Alpine X-W10D4

Alpine X-W10D4 X-Series 10-inch Subwoofer Instruction Manual

Model: X-W10D4

1. Baigėsiview

The Alpine X-W10D4 is a high-performance 10-inch subwoofer designed for car audio systems. Featuring dual 4-ohm voice coils, this subwoofer is engineered to deliver precise and powerful bass reproduction. It incorporates Alpine's 'Alpine ID' sound culture, focusing on spatial imaging and sound stage depth for an enhanced listening experience. This manual provides essential information for the proper installation, operation, and maintenance of your Alpine X-W10D4 subwoofer.

Alpine X-W10D4 10-inch subwoofer, front view

1 pav.: priekis view of the Alpine X-W10D4 10-inch subwoofer.

2. Pagrindinės savybės

  • 900W RMS Power Handling: Designed to pair effectively with high-power amplifiers, such as the X-Series X-A90M 900W mono ampgyvesnis.
  • 24mm Linear Xmax (1-way): Allows for significant cone excursion, contributing to deep and impactful bass.
  • Dual Spiders: Provides precise control over the large dynamic range of the subwoofer's movement.
  • Dual Shorting Rings: Ensures strong motor control, reducing total harmonic distortion (THD) and producing tight bass.
  • Center Pole Radial Heat Sink: Efficiently dissipates heat from the voice coil, ensuring long-term high output and reliability.
  • HAMR Surround: The High-Amplitude Multi-Roll surround allows for linear cone movement across its large excursion range.
  • Pulp/Mica Cone: Light yet rigid cone material for accurate bass with natural tone.
  • Twist-lock Trim Ring with Full Mesh Grill: Included for protection and a clean aesthetic.

3. Sąranka ir diegimas

Proper installation is crucial for optimal performance and longevity of your subwoofer. It is highly recommended that installation be performed by a qualified professional. Ensure all connections are secure and correctly polarized to prevent damage to the subwoofer or ampgyvesnis.

3.1 Laidų jungtys

The X-W10D4 features dual 4-ohm voice coils, offering flexibility in wiring configurations (series or parallel) to achieve the desired impedance for your ampgelbėtoją. Kreipkitės į savo amplifier's specifications for compatible impedance loads.

Alpine X-W10D4 subwoofer terminal connections

Figure 2: Subwoofer terminal connections for series or parallel wiring.

  • Serijos laidai: Connect the positive terminal of VC1 to the negative terminal of VC2. Connect the remaining negative terminal of VC1 and positive terminal of VC2 to the amplifier. This results in an 8-ohm load.
  • Lygiagretus laidas: Connect the positive terminals of VC1 and VC2 together. Connect the negative terminals of VC1 and VC2 together. Connect these combined positive and negative terminals to the amplifier. This results in a 2-ohm load.

3.2 Korpuso reikalavimai

The performance of the subwoofer is highly dependent on the enclosure design. Consult Alpine's official documentation or a car audio specialist for recommended sealed or ported enclosure volumes and dimensions to achieve optimal sound quality and output.

Alpine X-W10D4 subwoofer, rear view rodo motorinę struktūrą

3 pav.: galinis view of the Alpine X-W10D4 subwoofer, highlighting the robust motor structure.

4. Naudojimo instrukcijos

Once installed, proper tuning of your amplifier and head unit settings is essential for optimal subwoofer performance and system longevity.

  • Stiprinimo nustatymas: Nustatykite ampteisingai sureguliuokite liferio stiprinimą, kad jis atitiktų išėjimo garsumątagjūsų pagrindinio įrenginio. Nenustatykite per didelio stiprinimo, nes tai gali iškraipyti garsą ir sugadinti žemųjų dažnių garsiakalbį.
  • Crossover nustatymai: Naudokite žemo dažnio filtrą (LPF) savo įrenginyje. amplifier or head unit to send only low frequencies to the subwoofer. A typical LPF setting for a 10-inch subwoofer might be between 60Hz and 80Hz, but this can vary based on your full-range speakers and personal preference.
  • Pogarsinis filtras: Jei jūsų amplifier has a subsonic filter, engage it to protect the subwoofer from playing frequencies below its resonant frequency, which can cause excessive excursion and potential damage.
  • Įsilaužimo laikotarpis: Allow for a break-in period of several hours of moderate listening before operating the subwoofer at its maximum capabilities. This allows the suspension components to loosen and perform optimally.

5. Priežiūra

The Alpine X-W10D4 is designed for durability and requires minimal maintenance. Follow these guidelines to ensure its longevity:

  • Valymas: Use a soft, dry cloth to gently wipe away dust from the cone and surround. Avoid using harsh chemicals or excessive moisture.
  • Aplinkos apsauga: Ensure the subwoofer is installed in an environment protected from direct sunlight, extreme temperatures, and excessive moisture.
  • Patikra: Periodically check wiring connections for tightness and inspect the subwoofer for any signs of physical damage.

6. Problemų sprendimas

Jei kyla problemų dėl žemųjų dažnių garsiakalbio, žr. šiuos įprastus trikčių šalinimo veiksmus:

  • Nėra garso:
    • Check all power, ground, and remote turn-on connections to the ampgyvesnis.
    • Verify the RCA signal cables are securely connected to both the head unit and ampgyvesnis.
    • Užtikrinti, ampįjungtas lifer (patikrinkite maitinimo indikatoriaus lemputę).
    • Confirm the subwoofer wires are correctly connected to the ampkeltuvų gnybtai.
  • Iškraipytas garsas:
    • Sumažinti amplifier gain setting.
    • Check the head unit's volume level and bass boost settings; avoid excessive boosting.
    • Ensure the LPF (low-pass filter) is set appropriately and not too high.
    • Inspect the subwoofer cone and surround for any physical damage.
  • Žemųjų dažnių garsiakalbio perkaitimas:
    • Užtikrinti, ampžemųjų dažnių garsiakalbio varžos apkrova atitinka žemųjų dažnių garsiakalbio laidų konfigūraciją.
    • Verify proper ventilation around the ampgyvesnis.
    • Sumažinkite užsitęsusį didelio garsumo atkūrimą.

If these steps do not resolve the issue, consult a professional car audio technician or contact Alpine customer support.

7. Specifikacijos

SpecifikacijaVertė
Modelio numerisX-W10D4
Garsiakalbio tipasKomponentinis žemųjų dažnių garsiakalbis
Žemųjų dažnių garsiakalbio skersmuo10 colių
Balso ritėsDual 4-ohm
RMS galios valdymas900 vatų
Didžiausios galios valdymas2700 Watts (estimated based on typical RMS to Peak ratio)
Dažnio atsakas24Hz - 200Hz
Linear Xmax (1-way)24 mm
Montavimo gylis6-3/4 colio
MedžiagaAluminum (enclosure/frame)
Prekės svoris30 svaro
UPC793276040497

8. Informacija apie garantiją

The Alpine X-W10D4 subwoofer comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Alpine websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

9. Parama

For further assistance, technical support, or to find authorized service centers, please visit the official Alpine websvetainė adresu www.alpine-usa.com. You can also find additional resources, FAQs, and contact information there.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.