Victron Energy CCH024016000

„Victron Energy Centaur“ 24 voltų 16 Amp 3 banko akumuliatoriaus įkroviklis

Model: CCH024016000

1. Įvadas

This manual provides essential information for the safe and efficient operation of your Victron Energy Centaur 24-Volt 16 amp 3 Bank Battery Charger. The Centaur charger is designed for robust performance, featuring auto-ranging input and three isolated outputs for multi-battery setups. Please read this manual thoroughly before installation and use.

2. Saugos informacija

WARNING: Incorrect installation can be hazardous. Please consult a licensed professional and follow all applicable electrical codes during installation.

  • Ensure the charger is installed in a well-ventilated area.
  • Avoid exposing the charger to temperatures outside its operating range of -20 to 60°C (0 - 140°F).
  • Maintain humidity levels below 95% to prevent damage.
  • Nebandykite patys atidaryti ar taisyti įkroviklio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems specialistams.
  • Prieš atlikdami bet kokius prijungimus ar techninės priežiūros darbus, visada atjunkite maitinimą.

3. Pagrindinės savybės

  • Auto-Ranging Input: Covers 90-265VAC 50/60Hz, allowing use worldwide.
  • Three Isolated Outputs: Capable of simultaneously charging up to three battery banks, with each output supplying the full rated current.
  • Trys S.tage Įkrovimas: Features bulk, absorption, and float stages with temperature compensation for optimal battery health.
  • Internal Temperature Sense: Ensures power components operate within specified limits, automatically reducing output current under extreme environmental conditions if necessary.
  • Tvirta konstrukcija: Aluminium epoxy powder-coated cases with drip shield and stainless steel fixings provide durability in harsh environments, resisting heat, humidity, and salt air.
  • Apsauga nuo korozijos: Circuit boards are protected with an acrylic coating for maximum corrosion resistance.
Diagram illustrating key features of the Centaur battery charger, including full output power, three isolated outputs, three-stage charging, robust construction, and temperature sensors.

3.1 pav. Baigtaview of Centaur Charger Features

4. Specifikacijos

SpecifikacijaVertė
Prekės ženklas„Victron Energy“
Modelio numerisCCH024016000
Gaminio matmenys (D x P x A)4.3 colio x 8.5 colio x 14 colio (110 mm x 214 mm x 351 mm)
Prekės svoris8.4 svarų (3.8 kg)
Išėjimas ttage24 voltų
Įvesties tomastage90–265 VAC (50/60 Hz)
Dabartinis reitingas16 Amps
Išėjimų skaičius3
Akumuliatoriaus įkrovimo laikas4 Hours (absorption stage timer)
Darbinė temperatūra-20 to 60°C (0 - 140°F)
DrėgmėMaks. 95 % (nekondensuojantis)
Diagram showing the dimensions of the Centaur battery charger: 110 mm (4.3 inches) deep, 214 mm (8.4 inches) wide, and 351 mm (13.8 inches) high.

Figure 4.1: Centaur Charger Dimensions

5. Sąranka ir diegimas

Installation of the Centaur battery charger should only be performed by a qualified professional in accordance with all local and national electrical codes. Ensure proper ventilation and secure mounting of the unit.

The charger features three isolated outputs. Connect each output to a separate battery bank. The auto-ranging input allows connection to a wide range of AC power sources (90-265VAC, 50/60Hz) without manual adjustment.

Diagram showing the Centaur battery charger connected to three separate battery banks, illustrating its three isolated outputs.

Figure 5.1: Connecting to Multiple Battery Banks

6. Naudojimo instrukcijos

The Centaur charger employs a sophisticated three-stage charging algorithm to optimize battery charging and prolong battery life:

  1. Masė Stage: The charger delivers maximum current to rapidly charge the battery until the output current reduces to 70% of the rated Amps.
  2. Absorbcija S.tage: Kai urmu stage criteria are met, a 4-hour timer begins. During this period, the charger maintains a constant voltage to ensure the battery is fully charged. An internal temperature sensor compensates the charge voltage to prevent overcharging or undercharging based on ambient temperature. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel, or AGM batteries.
  3. Plūdė S.tage: Po absorbcijos stage timer concludes, the charger switches to a lower float voltage, kad akumuliatorius būtų visiškai įkrautas be perkrovimo.

7. Stebėjimas

7.1. Victron Remote Management (VRM)

The Victron Remote Management (VRM) portal allows you to monitor, manage, and optimize your Victron Energy systems remotely. It helps identify potential issues early by setting alerts and alarms. VRM is free and works with a GX-device (such as the Cerbo GX) with an internet connection or the GlobalLink 520 for smaller systems.

Video 7.1.1: Introduction to Victron Remote Management (VRM) portal, demonstrating how to check remote systems at a glance, manage devices with simple controls, monitor system performance in detail, and design safety nets with programmable alerts and alarms.

Screenshot of the Victron Remote Monitoring (VRM) portal dashboard showing system overview, energy flow, and performance data.

Figure 7.1.2: Victron Remote Monitoring (VRM) Interface

7.2. VictronConnect programa

The VictronConnect app allows you to configure, monitor, update, and diagnose your Victron product. It connects to Victron products via Bluetooth, USB, and WiFi/LAN/Internet, providing real-time data and control from your smartphone or tablet.

Video 7.2.1: Demonstration of the VictronConnect App, showing how to instantly check key monitoring data, see device performance, stay on top with simple controls, and perform easy configuration, firmware updating, and commissioning.

Multiple smartphone screens displaying the VictronConnect app interface, showing various monitoring and configuration options for Victron products.

Figure 7.2.2: VictronConnect App Interface

8. Priežiūra

To ensure optimal performance and longevity of your Centaur battery charger, follow these general maintenance guidelines:

  • Regularly inspect the charger and its connections for any signs of damage, corrosion, or loose wiring.
  • Įkroviklį laikykite švarų, be dulkių ir šiukšlių. Valymui naudokite sausą šluostę.
  • Užtikrinkite tinkamą vėdinimą aplink įrenginį, kad jis neperkaistų.
  • Reguliariai tikrinkite akumuliatoriaus gnybtų švarą ir tvirtumą.

9. Problemų sprendimas

If you encounter issues with your Centaur charger, consider the following basic troubleshooting steps:

  • Nėra galios: Check the AC input connection and ensure the power source is active. Verify all fuses and circuit breakers.
  • Nėra įkrovimo išvesties: Confirm battery connections are secure and correct polarity is observed. Check if the charger is in a fault state (refer to any indicator lights on the unit).
  • Perkaitimas: Ensure the charger has sufficient ventilation and is not obstructed. Verify ambient temperature is within operating limits.
  • Neįprasti garsai ar kvapai: Immediately disconnect power and contact qualified service personnel.

For complex issues or if troubleshooting steps do not resolve the problem, contact Victron Energy support or a certified technician.

10. Garantija ir palaikymas

The Victron Energy Centaur 24-Volt 16 amp 3 Bank Battery Charger comes with a 5 metų garantija. For warranty claims or technical support, please contact your authorized Victron Energy dealer or visit the official Victron Energy websvetainė, kurioje rasite kontaktinę informaciją ir pagalbos išteklius.

Official Victron Energy Websvetainė: www.victronenergy.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.