Ariete 2718 Xclean Robot Vacuum Cleaner User Manual

Įvadas

Thank you for choosing the Ariete 2718 Xclean Robot Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new robot vacuum. Please read this manual thoroughly before using the appliance and keep it for future reference.

Svarbios saugos instrukcijos

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using your robot vacuum cleaner:

• Prieš naudodami prietaisą perskaitykite visas instrukcijas.
• Šis prietaisas nėra skirtas naudoti asmenims (įskaitant vaikus), kurių fizinės, jutimo ar psichikos negalios arba neturintys patirties ir žinių, nebent už jų saugumą atsakingas asmuo juos prižiūrėtų arba instruktuotų, kaip naudoti prietaisą.
• Vaikus reikia prižiūrėti, kad jie nežaistų su prietaisu.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, such as gasoline, or in areas where they may be present.
• Neimkite nieko, kas dega ar rūko, pavyzdžiui, cigarečių, degtukų ar karštų pelenų.
• Plaukus, laisvus drabužius, pirštus ir visas kūno dalis laikykite toliau nuo angų ir judančių dalių.
• Naudokite tik taip, kaip aprašyta šiame vadove. Naudokite tik gamintojo rekomenduojamus priedus.
• Nenaudokite su pažeistu laidu ar kištuku. Jei prietaisas neveikia taip, kaip turėtų, buvo numestas, sugadintas, paliktas lauke arba įmestas į vandenį, grąžinkite jį į techninės priežiūros centrą.
• The robot is equipped with anti-fall sensors to prevent it from falling down stairs. However, always ensure the area around stairs is clear and well-lit for optimal sensor performance.

Pakuotės turinys

Carefully unpack your robot vacuum cleaner and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.

• Ariete 2718 Xclean Robot Vacuum Cleaner
• Įkrovimo bazė
• Maitinimo adapteris
• Nuotolinio valdymo pultas
• Šoniniai šepečiai (2 poros)
• HEPA filtras (iš anksto sumontuotas)
• Primary Filter (pre-installed)
• Šiukšliadėžė
• Valymo šepetys

Image: All included accessories for the Ariete 2718 Xclean Robot Vacuum Cleaner, including the dustbin, side brushes, HEPA and primary filters, remote control, and a small cleaning brush.

Produktas baigtasview

Susipažinkite su pagrindiniais savo roboto dulkių siurblio komponentais.

Robotas dulkių siurblys

• Main Body: Houses the motor, dustbin, and control electronics.
• Side Brushes: Sweep debris into the vacuum's path.
• Driving Wheels: Allow the robot to move across various surfaces.
• Universal Wheel: Provides directional movement.
• Dustbin: Collects dirt and debris.
• Control Panel/LCD Display: Shows status and allows manual operation.
• Charging Contacts: Connects with the charging base for power.
• Anti-Drop Sensors: Detects edges and stairs.
• Anti-Collision Sensors: Detects obstacles to prevent bumping.

Įkrovimo bazė

• Charging Contacts: Connect with the robot's charging contacts.
• Power Indicator: Shows charging status.
• Power Port: Connects to the power adapter.

Sąranka

1. Šoninių šepečių montavimas

Align the side brushes with the corresponding posts on the bottom of the robot and press firmly until they click into place.

2. Positioning the Charging Base

Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 1 meter (3 feet) of clear space on both sides and 2 meters (6 feet) in front of the charging base. Plug the power adapter into the charging base and then into a wall outlet.

3. Pradinis įkrovimas

Place the robot vacuum onto the charging base, ensuring the charging contacts on the robot align with those on the base. The robot will begin charging automatically. For first-time use, charge the robot for approximately 5 hours until fully charged. A full charge provides up to 1.5 hours (90 minutes) of cleaning time.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner docked on its charging base, which is connected to a power outlet, indicating the charging process.

4. Preparing the Cleaning Area

Before starting a cleaning cycle, remove any obstacles such as power cords, small rugs, toys, or other items that could entangle the robot or obstruct its path. The robot can navigate over low-pile carpets and hard floors.

Roboto valdymas

Maitinimo įjungimas/išjungimas

To power on the robot, press the main power switch located on the side of the unit. The LCD display will illuminate. To power off, press the switch again.

Valymo ciklo pradžia

Press the 'CLEAN' button on the robot's control panel or the remote control to start an automatic cleaning cycle. The robot will begin cleaning and select the most appropriate mode for the area.

Image: A user's hand pressing the 'CLEAN' button on the top panel of the Ariete 2718 Xclean Robot Vacuum Cleaner to initiate a cleaning cycle.

Valymo režimai

The Ariete 2718 Xclean offers 6 cleaning modes, selectable via the remote control or the robot's control panel:

• Automatinis režimas: The robot cleans randomly, adjusting its path based on obstacles and room layout.
• Kampų režimas: Robotas daugiausia dėmesio skiria valymui palei sienas ir kampus.
• Programavimo režimas: Allows you to set a delayed start time for cleaning.
• Along the Wall Mode: The robot follows walls to ensure edge-to-edge cleaning.
• „Spotlight“ režimas: Robotas valo koncentruotą plotą spirale, idealiai tinka labai užterštoms vietoms.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner actively cleaning a tiled floor in a living space, demonstrating its ability to navigate around furniture.

Nuotolinio valdymo pulto naudojimas

The remote control allows you to manually direct the robot, select cleaning modes, and initiate or pause cleaning cycles from a distance. Refer to the remote control diagram for button functions.

Delayed Start / Programming

To program a delayed start, use the 'PLAN' button on the robot or the remote control. You can set the robot to start cleaning after a specified number of hours. The robot does not have a real-time clock for daily scheduling, but rather a timer for delayed activation.

Automatinis grįžimas į įkrovimo stotelę

When the battery level is low, the robot will automatically return to its charging base to recharge. Ensure the charging base is accessible and unobstructed.

Priežiūra

Reguliarus techninis aptarnavimas užtikrina optimalų roboto dulkių siurblio veikimą ir pailgina jo tarnavimo laiką.

1. Šiukšlių dėžės ištuštinimas

The dustbin has a capacity of 300 ml and should be emptied after each cleaning cycle or when full. To empty:

1. Paspauskite dulkių surinktuvo atlaisvinimo mygtuką ir ištraukite dulkių surinktuvą.
2. Atidarykite šiukšliadėžės dangtį ir išmeskite susikaupusias šiukšles.
3. Close the lid and reinsert the dustbin into the robot until it clicks into place.

Image: A hand demonstrating the removal of the dustbin from the Ariete 2718 Xclean Robot Vacuum Cleaner for emptying or cleaning.

2. Filtrų valymas

The robot uses a primary filter and a HEPA filter. These should be cleaned regularly to maintain suction power.

• Išimkite šiukšliadėžę.
• Išimkite pagrindinį filtrą ir HEPA filtrą.
• Tap the filters gently to remove dust. Do not wash the HEPA filter with water. The primary filter can be rinsed with water if heavily soiled, but ensure it is completely dry before reinstallation.
• Surinkite filtrus ir dulkių konteinerį.

3. Šoninių šepečių valymas

Periodically check the side brushes for tangled hair or debris. Remove any obstructions by hand or using the provided cleaning brush. If brushes are worn, replace them with new ones.

4. Jutiklių valymas

Wipe the anti-drop sensors (located on the bottom of the robot) and anti-collision sensors (located on the front bumper) with a clean, dry cloth to ensure they function correctly.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner approaching a staircase, illustrating the function of its anti-fall sensors to prevent accidental drops.

5. Akumuliatoriaus priežiūra

To prolong battery life, ensure the robot is regularly charged. If storing the robot for an extended period, fully charge it and then power it off. Recharge every 3 months to prevent deep discharge.

Trikčių šalinimas

Jei kyla problemų dėl roboto dulkių siurblio, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

Specifikacijos

Garantija ir palaikymas

Dėl garantijos informacijos arba techninės pagalbos žr. prie gaminio pridėtą garantinę kortelę arba apsilankykite oficialioje „Ariete“ svetainėje. webNebandykite patys taisyti prietaiso, nes tai gali panaikinti garantiją.