1. Įvadas
The Vivitar VIV-PGBT-T5I Battery Grip is designed to enhance the functionality and ergonomics of compatible Canon Rebel cameras. It allows for extended shooting times by accommodating two Li-ion batteries or six AA batteries. Additionally, it provides a comfortable grip for vertical shooting, featuring an extra shutter release button and control dials for convenient access to camera functions.
Image 1.1: The Vivitar VIV-PGBT-T5I Battery Grip. This image shows the battery grip attached to a camera body, highlighting its ergonomic design and the additional controls for vertical shooting.
2. Sąranka ir diegimas
2.1. Baterijų įdėjimas
The battery grip can be powered by either two compatible Li-ion batteries or six AA batteries using the included adapter plate.
- For Li-ion Batteries:
- Open the battery compartment door on the grip.
- Insert two fully charged Li-ion batteries, ensuring correct polarity as indicated inside the compartment.
- Tvirtai uždarykite baterijų skyriaus dureles.
- AA tipo baterijoms:
- Slide the AA battery adapter plate out of the grip.
- Insert six AA batteries into the adapter plate, observing the polarity markings.
- Slide the loaded adapter plate back into the grip until it locks into place.
2.2. Attaching the Grip to the Camera
- Įsitikinkite, kad jūsų kamera yra išjungta.
- Remove the camera's battery and the battery compartment door. Store the door in a safe place.
- Suderinkite akumuliatoriaus laikiklio tvirtinimo varžtą su fotoaparato trikojo lizdu.
- Insert the grip's electrical contact into the camera's battery compartment.
- Tighten the mounting screw on the grip until it is firmly attached to the camera. Do not overtighten.
3. Naudojimo instrukcijos
3.1. Įjungimas/išjungimas
After attaching the grip and installing batteries, power on your camera as usual. The grip's power button (if present and active) may need to be engaged to enable the grip's controls. Refer to your camera's manual for specific power management settings when using an external grip.
3.2. Vertical Shooting Controls
The Vivitar VIV-PGBT-T5I Battery Grip provides duplicate controls for comfortable vertical shooting.
- Užrakto atleidimo mygtukas: Use the grip's shutter release button for vertical shots. It functions identically to the camera's main shutter button, including half-press for autofocus and full-press for capturing an image.
- Valdymo ratukai: The front and rear control dials on the grip allow for quick adjustments to exposure settings (e.g., aperture, shutter speed) while holding the camera vertically.
- Other Control Buttons: Various other buttons on the grip replicate essential camera functions, providing convenient access without needing to reposition your hand.
4. Priežiūra ir priežiūra
- Keep the battery grip clean and dry. Use a soft, dry cloth to wipe off dust and smudges.
- Avoid exposing the grip to extreme temperatures, humidity, or direct sunlight.
- When not in use for extended periods, remove batteries from the grip to prevent leakage.
- Do not attempt to disassemble or repair the grip yourself. Contact qualified service personnel if issues arise.
5. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Griebimo valdikliai nereaguoja. |
|
|
| Camera not powering on with grip. |
|
|
6. Specifikacijos
- Modelis: VIV-PGBT-T5I
- Prekinis ženklas: „Vivitar“
- Suderinami tvirtinimo elementai: Canon EF (for compatible Canon Rebel cameras)
- Maitinimo šaltinis: 2 x Li-ion batteries or 6 x AA batteries (batteries not included)
- Įtraukti komponentai: Battery Grip, AA Battery Adapter Plate
- Spalva: Juoda
- Prekės svoris: Maždaug 0.9 svaro (be baterijų)
- Gamintojas: Sakar International, Inc.
7. Garantija ir palaikymas
Dėl garantijos informacijos ir techninės pagalbos žr. kartu su pirkiniu pateiktus dokumentus arba apsilankykite oficialioje „Vivitar“ svetainėje. websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
Gamintojas: Sakar International, Inc.
Modelio numeris: VIV-PGBT-T5I