HITBOX ARC 200A Stick Welder (Model ARC120) Instruction Manual

1. Svarbios saugos instrukcijos

Read and understand all safety warnings and instructions before operating this welding machine. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• Elektros šokas: Suvirinimo srovė gali būti mirtina. Nelieskite įtampingųjų elektros dalių. Mūvėkite sausas, izoliuojančias pirštines ir apsauginius drabužius.
• Dūmai ir dujos: Welding produces fumes and gases. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes and gases from the breathing zone.
• Lanko spinduliai: Arc rays can injure eyes and burn skin. Wear a welding helmet with a proper shade filter. Wear protective clothing to protect skin.
• Gaisras ir sprogimas: Suvirinimas gali sukelti gaisrą arba sprogimą. Laikykite degias medžiagas atokiau nuo suvirinimo zonos. Turėkite gesintuvą šalia.
• Karštos dalys: Welded parts are hot. Allow them to cool before touching.
• Elektromagnetiniai laukai (EMF): Welding current creates electromagnetic fields. Consult your physician if you have a pacemaker or other medical implant.

2. Produktas baigtasview

The HITBOX ARC 200A Stick Welder (Model ARC120) is a portable DC inverter welding machine designed for Stick (MMA) welding. It features a compact design, digital display, and adjustable current output for various welding tasks.

2.1 Komponentai ir valdikliai

2.1 pav.: priekis view of the HITBOX ARC 200A Stick Welder. Shows the digital display, adjustment knob, and positive/negative terminals.

Figure 2.2: Internal components of the HITBOX ARC 200A Stick Welder, highlighting the fan, high power capacitors, LED display, adjustment knob, IGBT, strong radiator, copper transformer, negative terminal, and positive terminal.

• Skaitmeninis ekranas: Rodo dabartinį suvirinimo amppakilimas.
• Reguliavimo rankenėlė: Naudojamas suvirinimo srovei nustatyti (ampera).
• Teigiamas gnybtas (+): Connects to the electrode holder cable.
• Neigiamas gnybtas (-): Connects to the work clamp kabelis.
• Maitinimo jungiklis: Located on the rear panel, turns the machine on/off.
• Aušinimo ventiliatorius: Located on the rear panel, ensures proper cooling during operation.

3. Specifikacijos

Figure 3.1: Dimensions of the HITBOX ARC 200A Stick Welder. Approximately 9 inches (23cm) wide, 6 inches (15.5cm) high, and 4 inches (10cm) deep.

Figure 3.2: Illustration of the 60% duty cycle, indicating the machine's operational capacity over a 10-minute period.

4. Sąranka

4.1 Išpakavimas ir patikrinimas

Carefully remove the welding machine and all accessories from the packaging. Inspect for any damage that may have occurred during shipping. Report any damage to your supplier immediately.

• Welding Machine (ARC120)
• Elektrodų laikiklis su kabeliu
• Darbas Klamp su Kabeliu
• Power Cord (NEMA L6-30P)

Figure 4.1: The HITBOX ARC 200A Stick Welder shown with its included electrode holder, work clamp, and power cord.

4.2 Elektros prijungimas

This machine operates on 220V AC power. Ensure your power supply meets the requirements. The power cord is equipped with a NEMA L6-30P plug. If your outlet is different, consult a qualified electrician for proper installation or use an appropriate adapter.

• Connect the power cord to a suitable 220V AC outlet.
• Ensure the power switch on the rear of the machine is in the "OFF" position before plugging in.

4.3 Kabelių jungtys

Prijunkite elektrodo laikiklį ir dirbkite clamp cables to the appropriate terminals on the front panel of the welding machine.

1. Insert the connector of the electrode holder cable into the Teigiamas (+) terminal and twist to secure.
2. Insert the connector of the work clamp kabelį į Neigiamas (-) terminal and twist to secure.
3. Pritvirtinkite darbo klamp tvirtai pritvirtinkite prie ruošinio arba suvirinimo stalo, užtikrindami gerą elektros kontaktą.

5. Naudojimo instrukcijos

5.1 Pasiruošimas suvirinimui

• Saugos įranga: Always wear appropriate personal protective equipment (PPE), including a welding helmet with a suitable shade, welding gloves, flame-resistant clothing, and safety shoes.
• Darbo sritis: Ensure your welding area is clean, well-ventilated, and free from flammable materials.
• Elektrodų pasirinkimas: Choose the correct type and size of electrode for your material and desired weld.

5.2 Suvirinimo procesas

1. Turn on the welding machine using the power switch on the rear panel.
2. Adjust the welding current using the adjustment knob on the front panel. The digital display will show the selected amperage. Refer to electrode manufacturer recommendations for appropriate current settings.
3. Insert the electrode into the electrode holder.
4. Position the work clamp tvirtai pritvirtintas prie ruošinio.
5. Uždekite lanką lengvai priliesdami elektrodą prie ruošinio ir greitai jį šiek tiek pakeldami, kad susidarytų lankas.
6. Maintain a consistent arc length and travel speed to achieve a quality weld.
7. After welding, turn off the machine and allow the workpiece to cool.

5.1 pav. Pvzamples of various weld beads, illustrating different appearances of completed welds.

6. Priežiūra

Regular maintenance ensures the longevity and safe operation of your welding machine. Always disconnect the power supply before performing any maintenance.

• Valymas: Reguliariai valykite įrenginio išorę sausa šluoste. Suslėgtu oru išpūskite dulkes ir šiukšles iš ventiliacijos angų.
• Kabelio apžiūra: Regularly inspect welding cables, electrode holder, and work clamp ar nėra pažeidimų, įpjovimų ar atsilaisvinusių jungčių. Nedelsdami pakeiskite pažeistus komponentus.
• Saugykla: Store the welder in a clean, dry environment when not in use.

7. Problemų sprendimas

8. Garantija ir palaikymas

For warranty information or technical support, please contact HITBOX customer service. Keep your purchase receipt as proof of purchase.

Visit the official HITBOX store for more products and support: HITBOX Store