Good Earth Lighting BO1065-WHG-06LF6-E

Ecolight 6-inch LED Motion Utility Light

Model: BO1065-WHG-06LF6-E | Brand: Good Earth Lighting

Įvadas

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolight Battery-Operated 6-inch LED Dual Lens Motion Utility Light. Please read this manual thoroughly before using the product to ensure proper function and safety.

Saugos informacija

  • Įsitikinkite, kad baterijos įdėtos teisingu poliškumu.
  • Nemaišykite senų ir naujų baterijų arba skirtingų tipų baterijų.
  • Išimkite baterijas, jei šviestuvas bus nenaudojamas ilgesnį laiką.
  • This product is designed for dry locations only. Avoid exposure to water or high humidity.
  • Laikyti vaikams nepasiekiamoje vietoje.

Pakuotės turinys

Prieš montuodami patikrinkite, ar yra visi komponentai:

  • 1 x Ecolight 6-inch LED Motion Utility Light
  • 3 x AA baterijos (pridedamos)
  • 4 x Small Damage-Free Picture Hanging Command Strips by 3M
Ecolight 6-inch LED Motion Utility Light packaging showing contents
Figure 1: Product packaging illustrating the included components.

Sąranka ir diegimas

The Ecolight Motion Utility Light is designed for easy, flexible, and damage-free mounting using the included 3M Command Strips. No wiring is required.

1 žingsnis: Paruoškite šviesą

  1. Nuimkite galinį žibinto dangtelį.
  2. Locate and remove the clear plastic tab from the battery compartment. This activates the included AA batteries.
  3. Uždėkite galinį dangtelį.
Į viršų view of the Ecolight 6-inch LED Motion Utility Light
2 paveikslas: viršuje view of the light, showing the motion sensor and light lenses.

2 žingsnis: Paruoškite montavimo paviršių

  • Choose a clean, dry, and smooth surface for mounting.
  • Clean the surface with rubbing alcohol and a clean cloth. Allow it to dry completely. Do not use household cleaners.

Step 3: Apply Command Strips

  1. Separate the two interlocking strips from each pair.
  2. Firmly press two strips together until they click. Repeat for all four strips.
  3. Remove the green liner from one side of each paired strip.
  4. Apply these strips to the designated flat areas on the back of the light. Press firmly.
  5. Remove the remaining liner from the exposed side of each strip.

Step 4: Mount the Light

  • Align the light with the prepared surface.
  • Press the light firmly against the surface for 30 seconds to ensure strong adhesion.
Ecolight 6-inch LED Motion Utility Light installed under a kitchen cabinet
Figure 3: The utility light installed under a cabinet, providing illumination.

For a visual guide on installation and removal, please refer to the official product video:

Video 1: Official installation and removal guide for the Ecolight Motion Utility Light. This video demonstrates the steps for setting up and safely removing the light using Command Strips.

Naudojimo instrukcijos

The Ecolight Motion Utility Light features motion-activated operation and an auto-off timer for energy efficiency.

  • Judėjimo aktyvinimas: The integrated 100-degree Passive Infrared (PIR) sensor detects motion up to 12 feet away. The light will only activate when it is dark and motion is detected, conserving battery life.
  • Automatinio išjungimo laikmatis: After the light activates and no further motion is detected, it will automatically turn off after 30 seconds.

Priežiūra

Baterijos keitimas

When the light output diminishes, it is time to replace the batteries.

  1. Carefully remove the light from its mounting surface. If using Command Strips, follow the removal instructions (pull tab straight down slowly).
  2. Nuimkite galinį žibinto dangtelį.
  3. Replace the three (3) AA batteries with new ones, ensuring correct polarity (+/-).
  4. Uždėkite galinį dangtelį.
  5. Re-mount the light using new Command Strips if necessary, following the installation steps.

The light is rated for 52 hours of illumination on a full battery charge.

Trikčių šalinimas

Problema Galima priežastis Sprendimas
Šviesa neįsijungia. Baterijos išsikrovusios arba neteisingai įdėtos. Pakeiskite baterijas, užtikrindami teisingą poliškumą.
Šviesa įsijungia dienos metu. Sensor is detecting insufficient ambient light. Ensure the light is installed in an area that is sufficiently dark for motion activation.
Light does not detect motion reliably. Sensor obstructed or outside detection range. Clear any obstructions from the sensor. Ensure motion occurs within 12 feet and 100 degrees of the sensor.
Šviesa per greitai užgęsta. No continuous motion detected within 30 seconds. This is normal operation. The light is designed to turn off after 30 seconds of no detected motion to conserve battery life.

Specifikacijos

  • Modelio numeris: BO1065-WHG-06LF6-E
  • Matmenys: 6 x 2.5 x 1.1 colio (I x P x A)
  • Prekės svoris: 6.4 uncijos
  • Maitinimo šaltinis: Battery powered (3 x AA batteries, included)
  • ttage: 4.5 volto (DC)
  • Vattage: 6 vatų
  • Lemputės tipas: LED
  • Šviesos srautas: 80 liumenų
  • Spalvos temperatūra: 4000K (Bright, neutral white light)
  • Judesio jutiklis: 100-degree PIR sensor, detects motion up to 12 ft.
  • Automatinio išjungimo laikmatis: 30 sekundžių (po to, kai neaptinkamas judesys)
  • Lamp Gyvenimas: Iki 30,000 valandų
  • Baterijos veikimo laikas: Approximately 52 hours of illumination on a full charge
  • Diegimo būdas: Wall-mounted (with included 3M Command Strips)
  • Naudojimas: Tik sausoje vietoje
  • Medžiaga: Plastikiniai
  • Spalva: Baltas

Garantija

This Ecolight Motion Utility Light comes with a 6 metų ribota garantija. For details regarding warranty coverage and claims, please refer to the product packaging or contact Good Earth Lighting customer support.

Palaikymas

For further assistance, technical support, or inquiries, please contact Good Earth Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official websvetainę.

Gamintojas: Geras Žemės apšvietimas

Websvetainė: Good Earth Lighting Store on Amazon

© 2024 Good Earth Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.