Įvadas
Ačiū, kad pirkoteasing the Home Zone Security Motion Activated LED Security Light. This product is designed to provide reliable and efficient outdoor lighting with motion detection capabilities, enhancing the security of your property. Please read this manual thoroughly before installation and operation to ensure proper use and safety.
Saugos informacija
- ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.
- Šį gaminį pagal taikomą montavimo kodą turi sumontuoti asmuo, susipažinęs su gaminio konstrukcija ir veikimu bei susijusiais pavojais.
- Įsitikinkite, kad visos elektros jungtys yra saugios ir atitinka vietinius kodeksus bei potvarkius.
- Do not install near combustible materials or surfaces.
- Nežiūrėkite tiesiai į LED šviesos šaltinį, kai jis šviečia.
- This fixture is designed for outdoor use and should be mounted on a wall or eave.
Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- LED Security Light Fixture (1)
- Mounting Hardware Kit (screws, wire nuts, gasket) (1 set)
- Naudojimo instrukcija (1)
Sąranka ir diegimas
Reikalingi įrankiai: Screwdriver, Pliers, Wire Strippers, Electrical Tape, Safety Glasses, Ladder.
- Išjungti maitinimą: Prieš pradėdami, įsitikinkite, kad montavimo zonoje maitinimas yra išjungtas grandinės pertraukikliu arba saugiklių dėžute.
- Paruoškite montavimo paviršių: Choose a suitable outdoor location, preferably on a wall or eave, where the light can cover the desired area. The fixture should be mounted at a height of 6-10 feet (1.8-3 meters) for optimal motion detection.
- Pritvirtinkite montavimo plokštę: Pritvirtinkite tvirtinimo plokštę prie skirstomosios dėžutės naudodami pateiktus varžtus. Įsitikinkite, kad plokštė yra lygi ir stabili.
- Laidai: Connect the electrical wires from the fixture to your household wiring. Match the wires: Black to Black (Live), White to White (Neutral), and Green/Bare Copper to Green/Bare Copper (Ground). Use the provided wire nuts and secure connections with electrical tape.
- Tvirtinimo elementas: Carefully align the fixture with the mounting plate and secure it with the center screw. Ensure the gasket is properly seated to prevent water intrusion.
- Šviestuvų galvučių reguliavimas: Loosen the adjustment screws on the light heads and pivot them to the desired angles. Tighten the screws to secure their position.
- Judesio jutiklio reguliavimas: The motion sensor can be rotated horizontally and tilted vertically to cover the desired detection area. Ensure the sensor is not obstructed.
- Atkurti maitinimą: Kai įrengimas baigtas ir visos jungtys pritvirtintos, atkurkite elektros tiekimą automatiniu jungikliu.
An image showing the complete Home Zone Security motion-activated LED security light fixture, typically mounted on a wall.
Naudojimo instrukcijos
The motion sensor has adjustable settings to customize its operation:
- SENS (jautrumas): Controls the detection range of the motion sensor. Turn clockwise for higher sensitivity (longer range) and counter-clockwise for lower sensitivity (shorter range).
- LAIKAS: Sets how long the light remains on after motion is detected. Adjust from a few seconds to several minutes.
- LUX (aplinkos šviesa): Determines the ambient light level at which the sensor will activate the light. Set to the sun icon for daytime and nighttime operation, or to the moon icon for nighttime-only operation.
Important Note on Detection Zone: The motion sensor is designed to detect movement in front of the fixture. It may have limited or no detection directly below the light. For optimal performance, ensure the sensor is aimed to cover the desired area, typically at least 20 degrees outwards from the wall where it is mounted.
Priežiūra
- Valymas: Armatūrą nuvalykite minkšta, damp šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių, nes jie gali pažeisti apdailą ar elektrinius komponentus.
- Šviesos diodai: The LED light sources are integrated and not user-replaceable. Do not attempt to open the light heads.
- Patikra: Periodically check the fixture for any signs of damage, loose wiring, or corrosion.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia. | No power; faulty wiring; LUX setting too high for current ambient light. | Check circuit breaker; verify wiring connections; adjust LUX setting. |
| Šviesa dega nuolat. | Continuous motion detected; TIME setting too long; faulty sensor. | Ensure no constant motion in detection zone; reduce TIME setting; contact support if sensor is faulty. |
| Judesio jutiklis neaptinka. | SENS setting too low; sensor obstructed; detection zone issue. | Increase SENS setting; clear obstructions; adjust sensor angle to cover desired area, noting limited detection directly below the fixture. |
| Šviesos mirgėjimas. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
Specifikacijos
| Prekės ženklas | Namų zonos apsauga |
| Modelio numeris | AEC-34QA2-AC16W |
| Šviesos išvestis | 2500 liumenų |
| Šviesos šaltinio tipas | LED |
| Šviesos šaltinių skaičius | 2 |
| Maitinimo šaltinis | AC Powered (120 Volts Hardwired) |
| Vattage | 36 W |
| Medžiaga | Aliuminis |
| Naudojimas viduje / lauke | Lauke |
| Reikalingas surinkimas | Nr |
| Prekės svoris | 2.6 svaro |
| UPC | 823420944606 |
Garantija ir palaikymas
Home Zone Security products are designed for quality and reliability. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Home Zone Security website. Please have your model number (AEC-34QA2-AC16W) and proof of purchase ready when contacting support.