JOHNCOO MT200R
JOHNCOO Titan Baitcasting Reel Instruction Manual
Model: MT200R
1. Įvadas
Thank you for choosing the JOHNCOO Titan Baitcasting Reel. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new fishing reel. Designed for both freshwater and saltwater environments, the Titan reel offers robust performance and durability. Please read this manual thoroughly before using your reel to ensure optimal performance and longevity.
2. Saugos informacija
Always prioritize safety when fishing. Observe the following guidelines:
- Elkitės atsargiai: Fishing hooks are sharp. Exercise caution when handling lures, lines, and fish to prevent injury.
- Line Tension: Be aware of line tension during casting and retrieving. Improper handling can cause line breaks or injury.
- Aplinkosauginis sąmoningumas: Be mindful of your surroundings, especially when casting, to avoid hitting people or objects.
- Vaikai: Keep fishing equipment out of reach of children.
3. Komponentai baigtiview
Familiarize yourself with the main parts of your JOHNCOO Titan Baitcasting Reel:

3.1 pav.: Išardytas view of the JOHNCOO Titan Baitcasting Reel, highlighting the main body, spool, and side plate.
- Rankena: Used for retrieving line.
- Žvaigždžių tempimas: Adjusts the drag pressure on the line.
- Spool Tension Knob: Controls the spool's free spin for casting distance and preventing backlash.
- Magnetic Brake System: Provides external casting control to minimize backlash.
- Šoninė plokštė: Removable cover for accessing the spool and internal components.
- Line Guide: Guides the fishing line evenly onto the spool.

3.2 vaizdas: View of the JOHNCOO Titan Baitcasting Reel with the side plate removed, revealing the internal gear system and spool for maintenance and inspection.
4. Sąranka
4.1 Ritės pritvirtinimas prie meškerės
- Sulygiuokite ritės kojelę su ritės laikiklio padėtimi ant meškerės.
- Tvirtai priveržkite ritės laikiklio veržlę, kol ritė bus tvirtai pritvirtinta ir nesvyruos.
4.2 Valo suvyniojimas
- Open the side plate to access the spool.
- Tie the fishing line to the spool using an arbor knot or similar secure knot.
- Close the side plate.
- Thread the line through the line guide and all guides on your fishing rod.
- Maintain light tension on the line as you reel it onto the spool, ensuring it lays evenly. Do not overfill the spool; leave about 1/8 inch (3mm) from the spool lip.
4.3 Initial Brake and Tension Adjustment
Proper adjustment of the brake system and spool tension is crucial for effective casting and preventing backlash.
- Spool Tension Knob: With a lure tied on, tighten the spool tension knob until the lure slowly falls when the thumb bar is pressed. Adjust as needed for different lure weights and casting conditions.
- Magnetic Brake System: The external magnetic brake system allows fine-tuning of casting control. Start with a higher setting (e.g., 7-10) to prevent backlash, especially for beginners or in windy conditions. As you gain experience, you can reduce the setting for longer casts.
5. Naudojimo instrukcijos
5.1 Liejimas
- Patogiai laikykite meškerę ir ritę.
- Paspauskite nykščio svirtį, kad atjungtumėte ritę.
- Use your thumb to lightly feather the spool, preventing it from spinning too freely.
- Make a smooth casting motion. As the lure flies, release thumb pressure.
- Just before the lure hits the water, apply light thumb pressure to stop the spool, preventing backlash (a bird's nest of tangled line).
5.2 Gavimas
Turn the handle to retrieve your line. The 7.1:1 gear ratio provides a fast retrieve, ideal for various fishing techniques.
5.3 Vilkimo reguliavimas

5.1 paveikslėlis: Stambus planas view of the reel's handle and star drag, used for adjusting line tension during a fight.
The star drag system allows you to control the amount of resistance the fish feels when pulling line from the reel. This reel offers a maximum drag of 13 kg (28 lbs).
- Tighten Drag: Pasukite žvaigždės formos stabdymo rankenėlę pagal laikrodžio rodyklę, kad padidintumėte stabdymo slėgį.
- Loosen Drag: Pasukite žvaigždės formos stabdymo rankenėlę prieš laikrodžio rodyklę, kad sumažintumėte stabdymo slėgį.
- Vilkimo nustatymas: A good starting point is to set the drag to approximately 25-30% of your line's breaking strength. Adjust as necessary during the fight to prevent line breakage or pulling the hook.
5.4 Anti-Reverse Feature
The reel is equipped with an anti-reverse feature, preventing the handle from turning backward. This ensures solid hook sets and prevents line slack during a fight.
6. Priežiūra
Regular maintenance will extend the life and performance of your JOHNCOO Titan Baitcasting Reel.
6.1 Po kiekvieno naudojimo
- Rinse (Saltwater): If used in saltwater, lightly rinse the reel with fresh water to remove salt residue. Nenardinkite ritės.
- Nuvalykite: Wipe the reel clean with a soft, dry cloth to remove dirt, grime, and moisture.
- Loosen Drag: Always loosen the drag completely before storing to prevent compression of the drag washers.
6.2 Periodic Maintenance (Monthly/Seasonally)
- Tepimas: Apply a small amount of high-quality reel oil to moving parts such as the handle knobs, worm shaft, and ball bearings. Use reel grease on gears. Refer to a reel schematic if available for specific lubrication points.
- Patikra: Check for any loose screws, worn parts, or damage. Address any issues promptly.
6.3 Saugykla
Store your reel in a cool, dry place, away from direct sunlight and extreme temperatures. Using a reel cover or case can protect it from dust and physical damage.
7. Problemų sprendimas
Čia pateikiami dažniausiai pasitaikančių problemų, su kuriomis galite susidurti, sprendimai:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Backlash (line tangle) | Spool spinning too fast; improper thumb control; brake/tension settings too low. | Increase magnetic brake setting; adjust spool tension knob; improve thumb control during casting. |
| Staigus arba šiurkštus atgavimas | Lack of lubrication; dirt/debris in gears; damaged components. | Clean and lubricate gears and bearings; inspect for damage. |
| Vilkite slystančiu arba nepastoviu būdu | Drag washers are dry, worn, or contaminated; drag not tightened sufficiently. | Ensure drag is tightened appropriately; inspect and clean/lubricate drag washers (use specialized drag grease if needed); replace worn washers. |
| Line not laying evenly on spool | Line guide issue; improper spooling. | Check line guide for obstructions or damage; ensure line is spooled with consistent tension. |
8. Specifikacijos

Image 8.1: Dimensions of the JOHNCOO Titan Baitcasting Reel.
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | MT200R |
| Grynasis svoris | 282 g |
| Pavaros santykis | 7.1:1 |
| Max Drag Power | 13 kg (28 svaro) |
| Linijos pralaidumas (mm/m) | 0.33/200, 0.38/150 |
| Rutuliniai guoliai | 11 + 1 BB |
| Medžiaga | Aluminum, Graphite |
| Rankų orientacija | Teisingai |
| Ypatinga funkcija | Atbulinės eigos stabdys |
| UPC | 712243106189 |
9. Informacija apie garantiją
JOHNCOO products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims. For detailed warranty information, please refer to the warranty card included with your product or contact JOHNCOO customer support.
10. Pagalba klientams
If you have any questions, require assistance with setup, operation, or maintenance, or need to report an issue with your JOHNCOO Titan Baitcasting Reel, please contact JOHNCOO customer support. Our team is dedicated to providing you with the best possible experience.
For support, please visit the official JOHNCOO websvetainėje arba susisiekite su savo pardavėju.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.