SONICAKE ROCKSTAGE

SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

Model: ROCKSTAGE (QCE-10)

1. Įvadas

Ačiū, kad pirkoteasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Pagrindinės savybės

  • One-stop gig solution for classic rock players with all necessary core effects.
  • Analog Plexi-style distortion for 80s/90s hard rock tones.
  • Analog BBD-style chorus for warm, dreamy soundscapes.
  • 500ms analog voice delay and high-quality reverb for expansive, spacy tones.
  • Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Kas yra dėžutėje

  • SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
  • XLR kabelis
  • Maitinimo adapteris (9V DC)
  • Vartotojo vadovas

4. Sąrankos instrukcijos

4.1 Maitinimo jungtis

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Garso jungtys

  1. Gitaros įvestis: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
  2. Išvestis į Ampgelbėtojas/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
  3. Ausinių išvestis: For silent practice, connect headphones to the 'PHONES' jack.
SONICAKE RockStage pedal with input and output jacks
1 pav. Baigtaview of the SONICAKE RockStage pedal, showing input, output, and power connections.
SONICAKE RockStage pedal connected to guitar and ampgyvybingesnis
Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Naudojimo instrukcijos

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Efektų moduliai

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb
Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.
  • Choras: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
  • Rokas Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
  • Vėlavimas: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
  • Reverb: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Efektų aktyvavimas / deaktyvavimas

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted
Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage aplinkos.

SONICAKE RockStage pedal showing illuminated LED knobs
Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Perkeliamumas

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag
Figure 6: The compact design allows for easy transport and setup.

6. Specifikacijos

FunkcijaDetalė
Prekės ženklasSONICAKE
Modelio pavadinimasAKMENYSTAGE (QCE-10)
Matmenys40L x 7l x 5.5H cm
ttage9 voltų
Amppakilimas20 milijonųampčia
Garso išvesties efektaiOverdrive, Distortion, Chorus, Reverb, Delay
Valdymo tipasMygtukas, rankenėlė
Maitinimo šaltinisSu laidu elektra
Techninės įrangos sąsajaMultiple Audio
Signalo formatasAnaloginis
Jungties tipas3.5 mm garso jungtis
Kilmės šalisKinija

7. Priežiūra

  • Valymas: Pedalą valykite minkšta, sausa šluoste. Venkite naudoti abrazyvinius valiklius ar tirpiklius.
  • Saugykla: Pedalą laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
  • Tvarkymas: Venkite numesti pedalus ir nedarykite ant jų stiprių smūgių.
  • Galia: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Problemų sprendimas

  • Nėra garso:
    • Įsitikinkite, kad visi laidai yra tvirtai prijungti.
    • Verify the power adapter is correctly plugged in and providing power.
    • Check your guitar and ampLifier garsumo nustatymai.
    • Išbandykite su skirtingais kabeliais, kad išvengtumėte netinkamų jungčių.
  • Nepageidaujamas triukšmas / ūžesys:
    • Ensure you are using the correct power adapter.
    • Pabandykite naudoti kitą maitinimo lizdą.
    • Keep the pedal away from other electronic devices that may cause interference.
  • Effect Not Activating:
    • Press the footswitch firmly. The LED should illuminate.
    • Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Garantija ir palaikymas

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1 metų gaminio garantija nuo pirkimo datos.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE websvetainę.

Susiję dokumentai - AKMENYSTAGE

Preview Sonicake Sonic Ambience Dual-Effect Pedal Manual
User manual and specifications for the Sonicake Sonic Ambience compact dual-effect pedal, featuring delay and reverb modes.
Preview „Sonicake QGT-01“ kelioninės gitaros trumpas vadovas | Nešiojamas akustinis-elektrinis instrumentas
Oficialus trumpas „Sonicake QGT-01“ kelioninės gitaros vadovas. Sužinokite apie šio nešiojamojo akustinio-elektrinio instrumento savybes, surinkimą, valdiklius, efektus ir priežiūrą. Raskite trikčių šalinimo patarimų ir gaminio specifikacijų.
Preview „SONICAKE Pocket Master BT“ daugiafunkcio efektų procesoriaus naudotojo vadovas
Išsamus „SONICAKE Pocket Master BT“ daugiafunkcio efektų procesoriaus naudotojo vadovas, kuriame aptariami valdymo skydeliai, meniu naršymas, efektų redagavimas, nustatymai, trikčių šalinimas ir techninės specifikacijos. Apima išsamius įvairių efektų ir MIDI valdymo paaiškinimus.
Preview Sonicake Cloud Chorus - Minilane Series Analog Chorus Pedal
User guide and specifications for the Sonicake Cloud Chorus, a compact Minilane series analog chorus pedal featuring BBD-style sound.
Preview SONICAKE Smart Box Multi-Effects Processor BT User Manual
Comprehensive user manual for the SONICAKE Smart Box Multi-Effects Processor BT, detailing its features, operation, effects list, MIDI implementation, specifications, and troubleshooting guide.
Preview „SONICAKE Pocket Master“ daugiafunkcis efektų procesorius BT Naudotojo vadovas
„SONICAKE Pocket Master BT“ daugiafunkcio efektų procesoriaus naudotojo vadovas, kuriame aprašomas valdymo skydelio pristatymas, efektų redagavimas, nustatymai, būgnas, derintuvas, looperis, USB garso sąsaja, suderinama programinė įranga, efektų sąrašas, specifikacijos ir trikčių šalinimas.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.