Lepro Industrial LED Desk Lamp

Įvadas

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Šis universalus lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Prieš montuodami ir naudodami atidžiai perskaitykite šį vadovą ir išsaugokite jį ateičiai.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Saugos instrukcijos

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Naudokite tik E27 cokolio lemputes, kurių maksimali galiatage iš 40W.
• Nenaudokite lamp su pažeistu maitinimo laidu arba kištuku.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• Laikykite lamp toliau nuo degių medžiagų.
• Nebandykite išardyti ar taisyti lamp patys. Dėl remonto kreipkitės į kvalifikuotus darbuotojus.

Pakuotės turinys

Patikrinkite pakuotę, ar joje yra šie daiktai:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Vartotojo vadovas

Note: The E27 bulb is not included and must be purchased separately.

Sąranka ir diegimas

Follow these steps to assemble and install your desk lamp:

1. Pritvirtinkite Clamp: Saugiai pritvirtinkite clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Surinkite Lamp Galva: Įdiekite lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Atsargiai įkiškite lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Įdiekite lemputę: Įsitikinkite, kad lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp lizdas. Neperveržkite.
5. Prijunkite prie maitinimo: Prijunkite lampmaitinimo laidą į tinkamą elektros lizdą.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Paveikslėlis: Lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Naudojimo instrukcijos

Maitinimo įjungimas/išjungimas: Locate the rocker switch on the power cord. Press the switch to turn the lamp įjungti arba išjungti.

Šviesos kampo reguliavimas: Lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Paveikslėlis: Lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Priežiūra

Valymas: Norėdami išvalyti lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Lemputės keitimas: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp atgal į vidų.

Trikčių šalinimas

• Lamp neįsijungia:
  • Patikrinkite, ar maitinimo laidas tvirtai įkištas į lizdą.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Patikrinkite maitinimo lizdą prijungdami kitą įrenginį.
• Šviesa mirga:
  • Įsitikinkite, kad lemputė yra tvirtai įsukta.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp yra nestabilus:
  • Įsitikinkite, kad klamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Patikrinkite, ar lamp arm is properly inserted into the clamp jungtis.

Specifikacijos

Image: Product dimensions and key features like E27 bulb base and power cord length.

Garantija ir palaikymas

Garantija: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Klientų aptarnavimas: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.