to increase pressure, counter-clockwise to decrease. The manometer will display the current output pressure.
3. Begin Airbrushing: Once the desired pressure is set, you can begin using your airbrush. The compressor will automatically restart when the pressure drops to approximately 3 bar (43.5 PSI) and stop again when it reaches 4 bar (58 PSI).
4. Drėgmės gaudyklė: The integrated filter acts as a moisture trap. Periodically check the transparent bowl for accumulated moisture.
5. Išjungti: When finished, turn off the compressor using the power switch and disconnect it from the power outlet.

3 pav. Iš arti view of the manometer, indicating the adjustable air pressure output.

6. Priežiūra

Reguliarus kompresoriaus aptarnavimas užtikrina jo ilgaamžiškumą ir optimalų veikimą.

• Drain Moisture Trap: Regularly check and drain any accumulated moisture from the filter/moisture trap. This prevents water from reaching your airbrush and paint. To drain, unscrew the small valve at the bottom of the transparent bowl.
• Švarus išorė: Nuvalykite kompresoriaus išorę reklaminiu valikliuamp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Oro filtras: The compressor has an internal air filter. While not user-serviceable in the same way as the moisture trap, ensure the air intake vents are clear of dust and debris.
• Saugykla: When not in use, store the compressor in a clean, dry, and dust-free environment.

7. Problemų sprendimas

8. Specifikacijos

9. Garantija ir palaikymas

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Fenghua Bida Machinery Manufacture CO., LTD