APC Back-UPS Pro 1350VA UPS Battery Backup & Surge Protector BX1350M User Manual

Įvadas

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your APC Back-UPS Pro 1350VA Uninterruptible Power Supply (UPS). This device is designed to provide battery backup power and surge protection for electronic equipment, ensuring continuous operation during power outages and protection against damaging power fluctuations.

Figure 1: APC Back-UPS Pro 1350VA UPS, angled view.

Pakuotės turinys

Patikrinkite, ar jūsų pakuotėje yra šie elementai:

• APC Back-UPS Pro 1350VA UPS įrenginys
• Vartotojo vadovas (šis dokumentas)
• USB ryšio kabelis
• Koaksialinis kabelis

Sąranka

1. Pradinis akumuliatoriaus prijungimas

The UPS is shipped with the battery disconnected for safety during transit. Before initial use, the internal battery must be connected.

1. Place the UPS in its desired location. Ensure adequate ventilation around the unit.
2. Refer to the battery compartment access instructions (typically located on the bottom or rear of the unit) to connect the internal battery.
3. Saugiai uždarykite akumuliatoriaus skyrių.

2. Įrangos prijungimas

The UPS features two types of outlets: Battery Backup & Surge Protection, and Surge Protection Only.

Figure 2: Rear panel with outlets and communication ports.

• Baterijos atsarginis maitinimas ir viršįtampių apsaugos lizdai (5 lizdai): Prijunkite svarbią įrangą, pvz., kompiuterį, monitorių, išorinius standžiuosius diskus ir tinklo maršrutizatorių, prie šių lizdų. Šie įrenginiai maitinimo šaltinį gaus iš akumuliatoriaus.tage.
• Lizdai, skirti tik apsaugai nuo viršįtampių (5 lizdai): Prijunkite ne itin svarbią įrangą, pvz., spausdintuvus, skaitytuvus ar stalo kompiuteriusamps to these outlets. These devices are protected from surges but will not receive battery power during an outage.

3. Prijungimas prie elektros tinklo

Plug the UPS power cord into a grounded 120V AC wall outlet. Avoid using extension cords or surge protectors with the UPS.

4. Pradinis įkrovimas

Allow the UPS to charge for at least 24 hours before connecting any equipment to ensure maximum battery runtime. The UPS will provide surge protection even if the battery is not fully charged.

5. Data Line Protection

For network dataline protection, connect your network cable from the wall outlet to the 'IN' port on the UPS, and then connect a second network cable from the 'OUT' port to your device (e.g., computer, router). Similarly, use the coaxial cable ports for cable modem or TV protection.

UPS valdymas

Priekinio skydelio ekranas ir valdikliai

Figure 3: Front panel with LCD display and control buttons.

The front panel features an LCD display and control buttons for monitoring and managing the UPS.

• Maitinimo mygtukas: Įjungia arba išjungia UPS.
• Ekrano mygtukas: Cycles through various display screens showing information such as battery charge, estimated runtime, input/output voltage, and load.
• Nutildymo mygtukas: Nutildo garsinius signalus.

Automatinis ttage reglamentas (AVR)

UPS turi automatinį volų reguliatorių.tage reguliavimas (AVR), skirtas nedideliam tūrio ištaisymuitage fluctuations without switching to battery power. This extends battery life by reducing the frequency of battery usage.

PowerChute programinė įranga

For advanced management and automatic shutdown capabilities, connect the UPS to your computer using the provided USB cable. Download and install the PowerChute software from the APC websvetainė. Ši programinė įranga leidžia jums:

• Stebėkite UPS būseną ir maitinimo sąlygas.
• Configure automatic, graceful shutdown of your computer during extended power outages.
• View energy usage and cost.

For Mac OS, use native "Energy Saver" settings for UPS management.

Priežiūra

Baterijos keitimas

The APC Back-UPS Pro 1350VA features a user-replaceable battery (model APCRBC123, sold separately). Batteries typically last 3-5 years depending on usage and environmental conditions. Replace the battery when the UPS indicates a battery fault or when runtime significantly decreases.

1. Turn off all connected equipment and the UPS.
2. Atjunkite UPS nuo sieninio lizdo.
3. Follow the instructions provided with the replacement battery for safe removal of the old battery and installation of the new one.
4. Atsakingai perdirbkite senas baterijas.

Valymas

Periodically clean the exterior of the UPS with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are free from dust and debris.

Trikčių šalinimas

If the UPS is not operating correctly, consult the following table for common issues and solutions.

If problems persist after attempting these solutions, contact APC customer support.

Specifikacijos

Garantija ir palaikymas

For information regarding the manufacturer's warranty, please refer to the documentation included with your product or visit the official APC websvetainė. Taip pat gali būti galima įsigyti išplėstinius apsaugos planus.

For technical assistance or customer support, please visit the APC, kurį gamina „Schneider Electric Store“ or contact APC customer service directly.