POTEK 5000W-MSW
POTEK 5000W Power Inverter Instruction Manual
Model: 5000W-MSW
Svarbios saugos instrukcijos
Please read and understand all safety instructions before installing or operating the POTEK 5000W Power Inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Laikykite keitiklį atokiau nuo vandens, drėgmės ir degių medžiagų.
- Užtikrinkite tinkamą vėdinimą aplink keitiklį, kad išvengtumėte perkaitimo.
- Neatidarykite keitiklio casing. Viduje nėra dalių, kurias galėtų aptarnauti vartotojas.
- Keitiklį junkite tik prie 12 V nuolatinės srovės maitinimo šaltinio.
- Always connect the ground wire properly to prevent electric shock.
- Disconnect the positive battery terminal before performing any wiring to the inverter.
- Avoid direct sunlight exposure; keep the inverter in a cool environment.
- Do not leave the power inverter in the ON position while your car is off to prevent battery drain.
Produktas baigtasview
The POTEK 5000W Power Inverter converts 12V DC battery power to 110V AC household power, providing a reliable power source for various electronic devices.
Savybės
- Provides 5000 watts continuous power, 10000 watts surge power.
- Equipped with 4 AC outlets and 2 USB ports (DC 5V/2A).
- Multi-protection features: overload, overheat, low voltage, didelis tūristage, ir trumpasis jungimas.
- Intelligent cooling fan operates silently when the heatsink temperature is below 104℉ (40℃), conserving battery power.
- Modified sine wave output.
Komponentai

Vaizdas: Priekyje ir gale view of the POTEK 5000W Power Inverter, highlighting AC outlets, USB ports, power switch, LED display, cooling fans, and battery terminals.
The inverter features 4 standard AC outlets and 2 USB ports on the front panel for connecting your devices. The rear panel includes terminals for connecting to a 12V DC battery, along with cooling fans to regulate internal temperature.
Sąranka ir diegimas
Kas yra dėžutėje
- 1x POTEK 5000W Power Inverter
- 6x Car Battery Cables (3 red, 3 black, 3.28 ft each)
- 1x vartotojo vadovas

Image: Dimensions of the POTEK 5000W Power Inverter and included battery cables and ground wire.
Inverterio prijungimas
- Įsitikinkite, kad keitiklio maitinimo jungiklis yra IŠJUNGTOJE padėtyje.
- Connect the red (positive) battery cables to the positive (+) terminal on the inverter and the positive (+) terminal on your 12V DC battery.
- Connect the black (negative) battery cables to the negative (-) terminal on the inverter and the negative (-) terminal on your 12V DC battery.
- Connect the green ground wire to the ground terminal on the inverter and to a suitable ground point (e.g., vehicle chassis or earth ground).
- Ensure all connections are tight and secure to minimize resistance and prevent overheating.

Image: Proper connection of the POTEK 5000W Power Inverter to a 12V DC battery with red (positive), black (negative), and green (ground) cables.
A tight connection between the ring terminal of the input cable and the battery terminal creates a larger contact area, which significantly reduces resistance, leading to lower operating temperatures and enhanced safety.
Montavimas
The inverter features mounting tabs on its corners, allowing it to be securely fastened to a flat surface in a vehicle, trailer, or other suitable location. Ensure the mounting location provides adequate ventilation and is protected from direct sunlight and moisture.
Naudojimo instrukcijos
Įjungimas/Išjungimas
- After all connections are secure, switch the inverter's power button to the ON position. A green indicator light will illuminate, confirming the inverter is active.
- To turn off, switch the power button to the OFF position.
Įrenginių prijungimas
- Prijunkite kintamosios srovės įrenginius į 110 V kintamosios srovės lizdus.
- Plug your USB-powered devices into the 5V/2A USB ports.
- Užtikrinkite bendrą vatątage of all connected devices does not exceed the inverter's continuous power rating of 5000W.
Išmanusis aušinimo ventiliatorius
The inverter is equipped with an intelligent cooling fan system. The fans will operate silently when the internal temperature is below 104℉ (40℃) and will increase speed as the temperature rises to maintain optimal operating conditions. This design helps conserve battery power during lighter loads.
Priežiūra
- Regularly check all cable connections for tightness and corrosion. Clean terminals as needed.
- Keep the inverter's ventilation openings clear of dust and debris to ensure efficient cooling.
- Kai nenaudojate, laikykite keitiklį vėsioje, sausoje vietoje.
- If the inverter will not be used for an extended period, disconnect it from the battery.
Trikčių šalinimas
The POTEK 5000W Power Inverter includes multiple protection features to safeguard itself and your devices. If the inverter stops functioning, check for the following:

Image: Diagram illustrating the multiple safety protections of the POTEK 5000W Power Inverter, including low-voltage, per ttage, overload, short-circuit, and over-temperature protection.
- Apsauga nuo perkrovos: If the total power draw of connected devices exceeds 5000W (continuous) or 10000W (surge), the inverter will shut down. Reduce the load and restart the inverter.
- Apsauga nuo perkaitimo: If the internal temperature becomes too high, the inverter will shut down. Allow it to cool down in a well-ventilated area before restarting. Ensure cooling fans are not obstructed.
- Žemas tomastage Apsauga: Jei įvesties DC ttage drops too low (e.g., due to a depleted battery), the inverter will shut down to protect the battery. Recharge or replace the battery.
- Aukštas tomastage Apsauga: Jei įvesties DC ttage exceeds safe limits, the inverter will shut down. Verify the input voltagiš savo maitinimo šaltinio.
- Trumpojo jungimo apsauga: In the event of a short circuit in the output, the inverter will shut down. Disconnect all devices, check for faults, and restart.
If the issue persists after checking these points, please contact customer service.
Specifikacijos
| Prekės ženklas | POTEK |
| Modelis | POTEK 5000W |
| Nuolatinė galia | 5000W |
| Didžiausia galia | 10000W |
| Įvesties tomastage | 12.8-13.2V DC |
| Išėjimas ttage | 110-125V kintamosios srovės |
| Išėjimo banga | Modifikuota sinusinė banga |
| USB išvestis | DC 5V/2A (2 ports) |
| AC lizdai | 4 |
| Prekės svoris | 22.5 svaro |
| Gaminio matmenys | 18.7 x 10.4 x 4.6 colio |
Garantija ir palaikymas
POTEK offers customer service for their products. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official POTEK websvetainę. Išsaugokite pirkimo čekį garantiniams reikalavimams.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.