HyperX Savage DDR4 Memory Module User Manual

Įvadas

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Vaizdas: priekis view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Pakuotės turinys

Patikrinkite, ar jūsų pakuotėje yra šie elementai:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Sąranka ir diegimas

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Paruošimas

1. Suderinamumo patikrinimas: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Išjungti: Visiškai išjunkite kompiuterį ir atjunkite maitinimo laidą.
3. Atvira byla: Open your computer's side panel to access the motherboard.

2. Modulio montavimas

1. DIMM lizdų paieška: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Atidaryti klipus: Gently push down the retention clips at both ends of the DIMM slot.
3. Lygiavimo modulis: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Įterpti modulį: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Pakartokite: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Vaizdas: kampuotas view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Po įrengimo

1. Uždaryti bylą: Pritvirtinkite kompiuterio korpuso šoninį skydelį.
2. Iš naujo prijunkite maitinimą: Prijunkite maitinimo laidą atgal prie kompiuterio ir įjunkite jį.

Naudojimo instrukcijos

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) proffiles. Šie profesionalaifiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. Prieiga prie BIOS / UEFI: Sistemos paleidimo metu pakartotinai paspauskite atitinkamą klavišą (dažniausiai DEL, F2, F10, arba F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. Raskite XMP nustatymą: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Įjungti profesionaląfile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Išsaugoti ir išeiti: Išsaugokite pakeitimus ir išeikite iš BIOS / UEFI. Jūsų sistema bus paleista iš naujo, pritaikius naujus atminties nustatymus.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Priežiūra

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Laikyti švarų: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Tinkamas tvarkymas: When handling memory modules, always hold them by the edges to avoid touching the gold contacts or the integrated circuits.
• Temperatūros valdymas: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Trikčių šalinimas

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• Sistema nepaleidžiama:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Aptiktas neteisingas greitis:
  • Access your BIOS/UEFI settings and ensure the XMP profile yra įjungtas.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Sistemos nestabilumas arba gedimai:
  • Paleiskite atminties diagnostikos įrankį (pvz., „Windows Memory Diagnostic“ arba „MemTest86“), kad patikrintumėte, ar nėra klaidų.
  • Įsitikinkite, kad jūsų maitinimo blokas (PSU) tiekia pakankamą ir stabilų maitinimą visiems komponentams.
  • Check for proper cooling within your system to prevent overheating.

Specifikacijos

Garantija ir palaikymas

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą, kad galėtumėte patvirtinti garantiją.

HyperX Support: www.hyperx.com/support