BLACK+DECKER BMT108C 108-Piece Hand Tool Kit User Manual

1. Įvadas

This manual provides essential information for the safe and effective use, maintenance, and storage of your BLACK+DECKER BMT108C 108-Piece Hand Tool Kit. This comprehensive tool set is designed to assist with various home and office repair, maintenance, and DIY tasks. Please read these instructions carefully before using the tools.

2. Bendra saugos informacija

Always observe basic safety precautions when using hand tools to reduce the risk of injury. Keep this manual for future reference.

• Dėvėkite tinkamas asmenines apsaugos priemones (AAP) such as safety glasses, gloves, and sturdy footwear.
• Inspect tools before use. Nenaudokite pažeistų ar susidėvėjusių įrankių.
• Naudokite darbui tinkamą įrankį. Using a tool for a purpose for which it was not designed can cause damage to the tool and injury to the user.
• Laikykite įrankius švarius ir sausus. Store them in their designated places in the case to prevent loss and damage.
• Saugokite vaikus ir pašalinius asmenis iš darbo zonos.
• Ensure adequate lighting in your work area.
• Nepersistenkite. Visada išlaikykite tinkamą koją ir pusiausvyrą.
• Atjunkite maitinimą before working on electrical systems. Use the electrical tester to confirm circuits are de-energized.

3. Produktas baigtasview

The BLACK+DECKER BMT108C kit includes 108 pieces, offering a versatile selection of hand tools for various tasks. The tools are organized in a durable blow-molded case for easy storage and transport.

Image: The BLACK+DECKER BMT108C 108-piece hand tool kit displayed open in its protective case.

3.1. Įtraukti komponentai

The kit contains the following tools and accessories:

Image: Measuring tools including a measuring tape, utility knife, steel ruler, and torpedo level.

• Measuring Tape (3m/10ft): For accurate length measurements.
• 18mm Snap-off Utility Knife: For cutting various materials. Features a snap-off blade design for fresh cutting edges.
• 150mm Steel Ruler: For precise linear measurements and straight-edge guidance.
• 225mm Torpedo Level: For checking horizontal, vertical, and 45-degree angles.

Image: Fastening and gripping tools including a claw hammer, water pump pliers, bit driver, drive ratchet, long nose pliers, and combination pliers.

• 8oz Claw Hammer: For driving and removing nails.
• 160mm Combination Pliers: Versatile pliers for gripping, bending, and cutting wires.
• 160mm Long Nose Pliers: For reaching into tight spaces, bending small wires, and holding small objects.
• Stubby Ratchet Screwdriver: A compact screwdriver with a ratcheting mechanism for efficient fastening.
• Reguliuojamas veržliaraktis: A versatile wrench with an adjustable jaw for various nut and bolt sizes.

Image: Cutting and driving tools including a screwdriver, utility knife, and mini hacksaw.

• Mini Hacksaw: For cutting small metal or plastic pieces.
• LED žibintuvėlis: Provides illumination for work in dimly lit areas.
• Electrical Tester (140mm): For safely checking the presence of electrical current.

Image: A selection of drive sockets and various screwdrivers.

• Hex Key Set (1.5mm - 10mm): For tightening or loosening hexagonal socket screws.
• Drive Sockets (1/4" Dr., 5mm - 13mm): For use with the ratchet handle to tighten or loosen nuts and bolts.
• Atsuktuvai:
  • Slotted: SL5 x 75mm, SL6 x 100mm
  • Phillips: PH1 x 75mm, PH2 x 100mm

Image: Various precision bits, 25mm bits, and 1/4 inch drive sockets for different screw types.

• 28mm Precision Bits:
  • Slotted: SL1, SL2, SL3
  • Phillips: PH00, PH0, PH1, PH2
  • Pozi: PZ0, PZ1
• 25mm Bits:
  • Slotted: SL1/8, SL3/16, SL1/4
  • Phillips: PH1, PH2
  • Torx: T15, T20
• Mūro grąžtai: For drilling into masonry surfaces.
• 5mm Insulated Tape: For electrical insulation.
• Assorted Screws and Wall Plugs: For various fastening applications.
• 18mm Snap-off Utility Blades (Refills): Replacement blades for the utility knife.
• Blow-Molded Storage Case: Keeps all tools organized and protected.

4. Sąranka ir saugojimas

The BLACK+DECKER BMT108C tool kit comes pre-organized in a durable blow-molded case. Proper organization ensures tool longevity and ease of access.

• Pirminė apžiūra: Upon receiving the kit, open the case and verify all 108 pieces are present and undamaged according to the product overview.
• Įrankio išdėstymas: Each tool has a designated slot within the case. Always return tools to their correct positions after use. This prevents tools from shifting during transport and reduces the risk of damage.
• Saugus užraktas: Ensure the case latches are securely closed before carrying or storing the kit.
• Sandėliavimo vieta: Store the tool kit in a dry, clean, and secure location, away from direct sunlight, extreme temperatures, and out of reach of children.

Image: The BLACK+DECKER BMT108C tool kit is shown open on a wooden floor, demonstrating its compact and accessible design for home use.

5. Naudojimo instrukcijos

This section provides general guidance for using common tools in the kit. Always refer to specific safety guidelines for each tool type.

5.1. Using the Hammer

• Hold the hammer firmly near the end of the handle for maximum leverage.
• Strike nails squarely to avoid bending them.
• Use the claw end to remove nails by prying them out.

5.2. Using Screwdrivers and Bits

• Select the correct screwdriver tip or bit size and type (Slotted, Phillips, Pozi, Torx) that matches the screw head.
• Apply firm, downward pressure while turning to prevent stripping the screw head.
• For the stubby ratchet screwdriver, adjust the collar for clockwise (tighten), counter-clockwise (loosen), or locked positions.

5.3. Using Pliers

• Use combination pliers for gripping, bending, and cutting wires.
• Use long nose pliers for precision work, reaching into confined spaces, and manipulating small components.
• Do not use pliers as a hammer.

5.4. Using the Adjustable Wrench

• Adjust the jaw opening to fit snugly around the nut or bolt head.
• Always pull the wrench towards the fixed jaw for maximum grip and to prevent slippage.

5.5. Using the Utility Knife

• Extend only the necessary amount of blade for the cut.
• Visada atsitraukite nuo savo kūno.
• When the blade becomes dull, snap off the worn segment using the integrated blade snapper or a separate tool, revealing a fresh, sharp edge.
• Store the knife with the blade retracted.

5.6. Using the Electrical Tester

• Before touching any electrical components, always confirm that the power is off.
• Insert the tip of the tester into the live slot of an outlet or touch it to a live wire.
• If the light inside the tester illuminates, electricity is present. Do not proceed until the circuit is de-energized.

6. Priežiūra

Reguliarus įrankių valymas užtikrina jų ilgaamžiškumą ir optimalų veikimą.

• Valymas: After each use, wipe tools clean with a dry cloth to remove dirt, grease, and moisture. For stubborn grime, use a mild cleaner and ensure tools are thoroughly dried afterward.
• Tepimas: Apply a light coat of machine oil to moving parts of pliers, wrenches, and other tools to prevent rust and ensure smooth operation.
• Ašmenų priežiūra: Replace dull utility knife blades promptly using the provided refills. Dispose of old blades safely.
• Saugykla: Always store tools in their designated slots within the blow-molded case. Keep the case closed and in a dry environment to prevent rust and damage.

7. Problemų sprendimas

This section addresses common issues you might encounter with hand tools.

• Tool Slippage: Ensure the tool (e.g., wrench, pliers) is correctly sized and fully engaged with the fastener. Avoid using worn tools.
• Stripped Screw Head: This often occurs from using the wrong size/type of screwdriver or insufficient downward pressure. Always match the bit to the screw and apply firm pressure.
• Rust on Tools: Rust is typically caused by moisture. Ensure tools are clean and dry before storage. Apply a thin layer of oil for protection.
• Pjovimo sudėtingumas: For utility knives, replace the blade. For hacksaws, ensure the blade is sharp and correctly tensioned.

8. Specifikacijos

9. Garantija ir palaikymas

BLACK+DECKER is committed to providing quality products. For warranty information, service, or support, please contact our customer care.

Image: BLACK+DECKER Total Care information, including sales and after-sales support, service network, warranty, original parts, information, and omnichannel support.

Klientų aptarnavimo kontaktai:

• Telefonas: 1800-203-0644 (pirmadieniais–šeštadieniais, 9.00–18.00 val. IST, išskyrus valstybines šventes)
• El. paštas: SBD-CUSTOMERCOMMUNICATIONS@SBDINC.COM
• WhatsApp: Scan QR code or click here
• Įgaliotų aptarnavimo centrų skaičius: 500+

Išsaugokite pirkimo įrodymą, kad galėtumėte kreiptis dėl garantijos.