TRUE GDM-19T-HC~TSL01

TRUE GDM-19T-LD stiklinių durų prekybininko naudotojo vadovas

Model: GDM-19T-HC~TSL01

Produktas baigtasview

The TRUE GDM-19T-LD Glass Door Merchandiser is a commercial refrigeration unit designed for displaying and storing various products. It features a single swing glass door, LED interior lighting, and adjustable wire shelves. This unit is engineered for energy efficiency and reliable temperature maintenance, typically maintaining temperatures between +33°F and +38°F.

TRUE GDM-19T-LD Glass Door Merchandiser, front view

Priekyje view of the TRUE GDM-19T-LD Glass Door Merchandiser, showcasing its single glass door and internal shelving.

Sąranka ir diegimas

Proper setup is crucial for optimal performance and longevity of your merchandiser. Follow these steps carefully:

  1. Išpakavimas: Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to your carrier.
  2. Vieta: Place the merchandiser on a level, sturdy surface capable of supporting its weight when fully loaded. Ensure adequate ventilation around the unit. Avoid direct sunlight or heat sources.
  3. Klirensas: Maintain a minimum of 3 inches (7.6 cm) clearance from walls or other obstructions on the sides and rear for proper airflow.
  4. Elektros jungtis: Connect the unit to a dedicated grounded electrical outlet. Refer to the specifications section for electrical requirements. Do not use extension cords.
  5. Pradinis valymas: Before first use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry.
  6. Lygiavimas: Use a level to ensure the unit is perfectly level. Adjust the leveling feet as needed.
  7. Shelving Installation: Install the adjustable wire shelves as desired. Ensure they are securely seated on the shelf clips.
TRUE GDM-19T-LD Glass Door Merchandiser, interior view su lentynomis

Interjeras view of the merchandiser, showing the adjustable wire shelves and LED lighting.

Naudojimo instrukcijos

Once installed, operating your TRUE merchandiser is straightforward:

  • Maitinimas: Plug the unit into the electrical outlet. The internal lighting and refrigeration system will activate.
  • Temperatūros valdymas: The unit is designed to maintain a temperature between +33°F and +38°F (0.5°C and 3.3°C). The temperature control is typically located inside the unit or on the front panel. Adjust as necessary within the recommended range.
  • Produktų įkėlimas: Load products evenly on the shelves. Do not block the air vents inside the unit, as this can impede airflow and affect cooling efficiency.
  • Durų valdymas: Ensure the glass door closes completely after each opening to maintain internal temperature and energy efficiency. The door features a self-closing mechanism.
  • Atitirpinimo ciklas: This unit features an automatic defrost system. During defrost, the evaporator coil is warmed to melt any accumulated ice. Water drains into an evaporator pan and is evaporated.

Priežiūra

Regular maintenance ensures efficient operation and extends the life of your merchandiser.

Kasdienė priežiūra:

  • Wipe down the exterior and interior surfaces with a clean cloth and mild, non-abrasive cleaner.
  • Check that the door gasket is clean and sealing properly.

Mėnesinė priežiūra:

  • Kondensatoriaus ritės valymas: The condenser coil should be cleaned monthly or more frequently in dusty environments. Unplug the unit before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the coil. A dirty coil reduces efficiency and can lead to compressor failure.
  • Patikrinkite, ar maitinimo laidas nepažeistas.

Kasmetinė priežiūra:

  • It is recommended to have a qualified refrigeration technician inspect the unit annually for optimal performance.

Trikčių šalinimo vadovas

Before calling for service, please check the following common issues:

ProblemaGalima priežastisSprendimas
Įrenginys neaušinamas
  • Maitinimo laidas atjungtas
  • Suveikė grandinės pertraukiklis
  • Temperatūros valdiklis nustatytas per aukštai
  • Nešvari kondensatoriaus ritė
  • Netinkamai užsidaro durys
  • Įjunkite įrenginį
  • Iš naujo nustatykite pertraukiklį
  • Sureguliuokite temperatūros valdymą
  • Išvalykite kondensatoriaus ritę
  • Check door gasket and alignment
Per didelis triukšmas
  • Įrenginys ne lygis
  • Atsipalaidavę komponentai
  • Išlyginkite įrenginį
  • Contact service if noise persists
Vanduo ant grindų
  • Drenažo linija užsikimšusi
  • Evaporator pan overflowing
  • Clear drain line
  • Susisiekite su tarnyba

Specifikacijos

FunkcijaDetalė
Prekės ženklasTIESA
ModelisGDM-19T-HC~TSL01
Talpa19 kubinių pėdų
Diegimo tipasPastatomas
Durų skaičius1 (stiklas)
Atitirpinimo sistemaAutomatinis
Lentynos tipasWire (4 adjustable shelves)
Temperatūros diapazonas+33°F iki +38°F (0.5°C iki 3.3°C)
Išorinė apdailaNon-chip, non-peel vinyl (Black or White) or Stainless Steel
Vidaus apdailaNSF approved white anodized aluminum
ApšvietimasStandard LED interior lighting

Garantija ir palaikymas

For warranty information and technical support, please refer to the official TRUE Manufacturing website or contact their customer service department. Keep your purchase receipt and model number readily available when contacting support.

Apsaugos planai galimi ilgesniam laikotarpiui:

  • 2 metų apsaugos planas: 159.99 USD
  • 3 metų apsaugos planas: 239.99 USD
  • Visapusiška apsauga (mėnesinė): 16.99 USD per mėnesį

Dėl papildomos pagalbos galite apsilankyti TRUE Store on Amazon.

© 2024 TRUE Manufacturing. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.