1. Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of the MEAN WELL ELG-75-C700 Single Output Switching LED Power Supply. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image 1.1: The MEAN WELL ELG-75-C700 LED Power Supply, showing its compact metal casing and wiring connections.
2. Funkcijos ir pritaikymas
The ELG-75-C series is a 75W AC/DC LED driver featuring constant current mode and high output voltage. It operates from 180-295VAC and offers various models with different rated current ranges. Key features include:
- Constant current output with high output voltage (>60VDC).
- Universal AC input range: 180~295VAC only.
- Built-in active Power Factor Correction (PFC) function.
- Didelis efektyvumas iki 93%.
- Vėsinimas laisva oro konvekcija.
- Apsaugos: trumpasis jungimas, viršįtampistage, Per aukšta temperatūra.
- Output current adjustable via output cable or internal potentiometer (depending on model type).
- IP67 / IP65 design for indoor or outdoor installations.
- Tinka sausai, damparba drėgnose vietose.
- Suitable for LED lighting and street lighting applications.
- Atitinka 6 kV viršįtampių atsparumo lygį (IEC61000-4-5).
- No load power consumption <0.5W.
- HL tipo LED valdiklis, skirtas naudoti I klasės, 2 skyriaus pavojingų vietų šviestuvuose.
Typical applications for this power supply include LED street lighting, LED bay lighting, LED greenhouse lighting, and other Class I, Division 2 hazardous location luminaires.
2.1 vaizdas: Baigtaview of the ELG-75-C series features and typical applications, including LED street lighting and greenhouse lighting. This image also contains the model encoding information.
3. Model Encoding
The model number provides information about the specific configuration of the power supply:
ELG - 75 - CXXX [A/B/D/DA]
- ELG: Series Name
- 75: Output wattage (75 W)
- CXXX: Constant Current Output (e.g., C700 for 700mA)
- Tuščias tipas: IP67 rated. Cable for I/O connection.
- A tipo: IP65 rated. Constant current level adjustable through internal potentiometer.
- B tipo: IP67 rated. Built-in 3-in-1 dimming function (0~10VDC, PWM signal, or resistance).
- D-Type (option): IP67 rated. Smart Timing Dimming function.
- DA-Type (option): IP67 rated. DALI function.
Refer to Image 2.1 for a visual representation of the model encoding structure.
4. Specifikacijos
Detailed electrical and environmental specifications for the ELG-75-C series are provided below. Note that the ELG-75-C700 is specifically rated for 700mA output.
| Parametras | ELG-75-C350 | ELG-75-C500 | ELG-75-C700 | ELG-75-C1050 | ELG-75-C1400 |
|---|---|---|---|---|---|
| IŠVADA | |||||
| Nominali srovė | 350 mA | 500 mA | 700 mA | 1050 mA | 1400 mA |
| Nuolatinis dabartinis regionas | 107~214V | 75~150V | 53~107V | 35~71V | 27~54V |
| Nominali galia | 74.9W | 75W | 74.9W | 74.55W | 75.6W |
| Ripple & Noise (maks.) | 2Vp-p | 1.5Vp-p | 1.0Vp-p | 1.0Vp-p | 0.5Vp-p |
| Dabartinė tolerancija | ±5.0 % | ||||
| Dabartinis koreg. Diapazonas | Can be adjusted by internal potentiometer (for A-Type only) | ||||
| 175 ~ 350 mA | 250 ~ 500 mA | 350 ~ 700 mA | 525 ~ 1050 mA | 700 ~ 1400 mA | |
| Nėra apkrovos išvesties tomastage (maks.) | 224 V | 158 V | 114 V | 78 V | 61 V |
| Sąranka, pakilimo laikas | 500 ms, 100 ms esant pilnai apkrovai | ||||
| Palaukite laiko | 10ms esant pilnai apkrovai | ||||
| ĮVESTIS | |||||
| ttage Diapazonas | 180 ~ 295 VAC | ||||
| Dažnių diapazonas | 47-63Hz | ||||
| Power Factor (typ.) | PF > 0.95/230 VAC, PF > 0.92/277 VAC esant pilnai apkrovai | ||||
| Visiškas harmoninis iškraipymas | THD < 20% when output loading ≥50% at 230VAC input and output loading ≥75% at 277VAC input | ||||
| Efektyvumas (tip.) | 91 % | 91 % | 90 % | 90 % | 90 % |
| Kintamosios srovės srovė (tip.) | 0.45A/230VAC | 0.38A/277VAC | |||
| Įsiveržimo srovė (tip.) | COLD START 50A (twidth=350µs measured at 50% Ipeak) at 230VAC | ||||
| Maks. 16A grandinės pertraukiklio maitinimo šaltinių skaičius | 5 vnt. (B tipo grandinės pertraukiklis) / 8 vnt. (C tipo grandinės pertraukiklis) esant 230 VAC | ||||
| APSAUGA | |||||
| Nuotėkio srovė | <0.75mA / 277VAC | ||||
| Trumpasis jungimas | Žagsėjimo režimas, automatiškai atsistato pašalinus gedimo būklę | ||||
| Per ttage | 225~260V | 160~190V | 115~140V | 80~100V | 64~79V |
| Apsaugos tipas | Išjungti O/P voltage, vėl įjunkite atkūrimą | ||||
| Virš Temperatūra | Išjungti O/P voltage, vėl įjunkite atkūrimą | ||||
| APLINKA | |||||
| Darbo temp. | Tcase = -40 ~ +85°C (Refer to "Derating Curve") | ||||
| Maks. Korpuso temp. | Tcase = +85°C | ||||
| Darbinė drėgmė | 20 ~ 95% RH be kondensacijos | ||||
| Laikymo temperatūra, drėgmė | -40~+80°C, 10~95% RH | ||||
| Temp. Koeficientas | ±0.03%/°C (0~50°C) | ||||
| Vibracija | 10~500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||
| SAUGA IR EMC | |||||
| Saugos standartai | UL8750(Type HL), EN61347-1, EN61347-2-13 independent, EN62384, IP65 or IP67 approved | ||||
| Atlaikyti ttage | I/P-O/P:3.75KVAC, I/P-FG:2.0KVAC, O/P-FG:1.5KVAC | ||||
| Atsparumas izoliacijai | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH | ||||
| EMC emisija | Compliance to EN55015,EN61000-3-2 Class C (≥ 50% load); EN61000-3-3 | ||||
| EMC atsparumas | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge 6KV) | ||||
| KITI | |||||
| MTBF | 305Khrs min. MIL-HDBK-217F (25°C) | ||||
| Matmenys | 180*63*35.5 mm (ilgis*plotis*aukštis) | ||||
| Pakavimas | 0.7 kg; 16 vnt./12.6 kg/0.67 kuprinės | ||||
Image 4.1: Detailed specifications table for the ELG-75-C series, including output, input, protection, environment, safety, EMC, and other parameters.
5. Sąranka ir diegimas
Proper installation is crucial for the safe and reliable operation of the LED power supply. Refer to the mechanical specifications for dimensions and mounting options.
5.1 Laidų jungtys
- Įvestis (AC): Connect the AC input wires (Blue for Neutral, Brown for Line) to your main power source. Ensure the input voltage yra nurodytame 180–295 VAC diapazone.
- Išvestis (DC): Connect the DC output wires (Black for -V, Red for +V) to your LED lighting fixture. Observe correct polarity.
- Įžeminimas: Ensure the power supply is properly grounded to prevent electrical hazards.
5.2 Montavimas
- Mount the power supply in a location that allows for adequate air circulation to facilitate cooling by free air convection.
- The unit is IP67/IP65 rated, making it suitable for indoor or outdoor installations, including dry, damparba drėgnose vietose.
- Refer to the mechanical drawings in Section 11 for mounting hole dimensions and overall unit size.
For detailed installation instructions, please refer to the official MEAN WELL installation manual available on their websvetainė: meanwell.com/webnet/search/InstallationSearch.html
Image 5.1: Mechanical specifications for B-Type/DA-Type models and a reference to the online installation manual.
6. Naudojimo instrukcijos
6.1 Pagrindinės operacijos
Once properly installed and connected, the ELG-75-C700 will provide a constant current output to the connected LED load. Ensure the LED load's voltage requirements fall within the power supply's constant current region (53~107V for C700 model).
6.2 Output Current Adjustment (A-Type)
For A-Type models, the constant current level can be adjusted via an internal potentiometer. This allows fine-tuning of the output current within the specified adjustment range (350~700mA for C700 A-Type).
6.3 Dimming Operation (B-Type)
B-Type models feature a 3-in-1 dimming function, allowing adjustment of the output current via 0~10VDC, PWM signal, or resistance. The dimming wires are typically DIM+ (Blue) and DIM- (White).
- 0~10VDC Dimming: Connect a 0~10VDC dimmer to the DIM+ and DIM- terminals. 0V typically corresponds to 0% output, and 10V to 100% output.
- PWM Signal Dimming: Connect a PWM signal source to the DIM+ and DIM- terminals. The frequency range for PWM dimming is typically 100Hz ~ 3KHz.
- Resistance Dimming: Connect a variable resistor (potentiometer) between DIM+ and DIM-. The resistance value will determine the output current level.
Caution: Do not connect "DIM-" to "-V" (output negative terminal).
Image 6.1: Diagram illustrating the dimming operation for B-Type models, showing connections for 0-10VDC, PWM, and resistance dimming, along with corresponding characteristic curves.
7. Veikimo charakteristikos
7.1 Block Diagram, Derating Curve, and Static Characteristics
The internal block diagram illustrates the functional stages of the power supply, including EMI filter, PFC circuit, power switching, rectifiers & filter, and protection circuits (O.T.P., O.L.P., O.V.P.). The derating curve indicates the maximum permissible output load as a function of the case temperature (Tcase). The static characteristics graph shows the relationship between output load and input voltage, demonstrating stable output performance across the input voltage asortimentas.
Image 7.1: This image displays the functional block diagram of the ELG-75-C series, the derating curve showing load percentage versus case temperature, and the static characteristics graph illustrating load percentage versus input voltage.
7.2 Power Factor, Efficiency, and Driving Methods
The power factor characteristic graph illustrates the power factor (PF) at different load levels for various input voltages (277V and 230V), highlighting the built-in active PFC function. The efficiency vs. load graph demonstrates the power supply's efficiency at different load percentages, showing that the ELG-75-C series achieves high efficiency, up to 93%. The ELG-75-C series is designed to operate in constant current mode (CC) to drive LED modules, as shown by the typical LED power supply I-V curve which includes the constant current area and hiccup protection.
Image 7.2: This image presents graphs for the power factor characteristic, efficiency versus load, and the typical I-V curve for driving LED modules.
8. Priežiūra
The ELG-75-C700 LED power supply is designed for reliable operation with minimal maintenance. Follow these guidelines:
- Valymas: Periodically inspect the unit for dust or debris accumulation, especially around cooling surfaces. Clean with a soft, dry cloth if necessary. Ensure power is disconnected before cleaning.
- Apžiūra: Regularly check wiring connections for any signs of damage, corrosion, or loose terminals.
- Aplinka: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature failure.
- Nėra dalių, kurias galėtų remontuoti naudotojas: Do not attempt to open or repair the power supply. Doing so will void the warranty and may expose you to hazardous voltages.
9. Problemų sprendimas
If you encounter issues with your ELG-75-C700 power supply, consider the following common troubleshooting steps:
- Nėra išėjimo galios:
- Verify that the AC input power is connected and within the specified voltage diapazonas (180-295VAC).
- Check for tripped circuit breakers or blown fuses in the input line.
- Įsitikinkite, kad visos laidų jungtys yra saugios ir teisingos.
- The unit may be in protection mode (e.g., short circuit, over voltage, over temperature). Disconnect power, wait a few minutes, and reapply.
- LEDs Flickering or Dim:
- Check the LED load for proper connection and ensure it is compatible with the power supply's constant current output.
- If using a dimming function (B-Type), verify the dimmer is correctly connected and functioning. Ensure DIM- is not connected to -V.
- Confirm the ambient temperature is within the operating range to avoid thermal derating.
- Perkaitimas:
- Ensure adequate ventilation around the power supply. Do not obstruct airflow.
- Verify the load is not exceeding the rated power of the unit.
- Check the ambient temperature.
If the problem persists after performing these checks, contact qualified service personnel or MEAN WELL technical support.
10. Saugos informacija
ĮSPĖJIMAS: Elektros smūgio pavojus. Montavimą ir techninę priežiūrą turėtų atlikti tik kvalifikuoti darbuotojai.
- Prieš montuodami, atlikdami techninę priežiūrą ar šalindami triktis, visada atjunkite maitinimą.
- Užtikrinkite tinkamą įrenginio įžeminimą.
- Do not operate the power supply beyond its specified ratings (voltage, srovė, temperatūra).
- Do not expose the unit to excessive moisture or extreme temperatures outside its operating range.
- Įsitikinkite, kad visa instaliacija atitinka vietinius ir nacionalinius elektros kodeksus.
- This device is a Type HL LED Driver for use in Class I, Division 2 hazardous location luminaires. Adhere to all relevant safety standards for such environments.
11. Mechaninės specifikacijos
The following diagrams provide the mechanical dimensions and outlines for different types of the ELG-75-C series power supplies. All dimensions are in millimeters (mm).
11.1 Blank-Type / D-Type and A-Type
Image 11.1: Mechanical drawings for Blank-Type, D-Type, and A-Type ELG-75-C series models, showing dimensions, case temperature measurement point, and the location of the internal potentiometer for A-Type.
11.2 B-Type / DA-Type
Image 11.2: Mechanical drawing for B-Type and DA-Type ELG-75-C series models, showing dimensions and dimming wire connections.
12. Garantija ir palaikymas
The MEAN WELL ELG-75-C700 LED Power Supply comes with a 5 metų garantija nuo pirkimo datos. Ši garantija apima medžiagų ir gamybos defektus normaliai naudojant.
For warranty claims, technical support, or further assistance, please contact your authorized MEAN WELL distributor or visit the official MEAN WELL websvetainė kontaktinei informacijai.
Oficialus Websvetainę: www.meanwell.com