Solus SPC-320 Dusk-to-Dawn Photocell Sensor

Įvadas

The Solus SPC-320 Dusk-to-Dawn Photocell Sensor is designed to automate the operation of your outdoor lighting. This sensor detects ambient light levels, automatically turning your light fixture on at dusk and off at dawn, providing convenience and energy efficiency. It features an Ezee Change Plug for simplified replacement and is suitable for 3-inch lamp pranešimų.

Saugos informacija

• Prieš montuodami ar atlikdami techninę priežiūrą, visada atjunkite maitinimą nuo grandinės pertraukiklio.
• Montavimą turi atlikti kvalifikuotas elektrikas arba jis turi laikytis vietinių elektros kodeksų.
• Įsitikinkite, kad visos laidų jungtys yra tvirtos ir tinkamai izoliuotos.
• Do not immerse the photocell sensor in water.
• Patikrinkite ttage ir vattage ratings of your fixture are compatible with the sensor.

Įtrauktos dalys

• Photocell Photo Control Light Sensor
• Light Shield (optional)
• Tvirtinimo varžtai
• Vielos veržlės

Specifikacijos

Montavimo instrukcijos

This sensor is designed for easy installation into 3-inch lamp posts with a 1.375-inch diameter mounting hole. The Ezee Change Plug simplifies future replacements.

1. Atjunkite maitinimą: Before beginning any installation, ensure power to the lamp post is turned off at the circuit breaker.
2. Paruoškite montavimo vietą: If replacing an existing sensor, carefully remove the old unit. Ensure the mounting hole in the lamp post is approximately 1.375 inches (1 3/8 inches) in diameter.
3. Laidų jungtys: The sensor comes with an Ezee Change Plug and a wiring harness. If your existing setup does not have this plug, you will need to hardwire the harness first. Refer to the wiring diagram below for correct connections. Use the provided wire nuts to secure connections.
   • Prijunkite raudona viela from the photo-control to the black wire of the light fixture.
   • Prijunkite juoda viela from the photo-control to the black (supply) wire.
   • Prisijunkite all white wires together (neutral).
   • Prisijunkite green or bare wires together (žemė).
4. Prijunkite jutiklį: Once the harness is wired, plug the photocell sensor into the Ezee Change Plug connector.
5. Montavimo jutiklis: Insert the sensor into the mounting hole on the lamp post. Secure it using the provided mounting screws. Ensure the sensor face is unobstructed and points towards an open sky area for optimal light detection.
6. Optional Light Shield: If the sensor is exposed to direct artificial light sources at night (e.g., streetlights, porch lights) that might interfere with its operation, install the optional light shield to prevent premature turn-off.
7. Atkurti maitinimą: Kai įrengimas baigtas ir visos jungtys pritvirtintos, atkurkite elektros tiekimą automatiniu jungikliu.

Laidų schema

Operacija

Once installed and powered, the Solus SPC-320 Photocell Sensor will operate automatically. The built-in photocell detects the absence of sufficient natural light at dusk and activates the connected light fixture. Conversely, at dawn, when sufficient natural light is detected, the sensor will deactivate the light fixture. No manual intervention is required.

The sensor is compatible with various lighting types, including incandescent (up to 300W), LED (up to 60W), fluorescent (up to 39W), and HID (up to 100W) fixtures, making it versatile for residential and commercial applications.

Priežiūra

The Solus SPC-320 Photocell Sensor requires minimal maintenance. Periodically inspect the sensor's face to ensure it is clean and free from dirt, debris, or obstructions that could interfere with light detection. Gently wipe the sensor with a soft, damp cloth if cleaning is necessary. Do not use abrasive cleaners.

Garantija

The Solus SPC-320 Dusk-to-Dawn Photocell Sensor is backed by a 5-year warranty, providing peace of mind regarding its quality and durability.