Phasak PH 7322

PHASAK SIRIUS PH 7322 UPS 2260VA Uninterruptible Power Supply User Manual

Model: PH 7322 | Brand: Phasak

1. Įvadas

This manual provides essential instructions for the installation, operation, and maintenance of your PHASAK SIRIUS PH 7322 Uninterruptible Power Supply (UPS). The SIRIUS Interactive series offers reliable protection against power variations and spikes, ensuring stable and clean energy for connected equipment. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. Saugos instrukcijos

Observe the following safety precautions to prevent injury and damage to the UPS or connected equipment:

  • Neatidarykite UPS korpuso.asing. Viduje nėra dalių, kurias galėtų aptarnauti vartotojas. Visus techninės priežiūros darbus patikėkite kvalifikuotiems techninės priežiūros darbuotojams.
  • Do not connect appliances that could overload the UPS, such as laser printers, to battery-backed outlets (use surge-only outlets for these).
  • Ensure the UPS is placed in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • UPS junkite tik prie įžeminto kintamosios srovės lizdo.
  • In case of emergency, press the power button to turn off the UPS and disconnect it from the AC power source.
  • The UPS contains internal batteries. Do not dispose of the UPS or its batteries in fire. Batteries may explode.

3. Produkto ypatybės

The PHASAK SIRIUS PH 7322 UPS is equipped with several features designed for optimal performance and protection:

  • LCD / LED function display for real-time status monitoring.
  • Automatinis ttage Regulator (AVR) to stabilize input voltage nenaudodami akumuliatoriaus energijos.
  • Auto restart/auto-reload function for convenience after power restoration.
  • Compatibility with generators for flexible power input.
  • Communication: 1 x USB port for connection to a computer.
  • Outlets: 3 x Schuko outlets with battery backup and surge protection, and 1 x Schuko outlet with surge protection only.

4. Sąranka

4.1 Išpakavimas ir įdėjimas

  • Atsargiai išpakuokite UPS ir patikrinkite, ar nėra gabenimo pažeidimų.
  • Place the UPS on a flat, stable surface in a clean, dry, and well-ventilated environment. Avoid areas with excessive dust, humidity, or extreme temperatures.
  • Ensure there is adequate clearance around the UPS for proper airflow, especially around ventilation openings.

4.2 UPS prijungimas

Refer to the rear panel diagram for outlet identification.

Galinis view of PHASAK SIRIUS PH 7322 UPS showing power outlets, USB port, and circuit breaker.

Figure 1: Rear Panel Connections. This image displays the back of the PHASAK SIRIUS PH 7322 UPS, highlighting the four Schuko outlets (three with surge and battery backup, one with surge protection only), the USB communication port, and the circuit breaker button.

  1. Prijungimas prie kintamosios srovės maitinimo: Prijunkite UPS maitinimo laidą į įžemintą sieninį lizdą.
  2. Prijunkite įrangą:
    • Connect critical equipment (e.g., computers, monitors, network devices) to the Surge & Battery outlets (typically 3 outlets). These outlets provide both surge protection and battery backup during power outages.
    • Connect non-critical equipment that requires only surge protection (e.g., laser printers, scanners) to the Tik viršįtampis outlet (typically 1 outlet).
  3. USB ryšys: Connect the provided USB cable from the UPS USB port to your computer. Install the PowerGuide management software (available from Phasak's websvetainė), kad būtų įjungtos išplėstinės stebėjimo ir išjungimo funkcijos.

Prieš pirmą kartą naudodami, leiskite UPS įkrauti bent 8 valandas, kad užtikrintumėte pilną akumuliatoriaus įkrovą.

5. Operacija

5.1 Įjungimas / išjungimas

Priekyje view of PHASAK SIRIUS PH 7322 UPS showing LCD display and power button.

Figure 2: Front Panel Display and Controls. This image shows the front of the PHASAK SIRIUS PH 7322 UPS, featuring the LCD display that shows input/output voltage and status icons, and the main power button.

  • Norėdami įjungti: Press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the display illuminates.
  • Norėdami išjungti: Press and hold the power button for approximately 2 seconds until you hear a beep and the display turns off.

5.2 Informacija LCD ekrane

The LCD display provides real-time status information about the UPS:

  • Įvesties tomastage: Rodo esamą tūrįtage iš elektros tinklo.
  • Išėjimas ttage: Rodo ttage, kurią tiekia UPS prijungtai įrangai.
  • Baterijos lygis: Rodo likusį akumuliatoriaus įkrovą.
  • Apkrovos lygis: Rodo proctage prijungtos įrangos naudojamos UPS talpos.
  • Būsenos piktogramos: Various icons indicate operational mode (e.g., AC mode, battery mode, AVR active, fault). Refer to the full software manual for detailed icon explanations.

5.3 Automatinis ttage reglamentas (AVR)

UPS automatiškai ištaiso nedidelį garsumątage fluctuations (sags and surges) without switching to battery power, extending battery life and providing stable power to your devices.

5.4 Akumuliatoriaus režimas

Per galios outage, the UPS will automatically switch to battery power. An audible alarm will sound, and the display will indicate battery mode. The alarm will typically sound more frequently as the battery level becomes critically low, signaling that connected equipment should be safely shut down.

6. Priežiūra

  • Valymas: UPS išorę valykite sausa, minkšta šluoste. Nenaudokite skystų ar aerozolinių valiklių.
  • Akumuliatoriaus priežiūra: To maintain optimal battery life, ensure the UPS is connected to AC power at all times. If the UPS is stored for an extended period, recharge it every 3 months for at least 8 hours.
  • Baterijos keitimas: Batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
  • Vėdinimas: Regularly check that the ventilation openings are clear of dust and obstructions to prevent overheating.

7. Problemų sprendimas

ProblemaGalima priežastisSprendimas
UPS neįsijungia.No AC input power; Low battery; UPS fault.Ensure UPS is plugged into a live AC outlet. Allow UPS to charge for several hours. If problem persists, contact support.
UPS nuolat pypsi kintamosios srovės režimu.Perkrova; Vidinis gedimas.Reduce the load by disconnecting non-essential equipment. If problem persists, contact support.
UPS dažnai persijungia į akumuliatoriaus režimą.Unstable AC input power; AVR working.This may be normal if AC power is fluctuating. If it happens excessively, check the AC power source or contact an electrician.
Connected equipment loses power during outage.Equipment connected to surge-only outlet; Battery depleted; UPS overloaded.Ensure critical equipment is connected to battery-backed outlets. Allow battery to charge. Reduce load.

8. Specifikacijos

ModelisPH 7322
Prekės ženklasPhasak
Išėjimo vattage2260 vatų
Didžiausia galia2260 vatų
ttage220 V
Amppakilimas9 Amps
Iš viso maitinimo lizdų3 (Battery & Surge) + 1 (Surge Only)
Baterijos elementų sudėtisUždaryta švino rūgštis
Formos faktoriusStovas
Gaminio matmenys60 x 60 x 85 cm
Prekės svoris10.8 kilogramo
Ryšio uostas1x USB

9. Garantija ir palaikymas

All PHASAK Uninterruptible Power Systems come with a 2-year "In Situ" warranty. For technical support, warranty claims, or service inquiries, please contact your local Phasak distributor or visit the official Phasak websvetainė kontaktinei informacijai.

Please have your product model (PH 7322) and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.